Trane TCONT602AF22MA - Manuals

In Recovery Auxillary Heat On 5 Quick reference to display screen Current inside temperature Low battery warning (see page 17) Current time/day (see page 6) Current program periodWake/Leave/Return/Sleep(see pages 9-11) In Recovery(see page 16) Temperature setting(see pages 11-13) System status Heat ...

Wed Done Set Schedule Set Day 6 Set the time and day 1 Press the SET CLOCK / DAY / SCHEDULE button, then press or to set the clock time. 2 Press the SET DAY button, then press or to select the day of the week. 3 Press DONE to save & exit. Note: If the SET CLOCK / DAY / SCHEDULE option is not dis...

Heat Heat On 7 Select the fan setting Press the FAN button to select Auto or On. In “Auto” mode (the most commonly usedsetting), the fan runs only when the heating or cooling system is on. If set to“On,” the fan runs continuously. Use this setting for improved air circulation, or formore efficient a...

8 Select the system setting Note: The Auto and Em Heatsystem settings may not appear,depending on how your Comfort Control was installed. Press the SYSTEM button to select: • Heat: Controls only the heating system. • Cool: Controls only the cooling system. • Off: Heating and cooling systems are off....

LEAVE 8:00 am WAKE 8:00 am RETURN 6:00 pm SLEEP 10:00 pm 9 Set to the time you awaken and the temperature you wantduring the morning, until you leave for the day. Set to the time you leave home and the temperature youwant while you are away (usually an energy-saving level). Set to the time you retur...

10 This Comfort Control is pre-set to use Energy Star ® program settings. We recom- mend these settings, since they can reduce your heating/cooling expenses by asmuch as 33%. (See next page to adjust times and temperatures of each time period.) Heat (Mon-Fri) Cool (Mon-Fri) Heat (Sat-Sun) Cool (Sat-...

Done Next Heat CancelPeriod AM Wed Thu Fri Tue Mon Leave Set Schedule 11 To adjust program schedules 1 Press SET CLOCK / DAY / SCHEDULE , then SET SCHEDULE . 2 Press or to set your weekday Wake time (Mon-Fri), then press NEXT . 3 Press or to set the temperature for this time period, then press NEXT ...

13 Program schedule override (permanent) Press HOLD to permanently adjust the temperature. This will override the temperature settings for all time periods. The “Hold” feature turns off the programschedule and allows you to adjust the Comfort Control manually, as needed. Whatever temperature you set...

Set Clock/Day/ Schedule 15 Built-in compressor protection This feature helps prevent damage to thecompressor in your air conditioning or heat pump system. Damage can occur if the compressor is re-started too soon after shutdown. This feature forces the compressor to wait for a few minutes before res...

16 Adaptive Intelligent Recovery eliminates guesswork when setting your schedule. Itallows the Comfort Control to “learn” how long your furnace and air conditionertake to reach the temperature you want. Just set your program schedule to the time you want the house to reach yourdesired temperature.Th...

17 Battery replacement Batteries are optional (to provide backuppower) because your Comfort Control waswired to run on AC power when installed. Install fresh batteries immediately when the REPLACE BATTERY warning begins f lashing.The warning f lashes about two months before the batteries are deplete...

18 In case of difficulty If you have difficulty with your Comfort Control, please try the suggestions below.Most problems can be corrected quickly and easily. Display is blank • Check circuit breaker and reset if necessary. • Make sure power switch at heating & cooling system is on. • Make sure ...

20 Customer assistance xxxxxxx xxxxxxx Model number Date code For assistance with this product, call yourHVAC Contractor or visit www.trane.com.Or call the Customer Assistance Helplinetoll-free at 1-800-500-2041. To save time, please remove the batteryholder and note your model number anddate code b...

22 THE LIMITED WARRANTY AND LIABILITY SET FORTH HEREIN ARE IN LIEU OFALL OTHER WARRANTIES AND LIABILITIES, WHETHER IN CONTRACT OR INNEGLIGENCE, EXPRESS OR IMPLIED, IN LAW OR IN FACT, INCLUDING IMPLIEDWARRANTIES OF MERCHANTABILITY AND FITNESS FOR PARTICULAR USE,AND IN NO EVENT SHALL WARRANTOR BE LIAB...