Trane CNT-PRC002-EN - Manuals

Page 2 - Overview

2 CNT-PRC002-EN The Tracer MP580 programmable controller is available factory-installed on the following Trane air handlers: • M-Series Climate Changer air handlers• T-Series Climate Changer air handlers• AireSystems custom air handlers The Tracer MP581 programmable controller is available for field...

Page 3 - Contents

CNT-PRC002-EN 3 Contents Overview . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Applications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2Product models . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2Inputs and outputs . . . . . . . . . . . . . . . . . . . . ....

Page 4 - Operator display models; Expansion module

4 CNT-PRC002-EN Tracer MP580/581 models Several models of Tracer MP580/581 controllers are available. Tracer MP581 models are illustrated in Figure 1. Tracer MP580 on Trane air handlers The Tracer MP580 controller is available packaged with the following air handlers: • M-Series Climate Changer air ...

Page 6 - Engineered smoke control; Features

6 CNT-PRC002-EN Graphical programming The Tracer graphical programming (TGP) editor, shown in Figure 5 on page 7, eliminates the need for line-by-line programming. The TGP editor is a software component of the Trane Rover service tool. TGP has the following advantages: • Easy to learn—programming is...

Page 8 - Network architecture

8 CNT-PRC002-EN Tracer MP580/581 controllers can operate as stand-alone controllers, on a peer-to-peer network, or as part of a Tracer Summit building automation system (see Figure 7). With an operator display, you can monitor information and make control changes on a peer-to-peer network. Figure 7....

Page 9 - Wiring diagrams

CNT-PRC002-EN 9 Figure 8 shows typical input and output connections to the Tracer MP581 termination board. The Tracer MP581 termination board uses screw terminals. The Tracer MP580 termination board uses 0.25-inch quick-connect terminals. Figure 9 on page 10 shows typical input and output connection...

Page 11 - Enclosure interior

CNT-PRC002-EN 11 Figure 10 shows the interior of the Tracer MP581 NEMA-1 enclosure. Significant space is available for wiring inputs and outputs. Wires should be routed after the optional pressure sensor is installed. Tracer MP580 enclosure configurations are customized in the factory to meet custom...

Page 12 - Dimensions

12 CNT-PRC002-EN Figure 11 shows the dimensions of the Tracer MP581 NEMA-1 enclosure. Figure 12 shows the dimensions of the frame-mounted Tracer MP581 controller. The dimensions of the operator display models are listed in “Specifications” on page 14. Figure 11. Tracer MP581 enclosure dimensions Fig...

Page 14 - Specifications

14 CNT-PRC002-EN Tracer MP580/581 The specifications in this section apply to all Tracer MP580/581 models. Inputs and outputs Twelve universal inputs Dry contact binary (including pulse accumulation), 0–20 mA, 0–10 Vdc, linear resistance, or thermistor. The first four inputs can be used directly wit...