TP-Link WiFi Pocket Router/AP/TV Adapter/repeater - Manuals

Page 2 - COPYRIGHT & TRADEMARKS; Specifications are subject to change without notice.

COPYRIGHT & TRADEMARKS Specifications are subject to change without notice. is a registered trademark of TP-LINK TECHNOLOGIES CO., LTD. Other brands and product names are trademarks or registered trademarks of their respective holders. No part of the specifications may be reproduced in any form ...

Page 3 - FCC STATEMENT; Reorient or relocate the receiving antenna.; FCC RF Radiation Exposure Statement:

FCC STATEMENT This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses a...

Page 4 - 당해; NCC Notice & BSMI Notice; 注意!; 依據低功率電波輻射性電機管理辦法

conjunction with any other antenna or transmitter.” CE Mark Warning This is a class B product. In a domestic environment, this product may cause radio interference, in which case the user may be required to take adequate measures. Canadian Compliance Statement This device complies with Industry Cana...

Page 5 - 安全諮詢及注意事項; Safety Information; Avoid water and wet locations.

率、加大功率或變更原設計之特性或功能。第十四條低功率射頻電機之使用不得影響飛航安全及干擾合法通行；經發現有干擾現象時，應立即停用，並改善至無干擾時方得繼續使用。前項合法通信，指依電信規定作業之無線電信。低功率射頻電機需忍受合法通信或工業、科學以及醫療用電波輻射性電機設備之干擾。減少電磁波影響，請妥適使用。安全諮詢及注意事項 ●請使用原裝電源供應器或只能按照本產品注明的電源類型使用本產品。 ●清潔本產品之前請先拔掉電源線。請勿使用液體、噴霧清潔劑或濕布進行清潔。 ●注意防潮，請勿將水或其他液體潑灑到本產品上。  ●插槽與開口供通風使用，以確保本產品的操作可靠並防止過熱，請勿堵塞或覆...

Page 7 - DECLARATION OF CONFORMITY; For the following equipment:; The product carries the CE Mark:; Person responsible for making this declaration:; Yang Hongliang

TP-LINK TECHNOLOGIES CO., LTD TP-LINK TECHNOLOGIES CO., LTD. Building 24 (floors 1, 3, 4, 5), and 28 (floors 1-4) Central Science and Technology Park, Shennan Rd, Nanshan, Shenzhen, China DECLARATION OF CONFORMITY For the following equipment: Product Description: WiFi Pocket Router/AP/TV Adapter/Rep...

Page 8 - CONTENTS

- I - CONTENTS Package Contents..................................................................................................................................1 Chapter 1. Introduction ....................................................................................................................

Page 16 - Package Contents; The following items should be found in your package:; The provided power plug may differ from the picture due

TL-WR710N WiFi Pocket Router/AP/TV Adapter/Repeater - 1 - Package Contents The following items should be found in your package: ¾ One TL-WR710N WiFi Pocket Router/AP/TV Adapter/Repeater ¾ Quick Installation Guide ¾ One RJ-45 Ethernet Cable ¾ One Resource CD for TL-WR710N WiFi Pocket Router/AP/TV Ada...

Page 17 - Chapter 1. Introduction; Overview of the Router; or anyone else for work or play.; Flexible Access Control

TL-WR710N WiFi Pocket Router/AP/TV Adapter/Repeater - 2 - Chapter 1. Introduction 1.1 Overview of the Router Small enough to fit in the average pocket, the TL-WR710N WiFi Pocket Router/AP/TV Adapter/Repeater is uniquely suited to provide robust wireless networking to travelers, students, or anyone e...

Page 20 - Chapter 2. Connecting the Router; System Requirements; Installation Environment Requirements; WISP

TL-WR710N WiFi Pocket Router/AP/TV Adapter/Repeater - 5 - Chapter 2. Connecting the Router 2.1 System Requirements ¾ Each PC in the LAN needs a working Ethernet Adapter ¾ TCP/IP protocol must be installed on each PC ¾ Web browser, such as Microsoft Internet Explorer 5.0 or later, Mozilla Firefox, Ap...

Page 24 - Chapter 3. Quick Installation Guide; Quick Setup; your PC as the following steps:; Obtain an IP address automatically; you need instructions as to how to do this, please refer to; Connect

TL-WR710N WiFi Pocket Router/AP/TV Adapter/Repeater - 9 - Chapter 3. Quick Installation Guide This chapter will show you how to configure the basic functions of your TL-WR710N WiFi Pocket Router/AP/TV Adapter/Repeater using Quick Setup Wizard within minutes. 3.1 TCP/IP Configuration The default IP a...

Page 25 - default; SSID; and; of your Router are on the label. Both are case-sensitive.; Network key; is the; Password

TL-WR710N WiFi Pocket Router/AP/TV Adapter/Repeater - 10 - 2) Enter the Security key . Click OK . 3) If you can see Connected after the default SSID, you’ve successfully connected to the wireless network. ) Note: 1. The default SSID and Password of your Router are on the label. Both are case-sensiti...

Page 26 - Figure 3-1 Success result of Ping command; and the Router has failed.; Figure 3-2 Failure result of Ping command; Please check the connection following these steps:; Is the connection between your PC and the Router correct?

TL-WR710N WiFi Pocket Router/AP/TV Adapter/Repeater - 11 - Figure 3-1 Success result of Ping command ¾ If the result displayed is similar to the Figure 3-2, it means the connection between your PC and the Router has failed. Figure 3-2 Failure result of Ping command Please check the connection follow...

Page 27 - Quick Installation Guide; admin; Figure 3-3 Login Windows; the Using Proxy checkbox, and click; OK; Figure 3-4 Quick Setup

TL-WR710N WiFi Pocket Router/AP/TV Adapter/Repeater - 12 - 3.2 Quick Installation Guide With a Web-based utility, it is easy to configure and manage the TL-WR710N WiFi Pocket Router/AP/TV Adapter/Repeater. The Web-based utility can be used on any Windows, Macintosh or UNIX OS with a Web browser, suc...

Page 28 - When you choose; Wireless; on; Working Mode; , take the following

TL-WR710N WiFi Pocket Router/AP/TV Adapter/Repeater - 13 - 3. Click Next , and then Working Mode page will appear, shown in Figure 3-5. Figure 3-5 Quick Setup - Working Mode ) Note: The Router supports five working modes for multi-user to access the Internet: Wireless Router , Access Point , Repeate...

Page 29 - Figure 3-6 Quick Setup - WAN Connection Type; function is not suitable for; Static IP; detected by the Router.

TL-WR710N WiFi Pocket Router/AP/TV Adapter/Repeater - 14 - 1. Click Next in Figure 3-5 , and then WAN Connection Type page will appear as shown in Figure 3-6 . Figure 3-6 Quick Setup - WAN Connection Type The Router provides Auto-Detect function and supports five popular ways Dynamic IP , Static IP ...

Page 33 - Figure 3-13 Quick Setup - More Advanced Wireless Settings

TL-WR710N WiFi Pocket Router/AP/TV Adapter/Repeater - 18 - country or region is not listed, please contact your local government agency for assistance. ¾ Disable Security - The wireless security function can be enabled or disabled. If disabled, the wireless stations will be able to connect the Route...

Page 34 - Figure 3-14 Quick Setup – Finish; TEST

TL-WR710N WiFi Pocket Router/AP/TV Adapter/Repeater - 19 - 4. The Finish page is shown as Figure 3-14. Click the Reboot button to make your wireless configuration take effect and finish the Quick Setup . Figure 3-14 Quick Setup – Finish 3.2.2 Access Point Mode When you choose Access Point on Working...

Page 35 - If; 1bg mixed mode; is selected in the; Mode; selecting field will turn

TL-WR710N WiFi Pocket Router/AP/TV Adapter/Repeater - 20 - function of the Router in a region other than one of those specified in this field. If your country or region is not listed, please contact your local government agency for assistance. ¾ Channel - This field determines which operating freque...

Page 36 - Figure 3-17 Quick Setup – Finish

TL-WR710N WiFi Pocket Router/AP/TV Adapter/Repeater - 21 - Figure 3-17 Quick Setup – Finish 3.2.3 Repeater Mode When you choose Repeater Mode on Working Mode page in Figure 3-5 , take the following steps: 1. Click Next , and then Wireless Repeater page will appear as shown in Figure 3-18. Figure 3-1...

Page 40 - Figure 3-24 Quick Setup – WAN Connection Type

TL-WR710N WiFi Pocket Router/AP/TV Adapter/Repeater - 25 - 3.2.5 WISP Client Router Mode When you choose WISP Client Router on Working Mode page in Figure 3-5 , take the following steps: 1. Click Next , and then WAN Connection Type page will appear as shown in Figure 3-24. Figure 3-24 Quick Setup – ...

Page 43 - Finish; page is shown as Figure 3-29. Click the; Reboot; button to make your wireless; Figure 3-29 Quick Setup – Finish; In an elevated location such as a high shelf.

TL-WR710N WiFi Pocket Router/AP/TV Adapter/Repeater - 28 - 4. The Finish page is shown as Figure 3-29. Click the Reboot button to make your wireless configuration take effect and finish the Quick Setup . Figure 3-29 Quick Setup – Finish ) Note: The operating distance or range of your wireless connec...

Page 44 - Chapter 4. Configuration for Wireless Router Mode

TL-WR710N WiFi Pocket Router/AP/TV Adapter/Repeater - 29 - Chapter 4. Configuration for Wireless Router Mode This chapter will show each Web page's key functions and the configuration way for Wireless Router Mode of TL-WR710N. 4.1 Login After your successful login, you can configure and manage the d...

Page 45 - LAN; them in the

TL-WR710N WiFi Pocket Router/AP/TV Adapter/Repeater - 30 - Figure 4-2 ¾ Firmware Version - The version information of the Router’s firmware. ¾ Hardware Version - The version information of the Router’s hardware. ¾ LAN - This field displays the current settings or information for the LAN, you can con...

Page 48 - the new device for WPS function meanwhile.

TL-WR710N WiFi Pocket Router/AP/TV Adapter/Repeater - 33 - ) Note: To build a successful connection by WPS, you should also do the corresponding configuration of the new device for WPS function meanwhile. For the configuration of the new device, here takes the Wireless Adapter of our company for exa...

Page 50 - Figure 4-5 Add A New Device; Enter the PIN from my AP; Enter the PIN of my; in the; Access Point PIN; The WPS Configuration Screen of Wireless Adapter

TL-WR710N WiFi Pocket Router/AP/TV Adapter/Repeater - 35 - Figure 4-5 Add A New Device Method Three: Enter the PIN from my AP Step 1: Get the Current PIN code of the AP in Figure 4-3 (each AP has its unique PIN code. Here takes the PIN code 12345670 of this AP for example). Step 2: For the configura...

Page 51 - added to the network.; Wireless Router; Figure 4-7 Wireless Working Mode Settings

TL-WR710N WiFi Pocket Router/AP/TV Adapter/Repeater - 36 - Figure 4-6 ) Note: 1) The WPS LED on the AP will light green for five minutes if the device has been successfully added to the network. 2) The WPS function cannot be configured if the Wireless function of the AP is disabled. Please make sure...

Page 52 - Figure 4-8 the Network menu

TL-WR710N WiFi Pocket Router/AP/TV Adapter/Repeater - 37 - 4.6 Network Figure 4-8 the Network menu There are three submenus under the Network menu (shown in Figure 4-8): WAN , MAC Clone and LAN. Click any of them, and you will be able to configure the corresponding function. 4.6.1 WAN Choose menu “ ...

Page 55 - Only when you have configured the system time on “; System Tools; function can take effect.

TL-WR710N WiFi Pocket Router/AP/TV Adapter/Repeater - 40 - • Dynamic IP - You can check this radio button to use Dynamic IP as the secondary connection to connect to the local area network provided by ISP. • Static IP - You can check this radio button to use Static IP as the secondary connection to ...

Page 56 - Figure 4-12 PPPoE Advanced Settings

TL-WR710N WiFi Pocket Router/AP/TV Adapter/Repeater - 41 - Figure 4-12 PPPoE Advanced Settings ¾ MTU Size - The default MTU size is “1480” bytes, which is usually fine. It is not recommended that you change the default MTU Size unless required by your ISP. ¾ Service Name/AC Name - The service name a...

Page 61 - Figure 4-16 MAC Address Clone

TL-WR710N WiFi Pocket Router/AP/TV Adapter/Repeater - 46 - Idle Time field. Otherwise, enter the number of minutes you want to have elapsed before your Internet connection terminates. ¾ Connect Automatically - Connect automatically after the Router is disconnected. To use this option, check the radi...

Page 62 - Save; Only the PC on your LAN can use the; MAC Address Clone; Address pool in the DHCP server will be configured automatically

TL-WR710N WiFi Pocket Router/AP/TV Adapter/Repeater - 47 - Click the Save button to save your settings. ) Note: 1. Only the PC on your LAN can use the MAC Address Clone function. 2. If you change WAN MAC Address when the WAN connection is PPPoE, it will not take effect until the connection is re-est...

Page 63 - Figure 4-18 Wireless menu

TL-WR710N WiFi Pocket Router/AP/TV Adapter/Repeater - 48 - 4.7 Wireless Figure 4-18 Wireless menu There are five submenus under the Wireless menu (shown in Figure 4-18): Wireless Settings , Wireless Security, Wireless MAC Filtering, Wireless Advanced and Wireless Statistics . Click any of them, and ...

Page 64 - Auto

TL-WR710N WiFi Pocket Router/AP/TV Adapter/Repeater - 49 - the Router in a region other than one of those specified in this field. If your country or region is not listed, please contact your local government agency for assistance. ¾ Mode - Select the desired mode. The default setting is 11bgn mixed...

Page 65 - Figure 4-20 Wireless Security; Version

TL-WR710N WiFi Pocket Router/AP/TV Adapter/Repeater - 50 - 4.7.2 Wireless Security Choose menu “ Wireless → Wireless Security ”, and then you can configure the security settings of your wireless network. There are three wireless security modes supported by the Router: WPA/WPA2-Personal, WPA/WPA2-Ent...

Page 67 - Figure 4-22 Wireless MAC Filtering

TL-WR710N WiFi Pocket Router/AP/TV Adapter/Repeater - 52 - • Key Type - You can select the WEP key length (64-bit, or 128-bit, or 152-bit.) for encryption. "Disabled" means this WEP key entry is invalid. 64-bit - You can enter 10 hexadecimal digits (any combination of 0-9, a-f, A-F, zero key...

Page 68 - Figure 4-23 Add or Modify Wireless MAC Address Filtering entry

TL-WR710N WiFi Pocket Router/AP/TV Adapter/Repeater - 53 - Figure 4-23 Add or Modify Wireless MAC Address Filtering entry To add or modify a MAC Address Filtering entry, follow these instructions: 1. Enter the appropriate MAC Address into the MAC Address field. The format of the MAC Address is XX-XX...

Page 70 - Figure 4-26 Wireless Statistics

TL-WR710N WiFi Pocket Router/AP/TV Adapter/Repeater - 55 - particular receiving station and negotiate the sending of a data frame. The default value is 2346. ¾ Fragmentation Threshold - This value is the maximum size determining whether packets will be fragmented. Setting the Fragmentation Threshold...

Page 71 - This page will be refreshed automatically every 5 seconds.

TL-WR710N WiFi Pocket Router/AP/TV Adapter/Repeater - 56 - ¾ Current Status - The connected wireless station's running status, one of STA-AUTH / STA-ASSOC / STA-JOINED / WPA / WPA-PSK / WPA2 / WPA2-PSK / AP-UP / AP-DOWN / Disconnected ¾ Received Packets - Packets received by the station ¾ Sent Packe...

Page 72 - Figure 4-28 DHCP Settings; Disable

TL-WR710N WiFi Pocket Router/AP/TV Adapter/Repeater - 57 - Figure 4-28 DHCP Settings ¾ DHCP Server - Enable or Disable the DHCP server. If you disable the Server, you must have another DHCP server within your network or else you must configure the computer manually. ¾ Start IP Address - Specify an I...

Page 76 - USB device, you need to click the; Rescan; button first. Simply pulling USB drive out of the

TL-WR710N WiFi Pocket Router/AP/TV Adapter/Repeater - 61 - Figure 4-34 Safe Unplug Message Click the Rescan button to start a new scan. Follow the instructions below to set up your router as a file server: 1. Plug an external USB hard disk drive or USB flash drive into this router. 2. Click the Resc...

Page 80 - net use; Figure 4-41 The Forwarding menu

TL-WR710N WiFi Pocket Router/AP/TV Adapter/Repeater - 65 - ¾ Storage Authority – Choose Read and Write or Read Only from the drop-down list to assign access authority of Storage Sharing to the user. ¾ Save - You can click the Save button to save your settings. ¾ Back - You can click the Back button ...

Page 82 - Figure 4-43 Add or Modify a Virtual Server Entry; service, and enter the same IP Address for that computer or server.; Security; ” page to be any other value except 80 such as 8080.

TL-WR710N WiFi Pocket Router/AP/TV Adapter/Repeater - 67 - Figure 4-43 Add or Modify a Virtual Server Entry ) Note: If your computer or server has more than one type of available service, please select another service, and enter the same IP Address for that computer or server. To modify or delete an...

Page 84 - Figure 4-45 Add or Modify a Port Triggering Entry; connection of other hosts on LAN will be refused.

TL-WR710N WiFi Pocket Router/AP/TV Adapter/Repeater - 69 - 5. Select Enabled in Status field. 6. Click the Save button to save the new rule. Figure 4-45 Add or Modify a Port Triggering Entry To modify or delete an existing entry: 1. Click the Modify in the entry you want to modify. If you want to de...

Page 88 - Dos Protection will take effect only when the; Traffic Statistics; in “; System Tool

TL-WR710N WiFi Pocket Router/AP/TV Adapter/Repeater - 73 - Figure 4-50 Advanced Security ¾ Packets Statistics Interval (5~60) - The default value is 10. Select a value between 5 and 60 seconds from the drop-down list. The Packets Statistics Interval value indicates the time section of the packets st...

Page 89 - Figure 4-51 Local Management

TL-WR710N WiFi Pocket Router/AP/TV Adapter/Repeater - 74 - ¾ Enable TCP-SYN-FLOOD Attack Filtering - Enable or Disable the TCP-SYN-FLOOD Attack Filtering. ¾ TCP-SYN-FLOOD Packets Threshold (5~3600) - The default value is 50. Enter a value between 5 ~ 3600. When the current TCP-SYN-FLOOD Packets numb...

Page 90 - for more than 5 seconds to reset the Router to factory defaults.; Web Management Port

TL-WR710N WiFi Pocket Router/AP/TV Adapter/Repeater - 75 - use the password to browse the built-in web pages to perform Administrator tasks while all the others will be blocked. After click the Add button, your PC's MAC Address will be placed in the list above. Click the Save button to save your set...

Page 91 - Parental Control; Parental Control Settings

TL-WR710N WiFi Pocket Router/AP/TV Adapter/Repeater - 76 - 4.12 Parental Control Choose menu “ Parental Control ”, and you can configure the parental control in the screen as shown in Figure 4-53. The Parental Control function can be used to control the internet activities of the child, limit the ch...

Page 92 - Add or Modify Parental Control Entry

TL-WR710N WiFi Pocket Router/AP/TV Adapter/Repeater - 77 - 4. Enter the allowed domain name of the website, either the full name or the keywords (e.g. google) in the Allowed Domain Name field. Any domain name with keywords in it (e.g.

Page 93 - Access Control; Figure 4-56 The Access Control menu

TL-WR710N WiFi Pocket Router/AP/TV Adapter/Repeater - 78 - 2. Click “ Access Restriction → Schedule ” on the left to enter the Schedule Settings page. Click Add New... button to create a new schedule with Schedule Description is Schedule_1, Day is Sat and Time is all day-24 hours. 3. Click “ Parenta...

Page 94 - Figure 4-57 Access Control Rule Management

TL-WR710N WiFi Pocket Router/AP/TV Adapter/Repeater - 79 - Figure 4-57 Access Control Rule Management ¾ Enable Internet Access Control - Select the check box to enable the Internet Access Restriction function, so the Default Filter Policy can take effect. ¾ Rule Name - Here displays the name of the ...

Page 95 - Figure 4-58 Add or Modify Internet Access Restriction Entry

TL-WR710N WiFi Pocket Router/AP/TV Adapter/Repeater - 80 - 6. In the Action field, select Deny or Allow . 7. In the Status field, select Enabled or Disabled to enable or disable your entry. 8. Click the Save button. Click the Enable All button to enable all the rules in the list. Click the Disable A...

Page 96 - Figure 4-60 Host Settings

TL-WR710N WiFi Pocket Router/AP/TV Adapter/Repeater - 81 - z In Rule Name field, create a name for the rule. Note that this name should be unique, for example Rule_1. z In Host field, select Host_1. z In Target field, select Target_1. z In Schedule field, select Schedule_1. z In Action field, select...

Page 98 - Figure 4-64 Target Settings

TL-WR710N WiFi Pocket Router/AP/TV Adapter/Repeater - 83 - Figure 4-63 Host Settings 4.13.3 Target Choose menu “ Access Control → Target ”, you can view and set a Target list in the screen as shown in Figure 4-64. The target list is necessary for the Access Restriction Rule. Figure 4-64 Target Setti...

Page 100 - Figure 4-68 Schedule Settings

TL-WR710N WiFi Pocket Router/AP/TV Adapter/Repeater - 85 - Then you will go back to the Target Settings page and see the following list, Figure 4-67 Target Settings 4.13.4 Schedule Choose menu “ Access Control → Schedule ”, you can view and set a Schedule list in the next screen as shown in Figure 4...

Page 101 - Figure 4-69 Advanced Schedule Settings

TL-WR710N WiFi Pocket Router/AP/TV Adapter/Repeater - 86 - Click the Next button to go to the next page, or click the Previous button return to the previous page. Figure 4-69 Advanced Schedule Settings For example : If you desire to restrict the internet activities of host with MAC address 00-11-22-...

Page 102 - Advanced Routing; Figure 4-71 The Advanced Routing Menu

TL-WR710N WiFi Pocket Router/AP/TV Adapter/Repeater - 87 - 4.14 Advanced Routing Figure 4-71 The Advanced Routing Menu There are two submenus under the Network menu (shown in Figure 4-71): Static Routing List and System Routing Table . Click any of them, and you will be able to configure the corresp...

Page 104 - Bandwidth Control; Figure 4-75 The Bandwidth Control menu

TL-WR710N WiFi Pocket Router/AP/TV Adapter/Repeater - 89 - 4.15 Bandwidth Control Figure 4-75 The Bandwidth Control menu There are two submenus under the Bandwidth Control menu as shown in Figure 4-75. Click any of them, and you will be able to configure the corresponding function. The detailed expl...

Page 108 - interference to the IP & MAC Binding list.

TL-WR710N WiFi Pocket Router/AP/TV Adapter/Repeater - 93 - Click the Enable All button to make all entries enabled. Click the Delete All button to delete all entries. 4.16.2 ARP List To manage the computer, you could observe the computers in the LAN by checking the relationship of MAC address and IP...

Page 109 - DNS client service provider will give you a password or key.; Logout; button, then input your new username and password and click the; Login

TL-WR710N WiFi Pocket Router/AP/TV Adapter/Repeater - 94 - dynamic IP address, and then your friends can connect to your server by entering your domain name no matter what your IP address is. Before using this feature, you need to sign up for DDNS service providers such as

Page 111 - Figure 4-87 The System Tools menu

TL-WR710N WiFi Pocket Router/AP/TV Adapter/Repeater - 96 - Figure 4-86 Dyndns.org DDNS Settings To set up for DDNS, follow these instructions: 1. Type the User Name for your DDNS account. 2. Type the Password for your DDNS account. 3. Type the Domain Name you received from dynamic DNS service provid...

Page 113 - The time will be lost if the router is turned off.

TL-WR710N WiFi Pocket Router/AP/TV Adapter/Repeater - 98 - ¾ The time will be lost if the router is turned off. ¾ The router will obtain GMT automatically from Internet if it has already connected to Internet. 4.18.2 Diagnostic Choose menu “ System Tools → Diagnostic ”, you can transact Ping or Trac...

Page 115 - Set your IP address as static IP before upgrading.; File

TL-WR710N WiFi Pocket Router/AP/TV Adapter/Repeater - 100 - ) Note: 1. When you upgrade the router's firmware, you will lose current configuration settings, so make sure you backup the router’s settings before you upgrade its firmware. 2. Make sure that your computer is connected to the Internet thr...

Page 116 - restoring process to prevent any damage.

TL-WR710N WiFi Pocket Router/AP/TV Adapter/Repeater - 101 - 4.18.5 Backup & Restore This page allows you to save current configuration of router as backup or restore the configuration file you saved before. Figure 4-93 Backup & Restore Configuration ¾ Click the Backup button to save all conf...

Page 117 - any spaces. Enter the new Password twice to confirm it.

TL-WR710N WiFi Pocket Router/AP/TV Adapter/Repeater - 102 - ¾ Web Service Port of the router. ¾ Upgrade the firmware of the router (system will reboot automatically). ¾ Restore the router's settings to factory default (system will reboot automatically). 4.18.7 Password This page allows you to change...

Page 118 - Figure 4-96 System Log; Refresh; - Refresh the page to show the latest log list.; Save Log; - Click to save all the logs in a txt file.; Mail Log; of the last; Packets Statistic interval

TL-WR710N WiFi Pocket Router/AP/TV Adapter/Repeater - 103 - Figure 4-96 System Log ¾ Refresh - Refresh the page to show the latest log list. ¾ Save Log - Click to save all the logs in a txt file. ¾ Mail Log - Click to send an email of current logs manually according to the address and validation inf...

Page 120 - Chapter 5. Configuration for Access Point Mode

TL-WR710N WiFi Pocket Router/AP/TV Adapter/Repeater - 105 - Chapter 5. Configuration for Access Point Mode This chapter will show each Web page's key functions and the configuration way for Access Point Mode of TL-WR710N. 5.1 Login After your successful login, you can configure and manage the device...

Page 121 - Figure 5-2 Status; Wired

TL-WR710N WiFi Pocket Router/AP/TV Adapter/Repeater - 106 - Figure 5-2 Status ¾ Firmware Version - The version information of the Router’s firmware. ¾ Hardware Version - The version information of the Router’s hardware. ¾ Wired - This field displays the current settings or information for the LAN, y...

Page 125 - Figure 5-5 Add A New Device

TL-WR710N WiFi Pocket Router/AP/TV Adapter/Repeater - 110 - The WPS Configuration Screen of Wireless Adapter ) Note: In this example, the default PIN code of this adapter is 16952898 as the above figure shown. Step 2: Keep the WPS Status as Enabled and click the Add Device button in Figure 5-3. Step...

Page 128 - to config IP address manually.; IP Address; - An address code that determines the size of the network. Normally; IGMP Proxy; Figure 5-10 Wireless menu

TL-WR710N WiFi Pocket Router/AP/TV Adapter/Repeater - 113 - Figure 5-9 LAN ¾ MAC Address - The physical address of the LAN ports, as seen from the LAN. The value can not be changed. ¾ Type - Choosing Smart IP (DHCP) to get IP address from DHCP server, or choosing static IP to config IP address manua...

Page 131 - Figure 5-12 Wireless Security; If you check the

TL-WR710N WiFi Pocket Router/AP/TV Adapter/Repeater - 116 - Figure 5-12 Wireless Security ¾ Disable Security - The wireless security function can be enabled or disabled. If disabled, the wireless stations will be able to connect the Router without encryption. But it’s strongly recommended to choose ...

Page 135 - Choose menu “; ”, and then you can configure the advanced; Fragmentation Threshold -; This value is the maximum size determining whether packets

TL-WR710N WiFi Pocket Router/AP/TV Adapter/Repeater - 120 - 5.7.4 Wireless Advanced Choose menu “ Wireless → Wireless Advanced ”, and then you can configure the advanced settings of your wireless network. Figure 5-16 Wireless Advanced ¾ Transmit Power - Here you can specify the transmit power of Rou...

Page 136 - Figure 5-17 Wireless Statistics

TL-WR710N WiFi Pocket Router/AP/TV Adapter/Repeater - 121 - messages for associated clients, it sends the next DTIM with a DTIM Interval value. You can specify the value between 1-255 Beacon Intervals. The default value is 1, which indicates the DTIM Interval is the same as Beacon Interval. ¾ Enable...

Page 137 - Figure 5-19 DHCP Settings

TL-WR710N WiFi Pocket Router/AP/TV Adapter/Repeater - 122 - If the numbers of connected wireless stations go beyond one page, click the Next button to go to the next page and click the Previous button to return the previous page. ) Note: This page will be refreshed automatically every 5 seconds. 5.8...

Page 138 - Network; function will be disabled. You will see the page as below.

TL-WR710N WiFi Pocket Router/AP/TV Adapter/Repeater - 123 - ¾ Start IP Address - Specify an IP address for the DHCP Server to start with when assigning IP addresses. 192.168.0.100 is the default start address. ¾ End IP Address - Specify an IP address for the DHCP Server to end with when assigning IP...

Page 143 - - You can delete the share folder by click; Delete; Figure 5-28 Media Server Setting; Start; Figure 5-29 Media Server Setting

TL-WR710N WiFi Pocket Router/AP/TV Adapter/Repeater - 128 - ¾ Delete - You can delete the share folder by click Delete . To set up your media server, please follow the instructions below: 1. Plug an external USB hard disk drive or USB flash drive into this router, and then the screen will appear as ...

Page 146 - Please restart the service for the new settings to take effect.; Windows logo; to open the Run dialog box and type; Figure 5-33 The System Tools menu

TL-WR710N WiFi Pocket Router/AP/TV Adapter/Repeater - 131 - ¾ User Name - Type the user name that you want to give access to the USB drive. The user name must be composed of alphanumeric symbols not exceeding 15 characters in length. ¾ Password - Enter the password in the Password field. The passwor...

Page 148 - Ping; function. Option “Tracert Hops” are used for; Tracert; Figure 5-36 Firmware Upgrade

TL-WR710N WiFi Pocket Router/AP/TV Adapter/Repeater - 133 - ¾ Traceroute Max TTL - The max number of hops for a Traceroute connection. The default is 20. Click Start to check the connectivity of the Internet. The Diagnostic Results page displays the result of diagnosis. If the result is similar to t...

Page 149 - Figure 5-37 Restore Factory Default; All changed settings will be lost when defaults are restored.

TL-WR710N WiFi Pocket Router/AP/TV Adapter/Repeater - 134 - 3. Click the Upgrade button. ) Note: 1. New firmware versions ar

Page 150 - Figure 5-38 Backup & Restore Configuration; upgrading process to prevent any damage.; Figure 5-39 Reboot the Router

TL-WR710N WiFi Pocket Router/AP/TV Adapter/Repeater - 135 - 5.10.4 Backup & Restore Choose menu “ System Tools → Backup & Restore ”, and then you can save the current configuration of the Router as a backup file and restore the configuration via a backup file as shown in Figure 5-38. Figure ...

Page 151 - Figure 5-40 Password; spaces. Enter the new Password twice to confirm.

TL-WR710N WiFi Pocket Router/AP/TV Adapter/Repeater - 136 - ¾ Change the Web Management Port. ¾ Upgrade the firmware of the Router (system will reboot automatically). ¾ Restore the Router's settings to factory defaults (system will reboot automatically). ¾ Update the configuration with the file (sys...

Page 152 - Figure 5-41 System Log

TL-WR710N WiFi Pocket Router/AP/TV Adapter/Repeater - 137 - 5.10.7 System Log Choose menu “ System Tools → System Log ”, and then you can view the logs of the Router. Figure 5-41 System Log ¾ Refresh - Refresh the page to show the latest log list. ¾ Save Log - Click to save all the logs in a txt fil...

Page 153 - Chapter 6. Configuration for Repeater Mode

TL-WR710N WiFi Pocket Router/AP/TV Adapter/Repeater - 138 - Chapter 6. Configuration for Repeater Mode This chapter will show each Web page's key functions and the configuration way for Repeater Mode of TL-WR710N. 6.1 Login After your successful login, you can configure and manage the device. There ...

Page 154 - Figure 6-2 Status

TL-WR710N WiFi Pocket Router/AP/TV Adapter/Repeater - 139 - Figure 6-2 Status ¾ Firmware Version - The version information of the Router’s firmware. ¾ Hardware Version - The version information of the Router’s hardware. ¾ Wired - This field displays the current settings or information for the LAN, y...

Page 155 - Figure 6-3 Working Mode

TL-WR710N WiFi Pocket Router/AP/TV Adapter/Repeater - 140 - • Channel Width - The current wireless channel width in use. • MAC Address - The physical address of the Router, as seen from the WLAN. ¾ Traffic Statistics - The Router’s traffic statistics. • Received (Bytes) - Traffic that counted in byt...

Page 156 - Figure 6-4 the Network menu

TL-WR710N WiFi Pocket Router/AP/TV Adapter/Repeater - 141 - ¾ WISP Client Router - In this mode, the device enables multiple users to share Internet connection from WISP. 6.5 Network Figure 6-4 the Network menu There is only one submenu under the Network menu (shown in Figure 6-4): LAN . 6.5.1 LAN C...

Page 157 - Figure 6-6 Wireless menu

TL-WR710N WiFi Pocket Router/AP/TV Adapter/Repeater - 142 - 6.6 Wireless Figure 6-6 Wireless menu There are five submenus under the Wireless menu (shown in Figure 6-6): Wireless Settings , Wireless Security, MAC Filtering, Wireless Advanced and Wireless Statistics . Click it, and you will be able to...

Page 158 - Enable Wireless Radio -; The wireless radio of the Router can be enabled or disabled to; Survey; Be sure to click the; button to save your settings on this page.

TL-WR710N WiFi Pocket Router/AP/TV Adapter/Repeater - 143 - • 11bg mixed - Select if you are using both 802.11b and 802.11g wireless clients. • 11bgn mixed - Select if you are using a mix of 802.11b, 11g, and 11n wireless clients. When 11bg mixed mode is selected, only 11bg mixed wireless stations c...

Page 159 - ”, and then you can configure the security; Figure 6-9 Wireless Security

TL-WR710N WiFi Pocket Router/AP/TV Adapter/Repeater - 144 - z Near the center of the area in which your wireless stations will operate. z In an elevated location such as a high shelf. z Away from the potential sources of interference, such as PCs, microwaves, and cordless phones. z Away from large m...

Page 161 - Figure 6-11 Wireless MAC Filtering

TL-WR710N WiFi Pocket Router/AP/TV Adapter/Repeater - 146 - length. ASCII format stands for any combination of keyboard characters in the specified length. • WEP Key (Password) - Select which of the four keys will be used and enter the matching WEP key that you create. Make sure these values are ide...

Page 162 - Figure 6-12 Add or Modify Wireless MAC Address Filtering entry

TL-WR710N WiFi Pocket Router/AP/TV Adapter/Repeater - 147 - To Add a Wireless MAC Address filtering entry, click the Add New… button. The " Add or Modify Wireless MAC Address Filtering entry " page will appear, shown in Figure 6-12: Figure 6-12 Add or Modify Wireless MAC Address Filtering en...

Page 164 - Figure 6-14 Wireless Statistics

TL-WR710N WiFi Pocket Router/AP/TV Adapter/Repeater - 149 - ¾ RTS Threshold - Here you can specify the RTS (Request to Send) Threshold. If the packet is larger than the specified RTS Threshold size, the Router will send RTS frames to a particular receiving station and negotiate the sending of a data...

Page 166 - Figure 6-16 DHCP Settings; LAN, the DHCP Server function

TL-WR710N WiFi Pocket Router/AP/TV Adapter/Repeater - 151 - Figure 6-16 DHCP Settings ¾ DHCP Server - Enable or Disable the DHCP server. If you disable the Server, you must have another DHCP server within your network or else you must configure the computer manually. ¾ Start IP Address - Specify an ...

Page 167 - Figure 6-18 DHCP Client List

TL-WR710N WiFi Pocket Router/AP/TV Adapter/Repeater - 152 - Figure 6-17 DHCP Settings 6.7.2 DHCP Client List Choose menu “ DHCP → DHCP Client List ”, and then you can view the information about the clients attached to the Router in the screen as shown in Figure 6-18. Figure 6-18 DHCP Client List ¾ C...

Page 169 - Figure 6-21 The USB Settings menu

TL-WR710N WiFi Pocket Router/AP/TV Adapter/Repeater - 154 - 6.8 USB Settings Figure 6-21 The USB Settings menu There are three submenus under the USB Settings menu (shown in Figure 6-21), Storage Sharing , Media Server and User Accounts . Click any of them, and you will be able to configure the corr...

Page 175 - Figure 6-30 The System Tools menu

TL-WR710N WiFi Pocket Router/AP/TV Adapter/Repeater - 160 - 6.9 System Tools Figure 6-30 The System Tools menu Choose menu “ System Tools ”, and then you can see the submenus under the main menu: Diagnostic , Firmware Upgrade , Factory Defaults, Backup & Restore, Reboot, Password, and System Log...

Page 177 - Figure 6-33 Firmware Upgrade; configuration, you can try to upgrade the firmware.

TL-WR710N WiFi Pocket Router/AP/TV Adapter/Repeater - 162 - 6.9.2 Firmware Upgrade Choose menu “ System Tools → Firmware Upgrade ”, and then you can update the latest version of firmware for the Router on the following screen. Figure 6-33 Firmware Upgrade ¾ Firmware Version - This displays the curre...

Page 178 - Figure 6-34 Restore Factory Default; Figure 6-35 Backup & Restore Configuration

TL-WR710N WiFi Pocket Router/AP/TV Adapter/Repeater - 163 - 6.9.3 Factory Defaults Choose menu “ System Tools → Factory Defaults ”, and you can restore the configurations of the Router to factory defaults on the following screen. Figure 6-34 Restore Factory Default Click the Restore button to reset ...

Page 179 - Figure 6-36 Reboot the Router

TL-WR710N WiFi Pocket Router/AP/TV Adapter/Repeater - 164 - ) Note: The current configuration will be covered by the uploading configuration file. The upgrade process lasts for 20 seconds and the Router will restart automatically. Keep the Router on during the upgrading process to prevent any damage...

Page 180 - Figure 6-37 Password

TL-WR710N WiFi Pocket Router/AP/TV Adapter/Repeater - 165 - 6.9.6 Password Choose menu “ System Tools → Password ”, and then you can change the factory default user name and password of the Router in the next screen as shown in Figure 6-37. Figure 6-37 Password It is strongly recommended that you sh...

Page 181 - Figure 6-38 System Log

TL-WR710N WiFi Pocket Router/AP/TV Adapter/Repeater - 166 - 6.9.7 System Log Choose menu “ System Tools → System Log ”, and then you can view the logs of the Router. Figure 6-38 System Log ¾ Refresh - Refresh the page to show the latest log list. ¾ Save Log - Click to save all the logs in a txt file...

Page 182 - Chapter 7. Configuration for Client Mode

TL-WR710N WiFi Pocket Router/AP/TV Adapter/Repeater - 167 - Chapter 7. Configuration for Client Mode This chapter will show each Web page's key functions and the configuration way for Client Mode of TL-WR710N. 7.1 Login After your successful login, you can configure and manage the device. There are ...

Page 183 - Figure 7-2 Status

TL-WR710N WiFi Pocket Router/AP/TV Adapter/Repeater - 168 - Figure 7-2 Status ¾ Firmware Version - The version information of the Router’s firmware. ¾ Hardware Version - The version information of the Router’s hardware. ¾ Wired - This field displays the current settings or information for the LAN, y...

Page 184 - Figure 7-3 Working Mode

TL-WR710N WiFi Pocket Router/AP/TV Adapter/Repeater - 169 - • Channel Width - The current wireless channel width in use. • MAC Address - The physical address of the Router, as seen from the WLAN. ¾ Traffic Statistics - The Router’s traffic statistics. • Received (Bytes) - Traffic that counted in byt...

Page 185 - Figure 7-4 the Network menu

TL-WR710N WiFi Pocket Router/AP/TV Adapter/Repeater - 170 - ¾ WISP Client Router - In this mode, the device enables multiple users to share Internet connection from WISP. 7.5 Network Figure 7-4 the Network menu There is only one submenu under the Network menu (shown in Figure 7-4): LAN . 7.5.1 LAN C...

Page 186 - Figure 7-6 Wireless menu

TL-WR710N WiFi Pocket Router/AP/TV Adapter/Repeater - 171 - 3. When you choose the Smart IP (DHCP) mode, the DHCP Server function will be disabled. 7.6 Wireless Figure 7-6 Wireless menu There are two submenus under the Wireless menu (shown in Figure 7-6): Wireless Settings and Wireless Security . Cl...

Page 187 - The wireless radio of the AP can be enabled or disabled to allow or

TL-WR710N WiFi Pocket Router/AP/TV Adapter/Repeater - 172 - ¾ Enable Wireless Radio - The wireless radio of the AP can be enabled or disabled to allow or deny wireless stations to access. If enabled, the wireless stations will be able to access the AP, otherwise, wireless stations will not be able t...

Page 188 - Figure 7-8 Wireless Security

TL-WR710N WiFi Pocket Router/AP/TV Adapter/Repeater - 173 - Figure 7-8 Wireless Security ¾ Disable Security - The wireless security function can be enabled or disabled. If disabled, the wireless stations will be able to connect the Router without encryption. But it’s strongly recommended to choose o...

Page 190 - Figure 7-11 DHCP Settings

TL-WR710N WiFi Pocket Router/AP/TV Adapter/Repeater - 175 - 152-bit - You can enter 32 hexadecimal digits (any combination of 0-9, a-f, A-F, zero key is not promoted) or 16 ASCII characters. ) Note: If you do not set the key, the wireless security function is still disabled even if you have selected...

Page 191 - When you choose the

TL-WR710N WiFi Pocket Router/AP/TV Adapter/Repeater - 176 - ¾ Start IP Address - Specify an IP address for the DHCP Server to start with when assigning IP addresses. 192.168.0.100 is the default start address. ¾ End IP Address - Specify an IP address for the DHCP Server to end with when assigning IP...

Page 200 - Figure 7-25 The System Tools menu

TL-WR710N WiFi Pocket Router/AP/TV Adapter/Repeater - 185 - 7.9 System Tools Figure 7-25 The System Tools menu Choose menu “ System Tools ”, and then you can see the submenus under the main menu: Diagnostic , Firmware Upgrade , Factory Defaults, Backup & Restore, Reboot, Password, and System Log...

Page 202 - Figure 7-28 Firmware Upgrade

TL-WR710N WiFi Pocket Router/AP/TV Adapter/Repeater - 187 - 7.9.2 Firmware Upgrade Choose menu “ System Tools → Firmware Upgrade ”, and then you can update the latest version of firmware for the Router on the following screen. Figure 7-28 Firmware Upgrade ¾ Firmware Version - This displays the curre...

Page 203 - Figure 7-29 Restore Factory Default; Figure 7-30 Backup & Restore Configuration

TL-WR710N WiFi Pocket Router/AP/TV Adapter/Repeater - 188 - 7.9.3 Factory Defaults Choose menu “ System Tools → Factory Defaults ”, and you can restore the configurations of the Router to factory defaults on the following screen. Figure 7-29 Restore Factory Default Click the Restore button to reset ...

Page 204 - Figure 7-31 Reboot the Router

TL-WR710N WiFi Pocket Router/AP/TV Adapter/Repeater - 189 - ) Note: The current configuration will be covered by the uploading configuration file. The upgrade process lasts for 20 seconds and the Router will restart automatically. Keep the Router on during the upgrading process to prevent any damage...

Page 205 - Figure 7-32 Password

TL-WR710N WiFi Pocket Router/AP/TV Adapter/Repeater - 190 - 7.9.6 Password Choose menu “ System Tools → Password ”, and then you can change the factory default user name and password of the Router in the next screen as shown in Figure 7-32. Figure 7-32 Password It is strongly recommended that you sh...

Page 206 - Figure 7-33 System Log

TL-WR710N WiFi Pocket Router/AP/TV Adapter/Repeater - 191 - 7.9.7 System Log Choose menu “ System Tools → System Log ”, and then you can view the logs of the Router. Figure 7-33 System Log ¾ Refresh - Refresh the page to show the latest log list. ¾ Save Log - Click to save all the logs in a txt file...

Page 207 - Chapter 8. Configuration for WISP Client Router Mode

TL-WR710N WiFi Pocket Router/AP/TV Adapter/Repeater - 192 - Chapter 8. Configuration for WISP Client Router Mode This chapter will show each Web page's key functions and the configuration way for WISP Client Router Mode of TL-WR710N. 8.1 Login After your successful login, you can configure and manag...

Page 208 - Figure 8-2 Status; The version information of the Router’s firmware.

TL-WR710N WiFi Pocket Router/AP/TV Adapter/Repeater - 193 - Figure 8-2 Status ¾ Firmware Version - The version information of the Router’s firmware. ¾ Hardware Version - The version information of the Router’s hardware. ¾ LAN - This field displays the current settings or information for the LAN, you...

Page 210 - Figure 8-3 Working Mode

TL-WR710N WiFi Pocket Router/AP/TV Adapter/Repeater - 195 - Click the Release to delete the network parameters, and click the Renew button to obtaining network parameters. ¾ Traffic Statistics - The Router’s traffic statistics. • Received (Bytes) - Traffic that counted in bytes has been received out...

Page 211 - Figure 8-4 The Network menu

TL-WR710N WiFi Pocket Router/AP/TV Adapter/Repeater - 196 - ¾ WISP Client Router - In this mode, the device enables multiple users to share Internet connection from WISP. 8.5 Network Figure 8-4 The Network menu There are three submenus under the Network menu (shown in Figure 8-4): WAN , MAC Clone an...

Page 214 - the; Time-based Connecting

TL-WR710N WiFi Pocket Router/AP/TV Adapter/Repeater - 199 - • Dynamic IP - You can check this radio button to use Dynamic IP as the secondary connection to connect to the local area network provided by ISP. • Static IP - You can check this radio button to use Static IP as the secondary connection to...

Page 215 - Figure 8-8 PPPoE Advanced Settings

TL-WR710N WiFi Pocket Router/AP/TV Adapter/Repeater - 200 - Figure 8-8 PPPoE Advanced Settings ¾ MTU Size - The default MTU size is “1480” bytes, which is usually fine. It is not recommended that you change the default MTU Size unless required by your ISP. ¾ Service Name/AC Name - The service name a...

Page 220 - Figure 8-12 MAC Address Clone

TL-WR710N WiFi Pocket Router/AP/TV Adapter/Repeater - 205 - the Internet again. If you wish to activate Connect on Demand , check the radio button. If you want your Internet connection to remain active at all times, enter “0” in the Max Idle Time field. Otherwise, enter the number of minutes you wan...

Page 222 - Figure 8-14 Wireless menu; Wireless Settings; Figure 8-15 Wireless Security

TL-WR710N WiFi Pocket Router/AP/TV Adapter/Repeater - 207 - 8.6 Wireless Figure 8-14 Wireless menu There are five submenus under the Wireless menu (shown in Figure 8-14): Wireless Settings , Wireless Security, Wireless MAC Filtering, Wireless Advanced and Wireless Statistics . Click any of them, and...

Page 224 - Figure 8-16 Wireless Security

TL-WR710N WiFi Pocket Router/AP/TV Adapter/Repeater - 209 - 8.6.2 Wireless Security Figure 8-16 Wireless Security ¾ Disable Security - The wireless security function can be enabled or disabled. If disabled, the wireless stations will be able to connect the Router without encryption. But it’s strongl...

Page 226 - Figure 8-18 Wireless MAC Filtering

TL-WR710N WiFi Pocket Router/AP/TV Adapter/Repeater - 211 - 64-bit - You can enter 10 hexadecimal digits (any combination of 0-9, a-f, A-F, zero key is not promoted) or 5 ASCII characters. 128-bit - You can enter 26 hexadecimal digits (any combination of 0-9, a-f, A-F, zero key is not promoted) or 1...

Page 227 - Figure 8-19 Add or Modify Wireless MAC Address Filtering entry

TL-WR710N WiFi Pocket Router/AP/TV Adapter/Repeater - 212 - Figure 8-19 Add or Modify Wireless MAC Address Filtering entry To add or modify a MAC Address Filtering entry, follow these instructions: 1. Enter the appropriate MAC Address into the MAC Address field. The format of the MAC Address is XX-X...

Page 229 - Figure 8-22 Wireless Statistics

TL-WR710N WiFi Pocket Router/AP/TV Adapter/Repeater - 214 - particular receiving station and negotiate the sending of a data frame. The default value is 2346. ¾ Fragmentation Threshold - This value is the maximum size determining whether packets will be fragmented. Setting the Fragmentation Threshol...

Page 231 - Figure 8-24 DHCP Settings

TL-WR710N WiFi Pocket Router/AP/TV Adapter/Repeater - 216 - Figure 8-24 DHCP Settings ¾ DHCP Server - Enable or Disable the DHCP server. If you disable the Server, you must have another DHCP server within your network or else you must configure the computer manually. ¾ Start IP Address - Specify an ...

Page 239 - Figure 8-37 The Forwarding menu

TL-WR710N WiFi Pocket Router/AP/TV Adapter/Repeater - 224 - ¾ Storage Authority – Choose Read and Write or Read Only from the drop-down list to assign access authority of Storage Sharing to the user. ¾ Save - You can click the Save button to save your settings. ¾ Back - You can click the Back button...

Page 241 - Figure 8-39 Add or Modify a Virtual Server Entry

TL-WR710N WiFi Pocket Router/AP/TV Adapter/Repeater - 226 - Figure 8-39 Add or Modify a Virtual Server Entry ) Note: If your computer or server has more than one type of available service, please select another service, and enter the same IP Address for that computer or server. To modify or delete a...

Page 243 - Figure 8-41 Add or Modify a Port Triggering Entry

TL-WR710N WiFi Pocket Router/AP/TV Adapter/Repeater - 228 - 5. Select Enable in Status field. 6. Click the Save button to save the new rule. Figure 8-41 Add or Modify a Port Triggering Entry To modify or delete an existing entry: 1. Click the Modify in the entry you want to modify. If you want to de...

Page 248 - Figure 8-47 Local Management

TL-WR710N WiFi Pocket Router/AP/TV Adapter/Repeater - 233 - ¾ Enable TCP-SYN-FLOOD Attack Filtering - Enable or Disable the TCP-SYN-FLOOD Attack Filtering. ¾ TCP-SYN-FLOOD Packets Threshold (5~3600) - The default value is 50. Enter a value between 5 ~ 3600. When the current TCP-SYN-FLOOD Packets num...

Page 250 - Parental Control

TL-WR710N WiFi Pocket Router/AP/TV Adapter/Repeater - 235 - 8.11 Parental Control Choose menu “ Parental Control ”, and you can configure the parental control in the screen as shown in Figure 8-49. The Parental Control function can be used to control the internet activities of the child, limit the c...

Page 252 - Access Control; Figure 8-52 The Access Control menu

TL-WR710N WiFi Pocket Router/AP/TV Adapter/Repeater - 237 - 2. Click “ Access Restriction → Schedule ” on the left to enter the Schedule Settings page. Click Add New... button to create a new schedule with Schedule Description is Schedule_1, Day is Sat and Time is all day-24 hours. 3. Click “ Parent...

Page 253 - Figure 8-53 Access Control Rule Management

TL-WR710N WiFi Pocket Router/AP/TV Adapter/Repeater - 238 - Figure 8-53 Access Control Rule Management ¾ Enable Internet Access Restriction - Select the check box to enable the Internet Access Restriction function, so the Default Filter Policy can take effect. ¾ Rule Name - Here displays the name of...

Page 254 - Figure 8-54 Add or Modify Internet Access Restriction Entry

TL-WR710N WiFi Pocket Router/AP/TV Adapter/Repeater - 239 - 6. In the Action field, select Deny or Allow . 7. In the Status field, select Enabled or Disabled to enable or disable your entry. 8. Click the Save button. Click the Enable All button to enable all the rules in the list. Click the Disable ...

Page 255 - Figure 8-56 Host Settings

TL-WR710N WiFi Pocket Router/AP/TV Adapter/Repeater - 240 - z In Rule Name field, create a name for the rule. Note that this name should be unique, for example Rule_1. z In Host field, select Host_1. z In Target field, select Target_1. z In Schedule field, select Schedule_1. z In Action field, selec...

Page 257 - Figure 8-60 Target Settings

TL-WR710N WiFi Pocket Router/AP/TV Adapter/Repeater - 242 - Figure 8-59 Host Settings 8.12.3 Target Choose menu “ Access Control → Target ”, you can view and set a Target list in the screen as shown in Figure 4-64. The target list is necessary for the Access Restriction Rule. Figure 8-60 Target Sett...

Page 259 - Figure 8-64 Schedule Settings

TL-WR710N WiFi Pocket Router/AP/TV Adapter/Repeater - 244 - Then you will go back to the Target Settings page and see the following list, Figure 8-63 Target Settings 8.12.4 Schedule Choose menu “ Access Control → Schedule ”, you can view and set a Schedule list in the next screen as shown in Figure ...

Page 260 - Figure 8-65 Advanced Schedule Settings

TL-WR710N WiFi Pocket Router/AP/TV Adapter/Repeater - 245 - Click the Next button to go to the next page, or click the Previous button return to the previous page. Figure 8-65 Advanced Schedule Settings For example : If you desire to restrict the internet activities of host with MAC address 00-11-22...

Page 261 - Advanced Routing; Figure 8-67 The Advanced Routing Menu

TL-WR710N WiFi Pocket Router/AP/TV Adapter/Repeater - 246 - 8.13 Advanced Routing Figure 8-67 The Advanced Routing Menu There are two submenus under the Network menu (shown in Figure 4-71): Static Routing List and System Routing Table . Click any of them, and you will be able to configure the corres...

Page 263 - Bandwidth Control; Figure 8-71 The Bandwidth Control menu

TL-WR710N WiFi Pocket Router/AP/TV Adapter/Repeater - 248 - 8.14 Bandwidth Control Figure 8-71 The Bandwidth Control menu There are two submenus under the Bandwidth Control menu as shown in Figure 8-71. Click any of them, and you will be able to configure the corresponding function. The detailed exp...

Page 271 - Figure 8-83 The System Tools menu; There are nine submenus under the System Tools menu:; Time Settings

TL-WR710N WiFi Pocket Router/AP/TV Adapter/Repeater - 256 - 8.17 System Tools Figure 8-83 The System Tools menu There are nine submenus under the System Tools menu: Time Settings , Diagnostic , Firmware Upgrade , Factory Defaults, Backup and Restore, Reboot, Password, System Log and Statistics. Clic...

Page 281 - Forwarding; ” menu on the left; DMZ; radio

TL-WR710N WiFi Pocket Router/AP/TV Adapter/Repeater - 266 - Figure A-4 Virtual Servers Figure A-5 Add or Modify a Virtual server Entry ) Note: Your opposite side should call your WAN IP, which is displayed on the “Status” page. 4) How to enable DMZ Host: Log in to the Router, click the “ Forwarding ...

Page 283 - Figure A-9 Add or Modify a Virtual server Entry; The wireless stations cannot connect to the Router.; of your wireless stations.

TL-WR710N WiFi Pocket Router/AP/TV Adapter/Repeater - 268 - Figure A-9 Add or Modify a Virtual server Entry 5. The wireless stations cannot connect to the Router. 1) Make sure the " Enable Wireless Router Radio " is checked. 2) Make sure that the wireless stations' SSID accord with the Route...

Page 284 - Appendix B: Configuring the PC; button, and then click; Control Panel; Network and Internet Connections; icon, and then click on the; tab in the appearing window.

TL-WR710N WiFi Pocket Router/AP/TV Adapter/Repeater - 269 - Appendix B: Configuring the PC In this section, we’ll introduce how to install and configure the TCP/IP correctly in Windows XP. First make sure your Ethernet Adapter is working, refer to the adapter’s manual if necessary. 1. Configure TCP/...

Page 285 - tab is open on

TL-WR710N WiFi Pocket Router/AP/TV Adapter/Repeater - 270 - 4) In the prompt page that showed below, double click on the Internet Protocol (TCP/IP) . Figure B-0-2 5) The following TCP/IP Properties window will display and the IP Address tab is open on this window by default.

Page 286 - shown in the Figure below:; to keep your settings.

TL-WR710N WiFi Pocket Router/AP/TV Adapter/Repeater - 271 - 6) Select Obtain an IP address automatically, Choose Obtain DNS server automatically, as shown in the Figure below: Figure B-0-3 ) Note: For Windows 98 OS or before, the PC and Router may need to be restarted. 7) Click OK to keep your setti...

Page 287 - Appendix C: Specifications; General

TL-WR710N WiFi Pocket Router/AP/TV Adapter/Repeater - 272 - Appendix C: Specifications General Standards IEEE 802.11n, 802.11b, 802.11g Protocols TCP/IP, PPPoE, DHCP, ICMP, NAT, SNTP Port One 10/100Mbps LAN/WAN port One 10/100Mbps LAN port 10BASE-T: UTP category 3, 4, 5 cable (maximum 100m) EIA/TIA-...

Page 288 - Appendix D: Glossary

TL-WR710N WiFi Pocket Router/AP/TV Adapter/Repeater - 273 - Appendix D: Glossary ¾ 802.11n - 802.11n builds upon previous 802.11 standards by adding MIMO (multiple-input multiple-output). MIMO uses multiple transmitter and receiver antennas to allow for increased data throughput via spatial multiple...