TRENDNet Network Cable Tester - Manuals

ENGLISH Install the battery 1 RJ-11/RJ-45 Cable Test 1. Slide the cover off the TC-NT2 transmitter.2. Connect and insert the battery. 3. Slide the cover back on to the TC-NT2 transmitter. 1. Connect one end of an RJ-11 or RJ-45 cable to the remote port on the TC-NT2 transmitter. Connect the other en...

ENGLISH POWER / TONE OFF / ON TC-NT2 TRANSMITTER AUTO TEST 2 Remote Testing Note: Do NOT use the TC-NT2 for live wire testing. The TC-NT2 is for testing cables only. Do not connect the TC-NT2 to an Ethernet cable that is connected to a switch, router, computer, etc. Doing so will damage the device. ...

ENGLISH TC-NT2 REMOTE TERMINATOR POWER / TONE OFF / ON TC-NT2 TRANSMITTER AUTO TEST 4 Optional Accessory TC-NTUF (Sold Separately) IEEE 1394 (6-pin) / USB Cable1. Connect one TC-NTUF to the remote port on the TC-NT2 transmitter. Connect another TC-NTUF to the loopback port on the TC-NT2 remote termi...