Trane CNTPRC002 - Manuals

8 CNT-PRC002-EN Figure 5 shows the dimensions of the frame-mounted Tracer MP581 controller. Figure 6 on page 9 shows the dimensions of the Tracer MP581 NEMA-1 enclosure. Figure 5: Frame-mounted Tracer MP581 dimensions Dimensions

10 CNT-PRC002-EN Tracer MP580/581 controllers can operate as stand-alone controllers, on a peer-to-peer network, or as part of a Tracer Summit building automation system (see Figure 7). With an operator display, you can monitor information and make control changes on a peer-to-peer network. Figure 7...

CNT-PRC002-EN 11 Figure 8 shows typical input and output connections to the termination board. For details on inputs and outputs, see “Inputs and outputs” on page 4. Figure 8: Wiring diagram 0–20 mA sensor Temperature sensor <300 ft(100m) <1000 ft(300 m) 0–10 Vdc outputLoad > 500 Ω Powered ...

12 CNT-PRC002-EN Figure 9 shows the interior of the Tracer MP581 NEMA-1 enclosure. Figure 9: Tracer MP581 enclosure interior Line-to-low voltage power transformer Main circuit board Termination board Mounting location for optional static pressure sensor Enclosure interior

CNT-PRC002-EN 13 Power requirements Nominal rating: 24/120/230 Vac; 50/60 Hz; 1 phase Voltage utilization range 24 Vac (frame-mounted): 19–30 Vac120 Vac nominal: 98–132 Vac230 Vac nominal: 184–254 Vac Operating environment Temperature Without display: From –40°F to 158°F (–40°C to 70°C)With display:...