Transcend USB JetFlash - Manuals

Transcend USB JetFlash – Manual in PDF format online.

Manuals:

Manual

Manual Transcend USB JetFlash

Summary

Page 2 - Table of Contents

Table of Contents Introduction Package Contents .................................................................................... 1 Features .................................................................................................... 1 System Requirements ....................................

Page 4 - Introduction; Package Contents; Quick Installation Guide; Features

1 Introduction Thank you very much for purchasing Transcend’s JetFlash™ . This small device is more than a USB Flash Drive. It combines a USB Flash Drive with MP3, AB repeat, and voice recording functions. With a USB connector, it can expedite exchanging huge amounts of data between any desktop or l...

Page 6 - Driver Installation; Driver Installation for Windows 98SE; Next

3 Driver Installation Driver Installation for Windows 98SE 1. Put the Driver CD into the CD-ROM (Auto-Run supported). Click Win98 Driver button. 2. Click Next to continue. 3. The Install Shield Wizard guides you through the installation process.

Page 8 - Driver Installation for Linux Kernel 2.4 or Later; Data Storage; JetFlash

5 Driver Installation for Linux Kernel 2.4 or Later No driver is required. Just plug JetFlash into the USB port and mount it. Example: 1. Create directory of /mnt/JetFlash first: mkdir /mnt/JetFlash 2. mount JetFlash : mount –a –t msdos /dev/sda1 /mnt/JetFlash Data Storage After installing the drive...

Page 9 - Uninstall; Driver; How to Unplug JetFlash Safely

6 Uninstall 1. Put the Driver CD into the CD-ROM (Auto-Run supported). Click Win98 Driver button. 2. Click OK to continue. How to Unplug JetFlash Safely Before removing JetFlash , please make sure the LED is not flashing! If you remove JetFlash while the LED is flashing, unpredictable damage to the ...

Page 11 - Enter MP3 Mode; Enter Record Mode

8 Product Overview REC Button PLAY/PAUSE Button Record LED Power/Play LED Repeat LED USB Connector Cover HOLD Switch Microphone Earphone Jack Track Control Wheel Volume Control Wheel Basic Operation Enter MP3 Mode 1. Disconnect JetFlash from your computer. 2. Press and hold the PLAY/PAUSE button for...

Page 13 - MP3 Function; To Download or

10 Repeat All Tracks Press the Track Control Wheel when the Repeat LED is on, or press the Track Control Wheel twice when the Repeat LED is off. The Repeat LED blinks orange. To resume normal playback, press the Track Control Wheel again. Repeat a Portion of One Track (AB Repeat) 1. Press the Volu...

Page 14 - To Play MP3 Music; AB Repeat Function; To Record Voice

11 To Play MP3 Music 1. Make sure you have downloaded MP3 or WMA files to the root directory of your JetFlash . 2. Disconnect JetFlash from your computer. 3. Connect the earphone with the earphone jack . 4. Set HOLD switch to “ OFF ” position. 5. Press and hold the PLAY/PAUSE button for a few second...

Page 15 - To Play the Recorded Files

12 4. Press and hold the REC button for a few seconds to enter Record mode. The Record LED turns red. 5. Press the REC button. The Record LED blinks red and voice recording starts. 6. Press the REC button to stop voice recording when you wish to stop. 7. Press the REC button to start voice recording...

Page 16 - LED Indication; Recover JetFlash; To Recover JetFlash in Windows 98SE

13 LED Indication Record LED (Red) Power/Play LED (Green) Repeat LED (Orange) Status off off off Power off off fast blink off Data transfer off on off Power on (in MP3 mode) off normal blink off Play MP3 music off normal blink on Repeat a track off normal blink normal blink Repeat all tracks off nor...

Page 19 - remains unchecked. Click; Start; message appears. Click; Close; to complete the; Recovery; has been returned to its initial

16 remains unchecked. Click Start to initiate the low-level format. 10. Complete message appears. Click Close to complete the Recovery procedures. 11. Release the PLAY/PAUSE button. JetFlash has been returned to its initial status for your usage.

Page 20 - To Recover JetFlash in Windows Me, 2000, and XP

17 To Recover JetFlash in Windows Me, 2000, and XP Skip steps 1-3 if the Utility program has already been installed. 1. Put the Driver CD into the CD-ROM (Auto-Run supported) and click the Utility button on the JetFlash splash screen. 2. SigmaTel MSCN Audio Player Setup window appears. Click Next ...

Page 25 - Complete; message box appears. Click

22 16. Complete message box appears. Click Close to complete the Recovery procedures. 17. Release the PLAY/PAUSE button. JetFlash has been returned to its initial status for your usage.

Page 26 - Troubleshooting

23 Troubleshooting Q1: Why doesn’t the driver CD Auto-Run after it is inserted into the CD-ROM drive in Windows? A1: This problem usually occurs because the Auto-Insert function of the CD-ROM drive is disabled. Please enter Device Manager in Control Panel and enable the Auto-Insert function of the C...

Page 29 - Specifications; Data retention: Up to 10 years; Ordering Information; Memory Size Transcend

26 Specifications • Size: 97 mm × 31 mm × 18 mm • Weight: 25 g (without battery) • Data retention: Up to 10 years • Shock resistance: 1000 G (maximum) • Erase cycles: 1,000,000 times • Signal-to-Noise Ratio: 90dB • Output frequency: 20Hz–20KHz • Estimated battery life: 12 hours (alkaline battery) • ...

Page 30 - JetFlash Limited Warranty

JetFlash Limited Warranty “Above and beyond” is the standard we set ourselves for customer service at Transcend. We consistently position ourselves to be significantly above the industry norm. It’s all part of our commitment to Customer Satisfaction. All Transcend Information, Inc. (Transcend) produ...