Tyco PC5016 - Manuals - manualsarea.com

Page 2 - Household Fire Safety Audit; System Information; Access Codes; Zone

2 15 To reset smoke detectors from an LCD Keypad: Press [ ✱ ] to enter the function list. Scroll to find: Press [ ✱ ] to select the output control. The display will read... Use the arrow (< >) keys to find the following message and press the [ ✱ ] key to select... NOTE: If you suspect that a f...

Page 3 - Door Chime Feature; Start with the panel in the disarmed mode, press [; Fire Alarm Operation; To reset smoke detectors from an LED Keypad:

3 14 15 ___________________________________________ _____________________________________ 16 ___________________________________________ _____________________________________ 17 ___________________________________________ _____________________________________ 18 _____________________________________...

Page 4 - Arming from an LED Keypad:; NOTE: If you arm the system with a zone; Setting the System Date and Time; Alarm Test; Functions” and press [; Full System Test; Inform the monitoring station that you are testing your system.

4 13 Access Codes Access Codes are used to arm and disarm the system. There are 33 access codes available: oneMaster Code and 32 access codes. Only the Master Code can be used to program additional security codes and to change other systemfeatures as well as to arm and disarm the security system. Th...

Page 5 - Viewing Trouble Conditions; ZONE LIGHT; Alternate Arming Methods; Audible Exit Fault

5 12 Viewing Trouble Conditions The control panel continuously monitors a number of possible trouble conditions. If one of these troubleconditions occur, the keypad will beep twice every 10 seconds until you press any key on the keypad. Troubles can only be viewed when the system is in the disarmed ...

Page 6 - Disarming the System; Disarming from an LED Keypad:; If an error is made; As soon as the correct code is; Disarming from an LCD Keypad:; Enter your access code.; key and enter the code again.; When a valid access code is entered, the keypad; Zone Bypassing; To bypass zones from an LED keypad:; Start with the system in the Ready state. Enter [; To bypass zones from an LCD keypad:

6 11 Disarming the System Disarming from an LED Keypad: Enter the premises through a designated Exit/Entry door; entering by any other door will sound animmediate alarm. As soon as the Exit/Entry door is opened, the keypad will beep to indicate that thesystem should be disarmed. Go to the keypad and...

Page 7 - Programming codes from an LCD Keypad:; ] key to indicate that you wish to program the Master Code. The; Access Code Attributes; If An Alarm Sounds; Fire Alarm; Function Keys; If these keys have been enabled by your; Programming Security Codes; Programming codes from an LED Keypad:; Up to 32 additional access codes (01 through 32) may be programmed.

7 10 Programming codes from an LCD Keypad: Master Code Press the [ ✱ ] key to enter the function list. Scroll (< >) to... Press [5] or [ ✱ ]. The display will read... Enter your current Master Code. The display will read... “01P” represents the first access code. Use the arrow (< >) keys...

Page 9 - Limited Warranty

Limited Warranty Digital Security Controls Ltd. warrants that for a period of twelve months from the date of purchase, theproduct shall be free of defect in materials and workmanship under normal use and that in fulfilment ofany breach of such warranty, Digital Security Controls Ltd. shall, at its o...

Page 10 - Instruction