Trane XL950 - Manuals

7 Set Point Panel 3 3) Air Cleaner Mode Automatic means the air cleaner will run when the fan runs. Quick Clean is a full power air cleaning cycle that increases the system fan speed setting (when not actively heating or cooling) to 100% for three hours to achieve maximum clean air delivery rate. Al...

8 Manually Set up a Schedule 4 1) Turn Scheduling On (and select Manual Scheduling) 2) Enter the Schedule Menu 3) Select a day or time period By default the schedule shows the periods Wake, Away, Home and Sleep. Each day can have its own schedule and each schedule will be a unique color. DefaultSche...

10 Using Photos 5 Notch at top Using an SD Card Insert the SD Card at the bottom right hand side of the thermostat, taking care to keep the card’s “notch” in the orientation shown. NOTE: The card must remain inserted to view the photos and the SD card must remain “unlocked.” You can set up a photo a...

11 3) Browse the album us- ing the arrows on the right and left edges of the screen. Touch the image to see full size images. Check the “Add to Slide-show” box to include the a photo in a slideshow. 1) If you do not yet have your SD card inserted or it is not inserted all the way, you will see this ...

12 1) If you desire, turn “On” the screen saver. Set the wait time until the screen saver starts. 2) The “Default Screen Saver” shows the cur- rent temperature as a floating icon over a darkened black screen. Select “Image Screen Saver” if you have inserted an SD card and added photos to a slideshow...

13 Other Commonly Used Features 6 The following pages highlight some of the more common processes you will use. Events and Vacations Set up how your system will operate for special events or when you are away from home for extended periods. Name Your System Give your system a name. This is very impo...

15 Customize your Home Screen Add shortcuts and customize the dashboard. Wireless Network Setup Set up a connection to your wireless network to enable weather and software update features. See the following section for setup details (802.11 B/G wireless router and internet required). Humidity You ma...

16 Optional Wireless Networking 7 Enabling wireless networking brings addi-tional functionality to your thermostat. NOTE: On a normally configured network, familiarity with a personal wireless network is helpful but not necessarily required for installation. If your personal wireless network is a se...

17 2) Enable the wire- less radio by pressing “Wire-less ON/OFF”. 3) After the wire- less radio is enabled, press the “Connect to a Network” button to choose from a list of available wireless net-works. Enabling Wireless Networking 7.1 1) Enter the Wireless Network Setup Menu. NOTE : If the router i...

18 The signal strength is indicated in bars. The more bars, the better the signal strength. A minimum of three bars is required for stable network operation. The network will op-erate with one or two bars, but may result in intermittent or lost connections. NOTE : Signal strength may be affected by ...

19 1A) If the network is unsecured (with an “open” padlock), the following mes-sage will be dis-played. 2) Enter the network key (case-sensitive password). You or your network administrator will need to provide the required informa-tion. 1B) If the network is secured (with a “closed” padlock), the f...

20 Advanced networking will be required in the following two instances: 1. When connecting to a non-broadcast network2. When configuring a static IP address Advanced Networking Information 7.4 Enter the Advanced Network Setup Menu. IMPORTANT : The Advanced Network screens are intended for individual...

21 6) Enter the Network Key using the on-screen keypad. 5) Press “Enter Network Key” button. 2) Press the “Enter SSID Name” button. 1) The “Network Security” button in this Ad- vanced Network Settings menu will be highlighted by default. 4) Select a network security type. 3) Enter the SSID Name usin...

22 Host Settings 7.6 This screen is used to control how the thermostat obtains network addresses and is needed when DHCP (Dynamic Host Configuration Protocol) has been turned off or is not available on the router. Otherwise, you may use DHCP to automatically obtain this information. This manual conf...

23 Once a network has been joined, the thermostat will reconnect to it after signal or power interruptions. When connected, a green dot will be shown. To disconnect from this network, enter the “Connect to a Network” menu and select “Disconnect”. NOTE: When joining a different network, the current r...

24 Multi-System Environments 7.9 1) In a multi-system environment each thermostat can see and control the others. NOTE: The thermostats must have wireless enabled and be connected to the same personal wireless network. 2) Each thermostat belongs to an Access Control Group—set to “Group A” by default...

26 Wireless Registration 8 1A) In the Network Setup Screen, select the “Register Now” button to begin registration. Proceed to Step 2. 1B) If instead you try to connect to Weather before you have reg-istered, you will be prompted to register. 2) Read and accept the License Agreement to proceed with ...

29 Troubleshooting 10 Slow response or unexpected operation: Reboot your thermostat at the following location. “No System Found” displays on the screen: If this message stays on your screen, press the “Reboot” button shown at right. No response to any button presses: Remove and re-install the thermo...

30 Index of Functionality 1-Touch Presets .................................. 14Air Cleaner Mode .................................. 7Alerts .................................................. 29Customize Home Screen .................... 15Dealer Information .............................. 13Events .......