Troy-Bilt 42000- Manuals

Page 4 - Section; Safety

Section 1 Safety SPARK ARRESTER WARNING TO RESIDENTS OF CALIFORNIA AND SEVERAL OTHER STATES Under California law, and under the laws of several other states, you are not permitted to operate an internal combustion engine using hydrocarbon fuels on any forest, brush, hay, grain, or grass coveredland;...

Page 8 - Assembly

Section 2 Assembly inspect unit Inspect the unit and carton for damage immediately after delivery. Contact the carrier (trucking company) if you find or suspect damage. Inform them of the damage and request instructions for filing a claim, to protect your rights, put your claim in writing and mail a...

Page 12 - Controls

Section 3 Controls This section defines the various controls on the unit. Refer to the following section, “Operation”, for an explanation of the proper use of these controls. A, Fig. 3-1—Auger drive control lever Control s the engagement of the auger drive. When this lever is down against the handle...

Page 15 - Operation

Section 4 Operation Pre-operation checklist 1. Review Section 1, “Safety” and Section 3. “Controls” in this manual. 2. Check the unit for any loose or missing hardware. Tighten or replace as needed. 3. Check Inside the auger housing and the discharge chute and remove any debris. 4. Check the engine ...

Page 22 - Maintenance

Section 5 Maintenance ^ DANGER BEFORE PERFORIVHNG ANY MAINTENANCE ON THE UNIT, STOP THE ENGINE AND WAIT FOR ALL MOVING PARTS TO STOP. DISCONNECT SPARK PLUG WIRE FROM SPARK PLUG. READ AND UNDERSTAND THIS ENTIRE MANUAL BEFORE PERFORMING ANY MAINTENANCE ON THE UNIT FAILURE TO FOLLOW THESE INSTRUCTIONS ...

Page 28 - Optional Kits and Specifications; Optional Kits; Specifications

Optional Kits and Specifications Optional Kits Kit Description Part/Model Number Drift Slicers Aids the removal of deep snow 1720887001 Electric Start Kit Allows starting with just a turn of a key 6848 Tire Chains Aids traction on icy surfaces 1756276 Service Kit Spark plug, belts, fuel stabilizer, ...

Page 29 - Troubleshooting

Troubleshooting TROUBLE PROBABLE CAUSE CORRECTION Engine will not start Ignition key into the “STOP" position Rotate ignition key into the “S” position Spark plug wire disconnected Connect spark plug wire to spark plug Fuel tank empty Fillfueltank Fouled spark plug Service or replace spark plug ...

Page 31 - Maintenance Schedule

Maintenance Schedule INTERVAL ITEM SERVICE Before Each Use Engine Check Engine Oil Level Loose or Missing Hardware Tighten or Replace Wheel Drive Control Lever Check Operation Auger Drive Control Lever Check Operation After Each Use Clean Unit As Required 25 hours Engine Oil Change Tire Pressure Che...

Page 32 - LIMITED WARRANTY

Products Covered LIMITED WARRANTY This warranty is for the following TROY-BILT® branded products and their attachments or accessories: chipper/shredders, chipper/vacs, walk-behind mowers, riding mowers, tractors, snowthrowers, brushcutters, sprayers, carts, composters and the Mini-Tiller. Date Warra...