US Stove Company 2927 - Manuals

CAUTION: NOT ALL FIREPLACES ARE SUITABLE FOR INSTALLATION OF A COAL HEATER. REPAIR PARTS AUTOMATIC COAL BURNING CIRCULATOR HEATER MODEL NUMBER 2927 (SEE PAGE 16) KEY NO. PART NO. DESCRIPTION QTY. 1 89411 Mesh Brass Trim (LH/RH) 2 2 89410 Mesh Brass Trim (TOP, BOTTOM) 2 3 89413 Cabinet Front Trim (LH...

FIREPLACE INSTALLATION Connection of the stovepipe directly intothe existing masonry chimney over thefireplace opening is the only approvedmethod. This installation performs bet-ter, yielding easy to clean and inspectfor creosote. Before beginning this typeof installation plan carefully; a high de-g...

SERVICE HINTS Do not expect a heater to draw. It is thechimney that creates the draft. Smokespillage into the house or excessivebuild-up of water or creosote in thechimney are warnings that the chimneyis not functioning properly. Possiblecauses are: 1. The connection pipe may be pushedinto the chimn...

SUGGESTIONS FOR BURNING ANTHRACITE COAL 1. With coal it is important to maintain aclean chimney. The chimney connectorand chimney should be inspected at leasttwice monthly during heating season.2. Keep the grate clear of ash and cinders.Use the shaker grate to keep the ashesfrom building up in the f...

OPERATING INSTRUC- TIONS FUELEgg size Bituminous coal for residentialfurnaces, or any of the specially pack-aged fireplaces coals can be used.Coal with a low ash content (2% to 6%)is recommended. NOTE: Store coal in a dry, well-venti-lated area. LIGHTING1. Set the thermostat on "High" formax...