U-Line 30 - Manuals

6 Table of Contents Introduction Important Usage Instructions ........................................................................................2Important Safety Instructions ........................................................................................3Using this Manual ...............

7 Intr oduction Changing the Display Language ................................................................................78Changing the Remote Sensor Mode ..........................................................................79Other Camcorder Settings ..........................................

8 Checking Supplied Accessories The serial number of this product can be found at the battery attachment unit ofthe camcorder. Write down the number and other information here and retain thisbook as a permanent record of your purchase to aid identification in case of theft.Date of Purchase: Model Na...

9 Intr oduction E Components Guide OPTURA40/OPTURA30 REC SEARCH + button ( 27) / (fast forward) button ( 32) /CARD + button ( 112) REC SEARCH – button ( 27) / (record review) button ( 27) / (rewind) button ( 31) / CARD – button ( 112) DIGITAL EFFECTS button ( 64) DIGITAL EFFECTS ON/OFF button ( 64) ...

12 W T WIRELESS CONTROLLER WL-D83 START/STOP PHOTO ZOOM SELF T. D.EFFECTS ON/OFF SET MENU TV SCREEN REW PAUSE AV DV REMOTE SET SLOW 2 PLAY STOP FF ZERO SET MEMORY REC PAUSE 12bit AUDIO OUT DATE SEARCH DATA CODE AUDIO DUB. SLIDE SHOW CARD !8 q !9 e y u i !4 !3 !2 !6 !7 r t w @0 o @5 @6 @7 @2 @3 @4 @8...

13 Basic Functions - Preparations E Preparing the Power Supply Attaching the Battery Pack 1. Turn the POWER switch to OFF. 2. Move the viewfinder upward. 3. Attach the battery pack to the camcorder. • Remove the terminal cover of the battery pack. • Press lightly and slide it in the direction of the...

14 Using a Household Power Source 1. Turn the POWER switch to OFF. 2. Connect the power cord to the power adapter. 3. Plug the power cord into a power outlet. 4. Connect the power adapter to the camcorder’s DC IN terminal. ❍ Turn off the camcorder before connecting or disconnecting the power adapter...

16 Loading/Unloading a Cassette Use only videocassettes marked with the D logo. 1. Slide the OPEN/EJECT switch and open the cassette compartmentcover. The cassette compartment opens automatically. 2. Load/unload the cassette. • Load the cassette with the window facing the grip belt. • Unload the cas...

17 Basic Functions - Preparations E Installing the Backup Battery The backup battery allows the camcorder to retain date, time ( 21) and other camcorder settings while the power source is disconnected. Connect a power source to the camcorder when replacing the backup battery to retain the settings. ...

18 Preparing the Camcorder Adjusting the Viewfinder (Dioptric Adjustment) 1. Turn on the camcorder and keep the LCD panel closed. 2. Pull out the viewfinder. 3. Adjust the dioptric adjustment lever. Attaching the Lens Cap 1. Attach the cord to the lens cap. 2. Pass the grip belt through the loop on ...

19 Basic Functions - Preparations E Attaching the Shoulder Strap Pass the ends through the strap mount and adjust the length of the strap. SS-900Shoulder strap

20 Using the Wireless Controller Point it at the camcorder’s remotesensor when you press the buttons. Inserting Batteries The wireless controller operates with two AA (R6) batteries. 1. Open the battery cover. 2. Insert the batteries following the + and – markings. 3. Close the battery cover. ❍ Camc...

21 Basic Functions - Preparations E ( 37) Setting the Time Zone, Date and Time Set the time zone, date and time when you first start using your camcorder, or when you have replaced the backup battery. Setting the Time Zone/Daylight Saving Time 1. Press the MENU button to open the menu. 2. Turn the S...

22 7. Press the MENU button to close the menu and to start the clock. Once you have set time zone, date and time, you do not need to reset the clockeach time you travel to another time zone. Just set the time zone to the one ofyour destination, and the camcorder automatically adjusts the clock. 1 24...

23 Basic Functions - Preparations E Displaying Date and Time during Recording You can display the date and time in the lower left corner of the screen. 1. Press the MENU button to open the menu. 2. Turn the SET dial to select [DISPLAY SETUP/ ] and press the SET dial. 3. Turn the SET dial to select [...

24 Recording Movies on a Tape Before You Begin Recording Make a test recording first to check if the camcorder operates correctly. Before you make important recordings, clean the video heads ( 147). Recording 1. Remove the lens cap. 2. Set the camcorder to CAMERA mode. Set the POWER switch to CAMERA...

25 Basic Functions - Recording E ❍ Wait until the tape counter stops completely before you start recording. ❍ When you do not remove the cassette, you can record the next scene withoutproducing any noise or blank sections between the recordings even if you turnthe camcorder off. ❍ Bright light may m...

26 2. Turn the SET dial to select [DISPLAY SETUP/ ] and press the SET dial. 3. Turn the SET dial to select [LCD MIRROR] and press the SET dial. 4. Turn the SET dial to select [OFF]. 5. Press the MENU button to close the menu. When [LCD MIRROR] is set to [ON], only tape or card operation and self-tim...

27 Basic Functions - Recording E Reviewing and Searching when Recording Record Review In record pause mode, this function allows you to review the last few seconds of your recording to check if it has been recorded properly. Press and release the c (record review) button. The camcorder rewinds the t...

28 Zooming The camcorder automatically switches between optical zooming and digital zooming. Image resolution is slightly lower with the digital zoom. Optical Zoom Move the zoom lever toward W to zoom out (wide- angle). Move it toward T to zoom in (telephoto). Press the zoom lever slightly for a slo...

29 Basic Functions - Recording E Digital Zoom 1. Press the MENU button to open the menu. 2. Turn the SET dial to select [CAMERA SETUP] and press the SET dial. 3. Turn the SET dial to select [D.ZOOM] and press the SET dial. 4. Turn the SET dial to select a setting option. 5. Press the MENU button to ...

30 Tips for Making Better Videos Holding the Camcorder For maximum stability, grip the camcorder in your right hand and keep your right elbow pressed against your body. If necessary, support the camcorder with your left hand. Be careful that your fingers do not touch the microphone or lens. For More...

31 Basic Functions - Playback E Playing Back a Tape If the playback picture is distorted, clean the video heads using a Canon Head Cleaning Cassette or a commercially available digital video head-cleaning cassette ( 147). 1. Set the camcorder to PLAY (VCR) mode. Set the POWER switch to PLAY (VCR) an...

32 Special Playback Modes e / a (Playback Pause) To pause playback, press the e / a button during normal playback. 1 (Fast Forward Playback) / ` (Rewind Playback) Plays back the tape at 9.5 times normal speed (forward or reverse). Press and hold the button during normal playback or fast forward. – /...

33 Basic Functions - Playback E Adjusting the Volume When you use the LCD screen for playback, the camcorder plays back the sound via built-in speaker. The speaker does not sound when you close the LCD panel. Use headphones when using the viewfinder. When Using Headphones The headphones terminal als...

34 Playing Back on a TV Screen The AV terminal also serves as headphones terminal. When " H " is displayed on the screen, change the setting following the procedure below. Open the menu and select [VCR SETUP]. Select [AV/PHONES H ], set it to [AV] and close the menu. TVs with Audio/Video Ter...

36 Selecting the Audio Output Channel You can select the output channels when playing back a tape with audio recorded on two channels. 1. Press the MENU button to open the menu. 2. Turn the SET dial to select [AUDIO SETUP] and press the SET dial. 3. Turn the SET dial to select [OUTPUT CH] and press ...

37 Advanced Functions E Menus and Settings Many of the camcorder’s advanced functions are selected from menus that appear on the screen. Selecting Menus and Settings 1. Press the MENU button to open the menu. 2. Turn the SET dial to select a submenu and press the SET dial. 3. Turn the SET dial to se...

38 \ CARD MIX MIX TYPE CARD CHROMA , CARD LUMI., 117 CAM. CHROMA, C. ANIMATION ANIMAT. TYPE CORNER , STRAIGHT, RANDOM MIX LEVEL CAMERA SETUP SHUTTER AUTO , 1/60, 1/100, 1/250, 1/500, 1/1000, 56 1/2000 A.SL SHUTTER ON , OFF 57 D. ZOOM OPTURA40 OPTURA30 29 OFF, 56 × , 280 × OFF, 48 × , 240 × IMG STAB ...

42 CARD CAMERA MENU CARD PLAY CARD CAMERA PLAY (VCR) CAMERA CAMERA SETUP SHUTTER AUTO , 1/60, 1/100, 1/250 56 A.SL SHUTTER ON , OFF 57 D. ZOOM OPTURA40 OPTURA30 29 OFF , 56 × OFF , 48 × WHITE BAL. AUTO , SET W , INDOOR T , OUTDOOR U 54 AF AST LAMP* AUTO , OFF 103 FOCUS PRI. ON , OFF 107 ND AUTO , OF...

44 CARD PLAY MENU CARD PLAY CARD CAMERA PLAY (VCR) CAMERA CARD PRINT ORDERS NO ,YES 133 OPERATIONS ALL ERASE (Single Image TRANS.ORDERS NO ,YES 138 Display) ALL ERASEIMAGE ERASE CANCEL , SINGLE, ALL 116 FORMAT CANCEL , EXECUTE 121 CARD \ PROTECT 115 OPERATIONS(Index Screen) \ PRINT ORDER 132 \ TRANS...

45 Advanced Functions - Recording E Using the Recording Programs Easy Recording Program The camcorder adjusts focus, exposure and other settings automatically, allowing you to just point and shoot. Program AE Modes Auto The camcorder adjusts focus, exposure and other settings automatically. However,...

46 Availability of Functions in Each Mode: A: Auto setting h : Available × : Not available Shaded area: Can be used only in CAMERA mode.* OPTURA40 only. Selecting the Easy Recording Program Set the program selector to [ . “ [ ” appears. CARD PLAY CARD CAMERA PLAY (VCR) CAMERA Image Stabilizer ON Foc...

47 Advanced Functions - Recording E Selecting the Program AE Mode 1. Set the program selector to Q . 2. Press the SET dial. A list of the program AE modes appears. 3. Select a mode and press the SET dial. The symbol of the mode appears on the upper left corner of the screen. ❍ The setting resets to ...

48 Using the Night Modes 1. Set the program selector to Q . 2. Open the menu and select [CAMERA SETUP]. Select [NIGHT MODE], select a setting option and close the menu. 3. Press the NIGHT MODE button. • The symbol of the selected mode appears on the screen. • Pressing the NIGHT MODE button again res...

50 Skin Detail Function When shooting close-ups of people, the camcorder automatically softens details to reduce the appearance of skin imperfections for a more complimentary appearance. Open the menu and select [CAMERA SETUP]. Select [SKIN DETAIL], set it to[SOFT] and close the menu. ❍ Skin detail ...

51 Advanced Functions - Recording E Adjusting Exposure Manually Exposure Lock You can lock the exposure when recording in situations where the lighting may change suddenly to control the brightness of the image. 1. Set the program selector to Q . 2. Press the EXP button. • “E.LOCK ±0” appears on the...

52 Adjusting the Focus Manually Autofocus may not work well on the following subjects. In such case, focus manually. 1. Set the program selector to Q . 2. Adjust the zoom. When you operate the zoom after adjusting the focus, the subject may not stay in focus. Adjust the zoom before the focus. 3. Pre...

53 Advanced Functions - Recording E ❍ The setting resets to autofocus when you switch the program selector to [ . ❍ Readjust the focus when you have turned off the camcorder. Infinity Focus Use this function when you wish to focus on faraway subjects such as mountains or fireworks. Press the FOCUS b...

54 Setting the White Balance You can use the preset modes to reproduce colors more accurately, or set a custom white balance to obtain the optimal setting. 1. Set the program selector to Q . 2. For custom white balance: Point the camcorder at a white object and zoom in until it fills the whole scree...

56 Setting the Shutter Speed You can adjust the shutter speed manually to make stable shots of fast moving subjects. 1. Set the program selector to Q . 2. Set the program AE mode to the (Auto) mode. 3. Open the menu and select [CAMERA SETUP]. 4. Select [SHUTTER]. 5. Select the shutter speed and pres...

57 Advanced Functions - Recording E Auto Slow Shutter In Easy Recording mode and when [SHUTTER] is set to [AUTO] in Auto mode, the camcorder uses shutter speeds down to 1/30 in CAMERA mode and 1/15 in CARD CAMERA mode. This allows you to record brightly in places with insufficient lighting. However,...

58 Using the Self-Timer The self-timer can be used for recording movies and still images. When recording movies 1. Press the (self-timer) button. “ ” appears. 2. Press the start/stop button. • The camcorder starts recording after a 10-second countdown (2 seconds when using the wireless controller). ...

59 Advanced Functions - Recording E Changing the Recording Mode (SP/LP) You can choose between SP (standard play) and LP (long play). LP extends the tape usage by 1.5 times. To change to LP mode, open the menu and select [VCR SETUP]. Select [RECMODE], set it to [LP] and close the menu. ❍ Tapes recor...

60 Audio Recording Changing the Audio Mode You can record sound in two audio modes—16-bit and 12-bit. The 12-bit mode records sound on two channels (stereo 1), leaving 2 channels free (stereo 2) for adding new sound later. Select the 16-bit mode for higher sound quality. Open the menu and select [AU...

61 Advanced Functions - Recording E ❍ About the audio level indicator: When [MIC LEVEL] is set to [AUTO], the audio level indicator switches on andoff with each press of the AUDIO LEVEL button. ❍ The audio level can be changed when the green bar is displayed. Werecommend hiding the bar when you have...

62 Wind Screen The camcorder reduces wind noise automatically. However, you can turn off the wind screen when recording indoors, or when you want the microphone to be as sensitive as possible. Open the menu and select [AUDIO SETUP]. Select [WIND SCREEN], set it to[OFF] and close the menu. “WS | ” ap...

63 Advanced Functions - Recording E Recording with an External Microphone You can attach a commercially available microphone or the optional DM-50 Directional Stereo Microphone to the accessory shoe. Refer also to the instruction manual of the microphone. 1. Attach the microphone to the accessory sh...

64 The image gradually fades in. The image gradually fades out. Using Digital Effects Faders ( 67) Begin or end scenes with a fade to or from black. Fade Trigger (FADE-T) The image begins as a vertical line in thecenter and expands sideways until it fillsthe whole screen. The image is wiped off from...

66 Multi-Image Screen ( 69) Captures moving subjects in 4, 9 or 16 sequences of still images and displays them at one time. Sound will be recorded normally. 9 Sequences 4 Sequences 16 Sequences Effects ( 68) Add flavor to your recordings. Art (ART) The image becomes like apaint (solarization). Black...

67 Advanced Functions - Recording E Selecting a Fader In CAMERA mode, set the program selector to Q . 1. Press the DIGITAL EFFECTS button. [D.EFFECT | ], [FADER], [EFFECT] and [MULTI-S] appear. 2. Select [FADER]. 3. Select the fader option. 4. Press the DIGITAL EFFECTS button. The name of the select...

68 Selecting an Effect in CARD CAMERA Mode 1. Press the DIGITAL EFFECTS button. “BLK&WHT” flashes. 2. Press the ON/OFF button. • “BLK&WHT” stops flashing. • The effect can be activated/deactivated by pressing the ON/OFF button. CARD PLAY CARD CAMERA PLAY (VCR) CAMERA Selecting an Effect In C...

69 Advanced Functions - Recording E Using the Multi-Image Screen You can operate the multi-image screen only in the following playback modes: - When [S.SPEED] is set to [MANUAL]: Playback pause, slow forward/reverse playback - When [S.SPEED] is set to [FAST], [MOD.] or [SLOW]: Playback pause In CAME...

71 Advanced Functions - Playback E Magnifying the Image The playback image can be magnified up to 5 times. 1. Move the zoom lever toward T . • The image is magnified by 2 times. • A frame appears indicating the position of the magnified area. • To further enlarge the image, move the zoom lever towar...

72 Displaying the Data Code The camcorder maintains a data code containing recording date and time and other camera data such as shutter speed and exposure (f-stop). When you play back a tape, you can display the data code and select the data code combination you wish to display. Selecting the Date/...

73 Advanced Functions - Playback E Displaying the Data Code Press the DATA CODE button. ❍ The data code will not display the next time you turn on the camcorder. ❍ Only date and time appear in CARD PLAY mode. Six-Second Auto Date Date and time appear for 6 seconds when you begin playback, or to indi...

74 End Search When you have played back a tape, you can use this function to locate the end of the last recorded scene. In stop mode, press the END SEARCH button. • “END SEARCH” appears. • The camcorder rewinds/fast forwards the tape, plays back the last few seconds of the recording and stops the ta...

75 Advanced Functions - Playback E Returning to a Pre-marked Position If you wish to return to a particular scene later, mark the point with the zero set memory and the tape will stop at that point when you rewind/fast forward the tape. This function is operated with the wireless controller. 1. Pres...

76 Date Search You can locate the change of the date/time zone with the date search function. This function is operated with the wireless controller. Press the + or - button to begin searching. • Press more than once to search for further date changes (up to 10 times). • Press the STOP 3 button to s...

77 Advanced Functions - Other Functions E Customizing the Camcorder You can personalize your camcorder by customizing the start-up image and the sound it makes for start-up, shutter, operation and self-timer (collectively called the My Camera settings). Changing the My Camera Settings 1. Open the me...

78 Changing the Display Language The language used in the camcorder displays and menu items can be changed to German, Spanish, French, Italian, Russian, Simplified Chinese or Japanese. To change the display language, open the menu and select [DISPLAYSETUP/ ]. Select [LANGUAGE ], select a language an...

79 Advanced Functions - Other Functions E Changing the Remote Sensor Mode Two remote sensor modes and an off setting are available to prevent interference from other Canon wireless controllers being used nearby. Turning the Remote Sensor Off Open the menu and select [SYSTEM]. Select [WL.REMOTE], set...

80 Other Camcorder Settings Beep You will hear a beep upon camcorder operations such as power on/off, start/stop, self- timer countdown, and unusual conditions of the camcorder. If you turn off the beep, all camcorder sounds including the ones of the My Camera settings will be turned off. To turn th...

81 Advanced Functions - Other Functions E Turning Off the Image Stabilizer The image stabilizer compensates for camcorder shake even at full telephoto. It tries to compensate for horizontal movements; therefore, you may decide to turn it off when you mount the camcorder on a tripod. Open the menu an...

83 Editing E Recording to a VCR or Digital Video Device You can copy your recordings by connecting the camcorder to a VCR or a digital video device. If you connect a digital video device, you can copy recordings with virtually no generation loss in image and sound quality. Connecting the Devices q C...

85 Editing E Recording from Analog Video Devices (VCR, TV or Camcorder) You can record videos or TV programs from a VCR or analog camcorder on the tape in the camcorder. 1. Connect the camcorder to the analog video device. See Playing Back on a TV Screen ( 34). 2. Set the camcorder to PLAY (VCR) mod...

86 Recording from Digital Video Devices (DV Dubbing) You can record from other digital video devices equipped with a DV terminal with virtually no loss in picture and sound quality. 1. Connect the camcorder to the digital video device. See Connecting a Digital Video Device ( 83). 2. Set the camcorde...

88 Turning On the Analog-Digital Converter Open the menu and select [VCR SETUP]. Select [AV \ DV OUT], set it to [ON] and close the menu. ❍ Headphones cannot be used during analog-digital conversion. ❍ Depending on the signal sent from the connected device, the conversion fromanalog to digital signa...

89 Editing E Audio Dubbing You can add sound from audio devices (AUDIO IN) or with the built-in or an external microphone (MIC. IN). This function is operated with the wireless controller. Connecting q Connecting an Audio Device Refer also to the instruction manual of the connected device. w Connect...

91 Editing E Playing Back the Added Sound You can select to play back Stereo 1 (original sound), Stereo 2 (added sound), or adjust the balance of both sounds. 1. Open the menu and select [AUDIO SETUP]. Select [12bit AUDIO], select a setting and close the menu. • STEREO1: Plays back the original soun...

92 Connecting to a Computer Using a DV (IEEE1394) Cable You can transfer recordings to a computer equipped with a IEEE1394 (DV) terminal or IEEE1394 capture board. Use the editing software supplied with your computer/ capture board to transfer video recording from tape to computer. Refer to the inst...

93 Using a Memory Car d E Inserting and Removing a Memory Card You can use SD Memory Cards or commercially available MultiMediaCards with this camcorder. The SD Memory Card has a protect switch to prevent accidental erasure. Inserting the Card 1. Turn off the camcorder. 2. Open the cover. 3. Insert ...

94 Selecting the Image Quality/Size Changing the Still Image Quality You can choose from Superfine, Fine and Normal. Open the menu and select [CARD SETUP]. Select [IMG QUALITY], set it to[SUPER FINE] or [NORMAL] and close the menu. Changing the Still Image Size You can choose from 1632 × 1224 pixels...

95 Using a Memory Car d E Changing the Movie Size You can choose from 320 × 240 pixels and 160 × 120 pixels. Open the menu and select [CARD SETUP]. Select [MOVIE SIZE], set it to[160 × 120] and close the menu. ❍ Movies are recorded in the Motion JPEG format. ❍ Maximum recording time on a 8 MB SD Mem...

96 File Numbers Images are automatically assigned file numbers from 0101 to 9900 and stored in folders containing up to 100 images. Folders are assigned numbers from 101 to 998. (The sample images on the supplied memory card are saved in the [100canon] folder.) You can choose to use consecutive file...

97 Using a Memory Car d E Recording Still Images on a Memory Card You can record still images with the camcorder, from a tape in the camcorder or from devices connected via the DV terminal or AV terminal. You can also record a still image on the memory card while you record a movie on the tape. 1. S...

99 Using a Memory Car d E Recording from a Tape in the Camcorder 1. Play back the tape. 2. Press the PHOTO button halfway when the scene you wish to record appears. • The camcorder pauses playback. The remaining image capacity and other information appear. • When you press the PHOTO button on the wi...

100 When recording from a tape in the camcorder or other video devices: ❍ A still image recorded from an image in 16:9 format will be verticallycompressed. ❍ The data code of the still image will reflect the date and time it has beenrecorded on the memory card. ❍ The size of the still image will be ...

101 Using a Memory Car d E Using the Flash You can use the built-in flash for recording still images in dark places. The flash is equipped with the red-eye reduction mode that reduces the red-eye effect that occurs when recording people at night or in dark rooms. Selecting the Flash Mode Press the (...

102 Recording with Flash 1. Press the PHOTO button halfway. • “ ” appears in green. • In CAMERA mode, the flash can be used in record pause mode when [STILL I. REC] is set to [ FINE] or [ NORMAL]. 2. Press the PHOTO button fully. The flash fires. ❍ Do not fire the flash close to people’s eyes. ❍ Do ...

103 Using a Memory Car d E ❍ About the AF-Assist Lamp: When recording still images with flash, the AF-assist lamp (white LED) lights upresponding to the brightness of the subject to enable the camcorder to focusmore accurately. The AF-assist lamp lights up when you focus manually whilethe PHOTO butt...

104 Reviewing a Still Image Right after Recording You can select to display a still image for 2, 4, 6, 8 or 10 seconds after it has been recorded. Open the menu and select [CAMERA SETUP]. Select [REVIEW], select asetting option and close the menu. ❍ A still image is displayed as long as you hold the...

105 Using a Memory Car d E Recording Motion JPEG Movies on a Memory Card You can record Motion JPEG movies with the camcorder, from a tape in the camcorder or from devices connected via the DV terminal or the AV terminal. The sound of a movie recorded on a memory card will be monaural. 1. Press the ...

106 Screen Displays during Movie Recording q Card Access Display w Movie recording time e Image Size r Remaining Card Capacity forMovies Recording from Other Video Devices You can record movies from devices connected via the S-video terminal or AV terminal (analog line-in function), or via the DV te...

107 Using a Memory Car d E Selecting the Focusing Point The subject you wish to record is not always in the center of the screen. In the Focus- Priority mode, you can choose from one of three focusing points to automatically put the subject you wish into sharp focus. The exposure will be adjusted au...

108 Selecting the Drive Mode Changing the Drive Mode 1. Set the program selector to Q . 2. Press the DRIVE MODE button to switch between the drive modes. The setting changes with each press of the button. Continuous Shooting/High-Speed Continuous Shooting Press and hold the PHOTO button. A series of...

109 Using a Memory Car d E Auto Exposure Bracketing Press the PHOTO button. Three still images in different exposures are recorded to the memory card. Make sure that there is sufficient space on the memory card. CARD PLAY CARD CAMERA PLAY (VCR) CAMERA

110 Recording Panoramic Images (Stitch Assist Mode) You can shoot a series of overlapping images and merge them into one large panoramic scene using the supplied software (PhotoStitch) on a computer. When Recording in Stitch Assist Mode: PhotoStitch detects the overlapping portion of adjoining image...

111 Using a Memory Car d E 5. Record the second image so that it overlaps a portion of the first image. • Minor discrepancies in the overlapped area can be corrected with the software. • You can retake an image by pressing the CARD +/– button to return to the previous image. • A maximum of 26 images...

112 Playing Back a Memory Card You can display a single image, 6 at one time (index screen 113), or one after another (slide show 113). Use the Card Jump function to quickly locate an image without displaying them one by one ( 114). 1. Set the camcorder to CARD PLAY mode. 2. Press the CARD +/– butto...

113 Using a Memory Car d E ❍ Images not recorded with this camcorder, uploaded from a computer (exceptthe sample images 119), edited on a computer and images whose file names have been changed may not be played back correctly. ❍ Do not turn off the camcorder, change the position of the TAPE/CARD swi...

114 Card Jump Function You can locate images without displaying them one by one. The number in the upper right of the screen indicates the image number of the current image by the total number of images. Press and hold the CARD + or CARD – button. When you release the button, the image of the displa...

115 Using a Memory Car d E Protecting Images You can protect important images from accidental erasure when displaying a single image or index screen. If a memory card is formatted, all still images and movies, even protected ones,will be erased permanently. ❍ The sample images recorded on the suppli...

116 Erasing Images You can erase images singly or all at once. Be careful when erasing images. Erased images cannot be recovered. ❍ Protected images cannot be erased. ❍ Movies can only be erased when the first scene is displayed as a still image. Erasing a Single Image 1. Select the image you wish t...

119 Using a Memory Car d E 5. Select the mix type matching the sample image you have selected. • The screen shows the combined image. • When you have selected [C. ANIMATION], select [ANIMAT. TYPE] and select between [CORNER], [STRAIGHT] and [RANDOM]. 6. To adjust the mix level, select [MIX LEVEL] an...

121 Using a Memory Car d E Formatting a Memory Card Format new memory cards, or when you get the message “CARD ERROR”. You can also format a memory card to erase all data recorded on it. ❍ Formatting a memory card erases all data, including protected images. ❍ Images erased by formatting cannot be r...

122 Creating a Start-up Image You can create a start-up image using a still image on the memory card. 1. Select a still image with the CARD +/– buttons. 2. Open the menu and select [MY CAMERA]. 3. Select [CREATE START-UP IMAGE]. [SET THIS AS START-UP IMAGE?], [YES] and [NO] appears. 4. Select [YES]....

123 Direct Printing E Printing Still Images You can print still images by connecting the camcorder to a printer with Direct Print function. You can also use the print order settings for direct printing ( 132). Following printers can be connected to your camcorder: Connecting the Printer to the Camco...

124 ❍ If continues to flash (for more than 1 minute) or if , or does not appear, the camcorder is not correctly connected to the printer. In such case, disconnect the cable from camcorder and printer, turn off camcorderand printer, turn both back on and reconnect the camcorder to the printer. ❍ Do n...

125 Direct Printing E 2. Select the print settings ( 126). 3. Turn the SET dial to select [PRINT] and press the SET dial. • Printing starts. The print setting menu disappears when printing is complete. • If you wish to continue printing, select another still image with the CARD +/– button. ❍ Observe...

126 Selecting the Print Settings The procedure for selecting the number of copies and trimming ( 131) is common to all printers. Other print setting procedures vary depending on your printer model. Check which icon appears in the upper left corner of the camcorder screen after connecting, and refer ...

127 Direct Printing E Paper Settings 1. In the print setting menu, turn the SET dial to select [PAPER] and press the SET dial. 2. Turn the SET dial to select the paper size and press the SET dial. Select the paper size of the paper set in your printer. 3. Turn the SET dial to select the paper type a...

128 Setting the Print Effect (Image Optimize) This function uses the camcorder's recording information to optimize the image data, yielding high quality prints. 1. In the print setting menu, turn the SET dial to select (print effect) and press the SET dial. 2. Turn the SET dial to select a setting a...

129 Direct Printing E 3. Turn the SET dial to select the paper size and press the SET dial. • Select the paper size of the paper set in your printer. • Pressing the MENU button brings you back to the print settings menu. 4. Turn the SET dial to select (BORDERS) and press the SET dial. 5. Turn the SE...

130 Selecting the Image Style 2. Make sure that (IMAGE) is selected and press the SET dial. 3. Turn the SET dial to select the image style and press the SET dial. Pressing the MENU button brings you back to the print settings menu. Selecting the Borders 2. Turn the SET dial to select (BORDERS) and p...

131 Direct Printing E Trimming Settings Set the print style before you start with the trimming settings. 1. In the print setting menu, turn the SET dial to select [TRIMMING] and press the SET dial. The trimming frame appears. 2. Change the size of the trimming frame. • Move the zoom lever toward T t...

132 Printing with Print Order Settings You can select still images for printing and set the number of copies. These print order settings are compatible with the Digital Print Order Format (DPOF) standards and can be used for printing on DPOF compatible printers ( 123). A maximum of 998 still images ...

133 Direct Printing E Erasing All Print Orders 1. Open the menu and select [CARD OPERATIONS]. 2. Select [ PRINT ORDERS ALL ERASE]. “ERASE ALL PRINT ORDERS?”, [NO] and [YES] appears. 3. Select [YES]. All “ ” disappear. 4. Close the menu. Printing 1. Connect the printer to the camcorder ( 123). 2. Ope...

134 Connecting to a Computer Using a USB Cable You can download images from the memory card to a computer using the supplied software and USB cable. For details, refer to the Digital Video Software Instruction Manual . Users of Windows OS can transfer images by simply pressing the (print/share) butt...

135 Transferring Images E Direct Transfer You can transfer images to the computer with the (print/share) button. Preparations The first time you connect the camcorder to the computer, you need to install the software and set the auto-launch setting. 1. Install the supplied Digital Video Software. Se...

136 Transferring All Images, New Images or Images with Transfer Orders To transfer images with transfer order, you need to set the transfer orders ( 138). 1. Turn the SET dial to select [ ALL IMAGES], [ NEW IMAGES] or [ TRANSFER ORDERS]. 2. Press the button. • The images are transferred to the compu...

138 Selecting Images for Transfer (Transfer Order) You can select images for transfer to the computer. These transfer settings are compatible with the Digital Print Order Format (DPOF) standards. A maximum of 998 images can be selected. Do not connect a USB or DV cable to the camcorder while setting...

139 Additional Information E About the NETWORK Mode The NETWORK mode is for use with DV Messenger version 2 (Windows XP only). Set the camcorder to NETWORK mode and connect it to the computer using a USB cable or DV (IEEE1394) cable. For details on DV Messenger version 2, refer to the DV Network Sof...

140 Screen Displays Hiding the Displays on the LCD Screen You can hide the displays on the LCD screen to have a clear screen for playback. Open the menu and select [DISPLAY SETUP/ ]. Select [DISPLAYS], set it to [OFF <PLAYBK>] and close the menu. • Warning messages still appear, and the data c...

141 Additional Information E PLAY (VCR) Mode Screen Displays during Recording/Playback Zoom ( 28)Skin detail ( 50) Image stabilizer ( 81) Exposure ( 51)Program AE ( 45) Manual focus ( 52)White balance ( 54)Card mix ( 117)Digital effects ( 64) Date and time ( 21)AF/AE locked during still image record...

143 Additional Information E Message Explanation Memory card not is inserted into the camcorder. SD Memory Card is set for erasure prevention. Replace the card or change the position of the protect switch. No images are recorded on the memory card. A memory card error occurred. The camcorder cannot ...

144 Message Explanation Image is recorded in a not compatible JPEG format or another format not compatible with the camcorder, or the image file is corrupted. You attempted to set more than 998 transfer orders. You attempted to transfer a movie file as wallpaper. Some analog images cannot be recorde...

146 Maintenance/Others Camcorder Handling Precautions ❍ Do not carry the camcorder by the LCD panel or viewfinder. ❍ Do not leave the camcorder in places subject to high temperatures, such as a sun- heated car, and high humidity. ❍ Do not use the camcorder in places subject to magnetic or electric f...

147 Additional Information E ❍ At cold temperatures, the screen may be darker than usual. This is not a malfunction. The screen returns to normal when the camcorder warms up. Video Heads ❍ When the message “HEADS DIRTY, USE CLEANING CASSETTE” appears, or when the playback picture becomes distorted, ...

148 How to avoid condensation: ❍ Unload the cassette, place the camcorder in an airtight plastic bag and let it adjust to temperature changes slowly before removing it from the bag. When condensation is detected: ❍ The camcorder stops operating and the warning message “CONDENSATION HAS BEEN DETECTED...

149 Additional Information E ❍ Although the battery pack’s operating temperature range is from 32 ˚F to 104 ˚F (0 ˚C to 40 ˚C), the optimal range is from 50 ˚F to 86 ˚F (10 ˚C to 30 ˚C). At cold temperatures, performance will temporarily decline. Warm it in your pocket before use. ❍ Replace the batt...

150 Protecting Tapes from Accidental Erasure To protect your recordings from accidental erasure, slide the tab on the cassette to the left. (This switch position is usually labeled SAVE or ERASE OFF.) If you load a protected cassette in CAMERA mode, the message “THE TAPE IS SET FOR ERASURE PREVENTIO...

151 Additional Information E Using the Camcorder Abroad Power Sources You can use the compact power adapter to operate the camcorder and to charge battery packs in any country with power supply between 100 and 240 V AC, 50/60 Hz. Consult the Canon Service Center for information on plug adapters for ...

152 Troubleshooting If you have a problem with your camcorder, refer to this checklist. Consult your dealer or a Canon Service Center if the problem persists. Power Source Problem Cause Solution Battery pack is exhausted. Battery pack is not correctly attached. Battery pack is exhausted. Power save ...

156 System Diagram (Availability differs from area to area) VFL-1 Video Flash Light VL-3 Video Light DM-50 DirectionalStereo Microphone Stereo Microphone(commercially available) MultiMediaCard IFC-300PCU USB Cable Canon printers with direct print function /PictBridge-compliant printers PC Card Adapt...

157 Additional Information E Optional Accessories Call or visit your local retailer/dealer for genuine Canon video accessories. You can alsoobtain genuine accessories for your Canon camcorder by calling: 1-800-828-4040,Canon U.S.A. Information Center. Use of genuine Canon accessories is recommended....

158 TL-H34 Tele-converter This Tele-converter lens increases the focal length of the camcorder lens by a factor of 1.5.• The image stabilizer is not as effective when the Tele-converter is attached. • The minimum focusing distance with the TL-H34 is 8.2 ft. (2.5 m); 0.98 in. (2.5 cm) at maximum wide...

159 Additional Information E SC-1000/SC-2000 Soft Carrying Case A handy camcorder bag with padded compartments and plenty of space for accessories. SC-A50 Soft Carrying Case This lightweight bag keeps the camcorder within easy reach without weighing you down or getting in the way. VFL-1 Video Flash ...

160 Specifications OPTURA40/OPTURA30 System 2 rotary heads, helical scanning DV system (consumer digital VCR SD system), digital component recording PCM digital sound: 16 bit (48 kHz/2 ch); 12 bit (32 kHz/4 ch) EIA standard (525 lines, 60 fields) NTSC color signal 1/3.4-inch CCD, approx. 2,200,000 p...

161 Additional Information E Weight and dimensions are approximate. Errors and omissions excepted. Subject to change without notice. SDC-8M SD Memory Card 8 MB SD Memory Card standard 32 – 104 ˚F (0 – 40 ˚C) 1.3 × 0.94 × 0.08 in. (32 × 24 × 2.1 mm) 0.07 oz. (2 g) Capacity Interface Operating tempera...

162 Item Codes Provided Accessories Lens Cap D52-0260-000 CA-570 Compact Power Adapter 8468A002AA NB-2LH Battery Pack 9612A001AA STV-250N Stereo Video Cable 3067A002AA (D82-0590-201) SS-900 Shoulder Strap D81-1470-000 WL-D83 Wireless Controller D83-0682-000 IFC-300PCU USB Cable 6906A001AA Optional A...

163 Additional Information E Index 12bit audio . . . . . . . . . . . . . . . . . . 9116:9 widescreen . . . . . . . . . . . . . . 806-second auto date . . . . . . . . . . . . 73 Abroad, using the camcorder . . . 151Accessories. . . . . . . . . . . . . . . . 8, 157Advanced accesory shoe . . . . . . . ...

166 CANON CONSUMER DIGITAL VIDEO EQUIPMENT LIMITED WARRANTY The limited warranty set forth below is given by Canon Canada Inc. (“Canon Canada”) with respect to Canon digital videoequipment purchased in Canada. This limited warranty is only effective upon presentation of a bill of sale or other proof...