Trane TCONT803AS32DA - Manuals

Page 2 - Installing Wallplate; CAUTION; IMPORTANT

TCONT802AS32DA TOUCH SCREEN AND TCONT803AS32DA TOUCH SCREEN WITH DEHUMIDIFICATION Pub. No. 18-HD25D19-369-1790—3 2 Do not install the comfort control where it can be affected by:— Drafts or dead spots behind doors and in corners.— Hot or cold air from ducts.— Radiant heat from sun or appliances.— Co...

Page 8 - Powering the Comfort Control; The Comfort Control can be powered with 24 Vac.

TCONT802AS32DA TOUCH SCREEN AND TCONT803AS32DA TOUCH SCREEN WITH DEHUMIDIFICATION Pub. No. 18-HD25D19-369-1790—3 8 Fig. 15. Typical hookup of multistage two-step scroll heat pump with two stage variable speed gas furnace (3H/2C heat pump). Powering the Comfort Control The Comfort Control can be powe...

Page 9 - Setting Calendar and Time; Locate and remove the tab labeled; Fig. 19. Setting calendar and time after initial; Using the Comfort Control

TCONT802AS32DA TOUCH SCREEN AND TCONT803AS32DA TOUCH SCREEN WITH DEHUMIDIFICATION Pub. No. 18-HD25D19-3 9 69-1790—3 Mounting the Comfort Control 1. Align the terminal screw blocks with the pins on the back of the comfort control. 2. Push the comfort control straight onto the wallplate. See Fig. 17. ...

Page 10 - OPERATION; System and Fan Settings; SYSTEM SETTINGS; Preprogrammed Settings

TCONT802AS32DA TOUCH SCREEN AND TCONT803AS32DA TOUCH SCREEN WITH DEHUMIDIFICATION Pub. No. 18-HD25D19-369-1790—3 10 OPERATION System and Fan Settings The System default setting is Heat and the Fan default setting is Auto. SYSTEM SETTINGS Heat: controls heating system.Off: heating and cooling are off...

Page 11 - INSTALLER SETUP; Follow these steps to enter the Installer Setup:

TCONT802AS32DA TOUCH SCREEN AND TCONT803AS32DA TOUCH SCREEN WITH DEHUMIDIFICATION Pub. No. 18-HD25D19-3 11 69-1790—3 INSTALLER SETUP The comfort control works with many different system types. To operate correctly, the comfort control must be set up to operate the installed heating and/or cooling sy...

Page 17 - SYSTEM CHECKOUT; Installer System Test

TCONT802AS32DA TOUCH SCREEN AND TCONT803AS32DA TOUCH SCREEN WITH DEHUMIDIFICATION Pub. No. 18-HD25D19-3 17 69-1790—3 SYSTEM CHECKOUT Installer System Test The Installer System Test mode is used to test the HVAC system(s). See Table 5. While in System Test mode, minimum off-time for compressors is by...

Page 18 - ADVANCED FEATURES; Outdoor or Indoor Temperature Sensor; OPERATION IN EMERGENCY HEAT MODE; Dehumidification Droop Control

TCONT802AS32DA TOUCH SCREEN AND TCONT803AS32DA TOUCH SCREEN WITH DEHUMIDIFICATION Pub. No. 18-HD25D19-369-1790—3 18 ADVANCED FEATURES Outdoor or Indoor Temperature Sensor For accuracy, the initial reading of the indoor and outdoor temperature sensors require five minutes to stabilize. See the Sensor...

Page 19 - Display does not come on.

TCONT802AS32DA TOUCH SCREEN AND TCONT803AS32DA TOUCH SCREEN WITH DEHUMIDIFICATION Pub. No. 18-HD25D19-3 19 69-1790—3 TROUBLESHOOTING (SEE TABLE 6) Table 6. Troubleshooting. Symptom Possible Cause Action Display does not come on. Comfort control is not being powered. Check for 24 Vac between B and Rc...