TP-Link TP-PA2010P - Manuals

TP-Link TP-PA2010P – Manual in PDF format online.

Manuals:

Manual

Manual TP-Link TP-PA2010P

Summary

Page 2 - COPYRIGHT & TRADEMARKS; Specifications are subject to change without notice.

COPYRIGHT & TRADEMARKS Specifications are subject to change without notice. is a registered trademark of TP-LINK TECHNOLOGIES CO., LTD. Other brands and product names are trademarks or registered trademarks of their respective holders. No part of the specifications may be reproduced in any form ...

Page 3 - FCC STATEMENT; Reorient or relocate the receiving antenna.; CE Mark Warning

FCC STATEMENT This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses a...

Page 4 - Safety Information; Avoid water and wet locations.; This product can be used in the following countries:; AT BG BY CA CZ DE DK EE

Safety Information • When product has power button, the power button is one of the way to shut off the product; when there is no power button, the only way to completely shut off power is to disconnect the product or the power adapter from the power source. • Don’t disassemble the product, or make r...

Page 5 - DECLARATION OF CONFORMITY; For the following equipment:; AV200 Powerline Adapter with AC Pass Through; applicable to the product within the scope of Council Directives:; Yang Hongliang

TP-LINK TECHNOLOGIES CO., LTD DECLARATION OF CONFORMITY For the following equipment: Product Description: AV200 Powerline Adapter with AC Pass Through Model No.: TL-PA2010P Trademark: TP-LINK We declare under our own responsibility that the above products satisfy all the technical regulations applic...

Page 6 - CONTENTS; Physical Interface

CONTENTS Package Contents ........................................................................................................................................... 1 Chapter 1 Introduction ..............................................................................................................

Page 7 - Package Contents

TL-PA2010P AV200 Powerline Adapter with AC Pass Through 1 Package Contents The AV200 Powerline Adapter with AC Pass Through package contains the following items: ¾ One AV200 Powerline Adapter with AC Pass Through (There are two AV200 Powerline Adapters with AC Pass Through in Starter Kit) ¾ One RJ-4...

Page 8 - Chapter 1 Introduction; Pair; System Requirement

TL-PA2010P AV200 Powerline Adapter with AC Pass Through 2 Chapter 1 Introduction Congratulations on your purchase of this outstanding Powerline Adapter. This device is an AV200 Powerline Adapter with AC Pass Through which transforms your house’s existing electrical wiring into a ubiquitous networkin...

Page 10 - Chapter 2 Connecting Mechanism; Item

TL-PA2010P AV200 Powerline Adapter with AC Pass Through 4 Chapter 2 Connecting Mechanism 2.1 Introduction The Powerline Adapter supports up to 200Mbps data rate. With this high speed connection rate, this Powerline Adapter allows you to setup a high speed home network by using your home existing ele...

Page 11 - In power-saving mode, the Homeplug cannot be accessed via the; Interface

TL-PA2010P AV200 Powerline Adapter with AC Pass Through 5 On The Ethernet port is connected, but there is no data being transferred. Blinking The Ethernet port is transferring data. Ethernet LED Off The Ethernet port isn’t connected. ) Note: 5 minutes after the device connected to the adapter is tur...

Page 12 - Integrated; Connection Instruction

TL-PA2010P AV200 Powerline Adapter with AC Pass Through 6 Integrated Electrical Socket The integrated electrical socket allows additional devices or multiple sockets to be connected to the adapter just like to a normal wall socket. No electrical socket is lost. * The provided power plug may differ f...

Page 13 - Hardware Connection – Computer; Hardware Connection – Internet; ON

TL-PA2010P AV200 Powerline Adapter with AC Pass Through 7 2.5 Hardware Connection – Computer For those computers you wish to be networked by Powerline Adapter, each of the computers must be properly connected with a Powerline Adapter through an Ethernet (RJ-45) cable. Following are the steps to prop...

Page 14 - The hardware connection mechanism is shown below:

TL-PA2010P AV200 Powerline Adapter with AC Pass Through 8 The hardware connection mechanism is shown below: ) Note: Where the MAINS plug or an appliance coupler is used as the disconnected device, the disconnect device shall remain readily operable. The idle wall sockets or electrical outlets in you...

Page 15 - Chapter 3 Installing Management Utility; Note; automatically pop up on your computer’s screen.; Management Utility; , and then the program installation

TL-PA2010P AV200 Powerline Adapter with AC Pass Through 9 Chapter 3 Installing Management Utility Please verify that no other Powerline Adapter or any Encryption Management Utilities are installed before installing the provided software. If other Powerline Utilities are installed, uninstall them and...

Page 18 - Step 3: After the installation, a shortcut to the; “Powerline Utility”; application icon is provided on the

TL-PA2010P AV200 Powerline Adapter with AC Pass Through 12 Step 3: After the installation, a shortcut to the “Powerline Utility” application icon is provided on the windows desktop.

Page 19 - Chapter 4 Using the Management Utility; Double click on the icon; “Status”; The; Status

TL-PA2010P AV200 Powerline Adapter with AC Pass Through 13 Chapter 4 Using the Management Utility After you’d successfully installed the Powerline Adapter hardware and Management Utility software, you can set up or configure the devices according to your need. This Powerline Utility enables the user...

Page 22 - Password is unnecessary to enter for renaming.

TL-PA2010P AV200 Powerline Adapter with AC Pass Through 16 (1) Select the desired device and click the Modify button to display the following dialog. (2) Enter a new name for the selected adapter and enter its password (Take note of the password format). The password can be found on the back of adap...

Page 23 - System; Click the; Upgrade Firmware; following dialog will pop up.; NVM; network identity, general capabilities and operational modes.

TL-PA2010P AV200 Powerline Adapter with AC Pass Through 17 4.3 System The System tab window is for some basic settings of the adapter. On this tab window, you can upgrade the firmware to the latest version, reset the adapter’s settings to the factory defaults and configure all adapters’ network name...

Page 24 - Every Powerline Adapter on your home network; MUST; have the same; Network Password; for

TL-PA2010P AV200 Powerline Adapter with AC Pass Through 18 If you want to upgrade the version of firmware for the device, please select appropriate Firmware and PIB files together. New firmware versions and PIB files are posted at www.tp-link.com and can be downloaded for free. ) Note: The parameter...

Page 25 - Chapter 5 Advanced Feature: How to Use the Pair Buttons; powerline devices which also support the; Set Up a Powerline AV Network with the Pair Button; button on only; Create a Powerline network using the Pair button

TL-PA2010P AV200 Powerline Adapter with AC Pass Through 19 Chapter 5 Advanced Feature: How to Use the Pair Buttons 5.1 Pair (Secure with 128 bits-AES) The Homeplug AV standard uses 128-bit AES (Advanced Encryption Standard) to safely transmit data between powerline adapters. For the powerline adapte...

Page 26 - . Press and hold the Pair button on Powerline adapter C for 1 second.; The sequence of Step 1 and Step 2 can be exchanged.; Leave

TL-PA2010P AV200 Powerline Adapter with AC Pass Through 20 Join an existing Powerline AV Network: Powerline adapter A and Powerline adapter B form a HomeplugAV Network, Powerline adapter C wants to join this network. Step 1 . Press and hold the Pair button on Powerline adapter C for 1 second. Step 2...

Page 27 - Appendix A: Troubleshooting; Power LED does not light up.

TL-PA2010P AV200 Powerline Adapter with AC Pass Through 21 Appendix A: Troubleshooting The Troubleshooting provides answers to common problems regarding the Powerline Adapter. 1. The Power LED does not light up. Ans. Check the following: a) Make sure that the Powerline Adapter is properly plugged in...