Page 2 - COPYRIGHT & TRADEMARKS; Specifications are subject to change without notice.
COPYRIGHT & TRADEMARKS Specifications are subject to change without notice. is a registered trademark of TP-LINK TECHNOLOGIES CO., LTD. Other brands and product names are trademarks or registered trademarks of their respective holders. No part of the specifications may be reproduced in any form ...
Page 3 - FCC STATEMENT; Reorient or relocate the receiving antenna.; FCC RF Radiation Exposure Statement:
FCC STATEMENT This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses a...
Page 4 - 당해; NCC Notice & BSMI Notice; 注意!; 依據 低功率電波輻射性電機管理辦法
CE Mark Warning This is a class B product. In a domestic environment, this product may cause radio interference, in which case the user may be required to take adequate measures. Canadian Compliance Statement This device complies with Industry Canada license-exempt RSS standard(s). Operation is subj...
Page 5 - 安全諮詢及注意事項; Safety Information
第十四條 低功率射頻電機之使用不得影響飛航安全及干擾合法通行；經發現有干擾現象時，應立 即停用，並改善至無干擾時方得繼續使用。前項合法通信，指依電信規定作業之無線電信。低功率 射頻電機需忍受合法通信或工業、科學以及醫療用電波輻射性電機設備之干擾。 安全諮詢及注意事項 ●請使用原裝電源供應器或只能按照本產品注明的電源類型使用本產品。 ●清潔本產品之前請先拔掉電源線。請勿使用液體、噴霧清潔劑或濕布進行清潔。 ●注意防潮，請勿將水或其他液體潑灑到本產品上。 ●插槽與開口供通風使用，以確保本產品的操作可靠並防止過熱，請勿堵塞或覆蓋開口。 ●請勿將本產品置放於靠近熱源的地方。除非有正常的通風，否則不...
Page 6 - DECLARATION OF CONFORMITY; For the following equipment:; The product carries the CE Mark:; Person responsible for marking this declaration:; Yang Hongliang
TP-LINK TECHNOLOGIES CO., LTD TP-LINK TECHNOLOGIES CO., LTD. Building 24 (floors 1, 3, 4, 5), and 28 (floors 1-4) Central Science and Technology Park, Shennan Rd, Nanshan, Shenzhen, China DECLARATION OF CONFORMITY For the following equipment: Product Description: 150Mbps Wireless N Mini Pocket Route...
Page 7 - CONTENTS
- I - CONTENTS Package Contents..................................................................................................................................1 Chapter 1. Introduction ................................................................................................................
Page 15 - 50Mbps Wireless N Mini Pocket Router; Package Contents; missing, please contact with your distributor.; The provided power plug may differ from the picture due
TL-WR710N 150Mbps Wireless N Mini Pocket Router - 1 - Package Contents The following items should be found in your package: ¾ One TL-WR710N 150Mbps Wireless N Mini Pocket Router ¾ Quick Installation Guide ¾ One RJ-45 Ethernet Cable ¾ One Resource CD for TL-WR710N 150Mbps Wireless N Mini Pocket Route...
Page 16 - Chapter 1. Introduction; Overview of the Router; else for work or play.; Flexible Access Control
TL-WR710N 150Mbps Wireless N Mini Pocket Router - 2 - Chapter 1. Introduction 1.1 Overview of the Router Small enough to fit in the average pocket, the TL-WR710N 150Mbps Wireless N Mini Pocket Router is uniquely suited to provide robust wireless networking to travelers, students, or anyone else for ...
Page 19 - Chapter 2. Connecting the Router; System Requirements; Installation Environment Requirements; WISP
TL-WR710N 150Mbps Wireless N Mini Pocket Router - 5 - Chapter 2. Connecting the Router 2.1 System Requirements ¾ Each PC in the LAN needs a working Ethernet Adapter ¾ TCP/IP protocol must be installed on each PC ¾ Web browser, such as Microsoft Internet Explorer 5.0 or later, Mozilla Firefox, Apple ...
Page 20 - port LAN and wireless way.
TL-WR710N 150Mbps Wireless N Mini Pocket Router - 6 - 2.3.1 Wireless Router Mode As a wireless router, TL-WR710N enables multi-user to share Internet via DSL/Cable Modem. The default mode of TL-WR710N is Wireless Router. On this mode, the wired port LAN/WAN works as WAN, it can be connected to DSL M...
Page 21 - Figure 2-2 Hardware Installation of the TL-WR710N in AP Mode
TL-WR710N 150Mbps Wireless N Mini Pocket Router - 7 - Figure 2-2 Hardware Installation of the TL-WR710N in AP Mode 1. Connect the LAN or LAN/WAN port of TL-WR710N to the wired network port with an Ethernet cable. 2. Plug the power plug of TL-WR710N in electrical wall socket. 3. Power on the PC(s) an...
Page 22 - either wired or wireless way.
TL-WR710N 150Mbps Wireless N Mini Pocket Router - 8 - ) Note: It is recommended that you connect a PC/notebook to the LAN port of the Router with an Ethernet cable, and then login the Router from the PC/notebook to set the Router in Repeater mode. 2.3.4 Client Mode TL-WR710N is used as a wireless ne...
Page 23 - Plug the power plug of TL-WR710N in electrical wall socket.
TL-WR710N 150Mbps Wireless N Mini Pocket Router - 9 - Figure 2-5 Hardware Installation of the TL-WR710N in WISP Client Router Mode 1. Plug the power plug of TL-WR710N in electrical wall socket. 2. Power on the notebook(s).
Page 24 - Chapter 3. Quick Installation Guide; Quick Setup
TL-WR710N 150Mbps Wireless N Mini Pocket Router - 10 - Chapter 3. Quick Installation Guide This chapter will show you how to configure the basic functions of your TL-WR710N 150Mbps Wireless N Mini Pocket Router using Quick Setup Wizard within minutes. 3.1 TCP/IP Configuration The default IP address ...
Page 25 - default; SSID; and; of your Router are on the label. Both are case-sensitive.; Network key; is the; Password
TL-WR710N 150Mbps Wireless N Mini Pocket Router - 11 - 2) Enter the Security key . Click OK . 3) If you can see Connected after the default SSID, you’ve successfully connected to the wireless network. ) Note: 1. The default SSID and Password of your Router are on the label. Both are case-sensitive. ...
Page 26 - Figure 3-1 Success result of Ping command; and the Router has failed.; Figure 3-2 Failure result of Ping command; Please check the connection following these steps:; Is the connection between your PC and the Router correct?
TL-WR710N 150Mbps Wireless N Mini Pocket Router - 12 - Figure 3-1 Success result of Ping command ¾ If the result displayed is similar to the Figure 3-2, it means the connection between your PC and the Router has failed. Figure 3-2 Failure result of Ping command Please check the connection following ...
Page 27 - Quick Installation Guide; Figure 3-3 Login Windows; the Using Proxy checkbox, and click; OK; Figure 3-4 Quick Setup
TL-WR710N 150Mbps Wireless N Mini Pocket Router - 13 - 3.2 Quick Installation Guide With a Web-based utility, it is easy to configure and manage the TL-WR710N 150Mbps Wireless N Mini Pocket Router. The Web-based utility can be used on any Windows, Macintosh or UNIX OS with a Web browser, such as Mic...
Page 28 - When you choose; Wireless; on; Working Mode; , take the following; Next; in; WAN Connection Type; page will appear as shown in; Figure 3-6 Quick Setup - WAN Connection Type
TL-WR710N 150Mbps Wireless N Mini Pocket Router - 14 - Figure 3-5 Quick Setup - Working Mode ) Note: The Router supports five working modes for multi-user to access the Internet: Wireless Router , Access Point , Repeater , Client and WISP Client Router . In Wireless Router mode, the device enables m...
Page 30 - TEST; Region
TL-WR710N 150Mbps Wireless N Mini Pocket Router - 16 - 2. Then, the Wireless page will appear as shown in Figure 3-9 . Set the wireless parameters. It is recommended that you rename an SSID, choose a Security Type and enter a Password. Then click Next . Figure 3-9 Quick Setup - Wireless ¾ Wireless R...
Page 31 - If; 1bg mixed mode; is selected in the; Mode; selecting field will turn; Figure 3-10 Quick Setup – Finish
TL-WR710N 150Mbps Wireless N Mini Pocket Router - 17 - When 11bg mixed mode is selected, only 11bg mixed wireless stations can connect to the Router. It is strongly recommended that you set the Mode to 11bgn mixed, and all of 802.11b/g/n wireless stations can connect to the Router. ) Note: If 11bg m...
Page 33 - Figure 3-13 Quick Setup – Finish
TL-WR710N 150Mbps Wireless N Mini Pocket Router - 19 - ) Note: If 11bg mixed mode is selected in the Mode field, the Channel Width selecting field will turn grey and the value will become 20M, which is unable to be changed. ¾ Channel Width - Select any channel width from the pull-down list. The defa...
Page 37 - Figure 3-20 Quick Setup – WAN Connection Type
TL-WR710N 150Mbps Wireless N Mini Pocket Router - 23 - Figure 3-18 AP List 3. Click the Next button in Figure 3-19. You will then see the Finish page. Click the Reboot button to make your wireless configuration take effect and finish the Quick Setup . Figure 3-19 Quick Setup - Finish 3.2.5 WISP Clie...
Page 38 - For; Dynamic IP; Your ISP uses a DHCP service to assign your Router an IP address for; Static IP
TL-WR710N 150Mbps Wireless N Mini Pocket Router - 24 - ¾ PPPoE - For this connection, you will need your account name and password from your ISP. If you have applied ADSL to realize Dial-up service, you should choose this type. Under this condition, you should fill in both the User Name and Password...
Page 40 - Figure 3-25 Quick Setup – Finish; In an elevated location such as a high shelf.
TL-WR710N 150Mbps Wireless N Mini Pocket Router - 26 - ¾ Wireless Security Mode - You can configure the security settings of your wireless network. ¾ Wireless Password - Input the password of your Local SSID. 3. Click Survey button on the Wireless page as shown in Figure 3-20, and then AP List page ...
Page 41 - Chapter 4. Configuration for Wireless Router Mode
TL-WR710N 150Mbps Wireless N Mini Pocket Router - 27 - Chapter 4. Configuration for Wireless Router Mode This chapter will show each Web page's key functions and the configuration way for Wireless Router Mode of TL-WR710N. 4.1 Login After your successful login, you can configure and manage the devic...
Page 45 - the new device for WPS function meanwhile.
TL-WR710N 150Mbps Wireless N Mini Pocket Router - 31 - ) Note: To build a successful connection by WPS, you should also do the corresponding configuration of the new device for WPS function meanwhile. For the configuration of the new device, here takes the Wireless Adapter of our company for example...
Page 47 - Figure 4-5 Add A New Device
TL-WR710N 150Mbps Wireless N Mini Pocket Router - 33 - Step 3: Choose “ Enter the new device's PIN ” and enter the PIN code （ take 16952898 for example ） of the wireless adapter in the field after PIN as shown in the figure below. Then click Connect. Figure 4-5 Add A New Device Method Three: Enter t...
Page 48 - added to the network.; Wireless Router; Wireless Client Router; to save your choice,; Figure 4-7 Wireless Working Mode Settings; share Internet via DSL/Cable Modem. The only wired port works as WAN.
TL-WR710N 150Mbps Wireless N Mini Pocket Router - 34 - You will see the following screen when the new device has successfully connected to the network. Figure 4-6 ) Note: 1) The WPS LED on the AP will light green for five minutes if the device has been successfully added to the network. 2) The WPS f...
Page 49 - Figure 4-8 the Network menu
TL-WR710N 150Mbps Wireless N Mini Pocket Router - 35 - ¾ WISP Client Router - In this mode, the device enables multiple users to share Internet connection from WISP. 4.6 Network Figure 4-8 the Network menu There are three submenus under the Network menu (shown in Figure 4-8): WAN , MAC Clone and LAN...
Page 52 - Only when you have configured the system time on “; System Tools; function can take effect.
TL-WR710N 150Mbps Wireless N Mini Pocket Router - 38 - • Dynamic IP - You can check this radio button to use Dynamic IP as the secondary connection to connect to the local area network provided by ISP. • Static IP - You can check this radio button to use Static IP as the secondary connection to conn...
Page 53 - Figure 4-12 PPPoE Advanced Settings
TL-WR710N 150Mbps Wireless N Mini Pocket Router - 39 - Figure 4-12 PPPoE Advanced Settings ¾ MTU Size - The default MTU size is “1480” bytes, which is usually fine. It is not recommended that you change the default MTU Size unless required by your ISP. ¾ Service Name/AC Name - The service name and A...
Page 58 - Figure 4-16 MAC Address Clone
TL-WR710N 150Mbps Wireless N Mini Pocket Router - 44 - Idle Time field. Otherwise, enter the number of minutes you want to have elapsed before your Internet connection terminates. ¾ Connect Automatically - Connect automatically after the Router is disconnected. To use this option, check the radio bu...
Page 59 - Only the PC on your LAN can use the; MAC Address Clone; Address pool in the DHCP server will be configured automatically
TL-WR710N 150Mbps Wireless N Mini Pocket Router - 45 - Click the Save button to save your settings. ) Note: 1. Only the PC on your LAN can use the MAC Address Clone function. 2. If you change WAN MAC Address when the WAN connection is PPPoE, it will not take effect until the connection is re-establi...
Page 60 - Figure 4-18 Wireless menu
TL-WR710N 150Mbps Wireless N Mini Pocket Router - 46 - 4.7 Wireless Figure 4-18 Wireless menu There are five submenus under the Wireless menu (shown in Figure 4-18): Wireless Settings , Wireless Security, Wireless MAC Filtering, Wireless Advanced and Wireless Statistics . Click any of them, and you ...
Page 61 - Auto
TL-WR710N 150Mbps Wireless N Mini Pocket Router - 47 - the Router in a region other than one of those specified in this field. If your country or region is not listed, please contact your local government agency for assistance. ¾ Mode - Select the desired mode. The default setting is 11bgn mixed. • ...
Page 63 - Figure 4-21 Wireless Security; If you check the
TL-WR710N 150Mbps Wireless N Mini Pocket Router - 49 - Figure 4-21 Wireless Security ¾ Disable Security - The wireless security function can be enabled or disabled. If disabled, the wireless stations will be able to connect the Router without encryption. But it’s strongly recommended to choose one o...
Page 65 - Figure 4-23 Wireless MAC Filtering
TL-WR710N 150Mbps Wireless N Mini Pocket Router - 51 - 152-bit - You can enter 32 hexadecimal digits (any combination of 0-9, a-f, A-F, zero key is not promoted) or 16 ASCII characters. ) Note: If you do not set the key, the wireless security function is still disabled even if you have selected Shar...
Page 68 - Figure 4-27 Wireless Statistics
TL-WR710N 150Mbps Wireless N Mini Pocket Router - 54 - broadcast and multicast messages. When the Router has buffered broadcast or multicast messages for associated clients, it sends the next DTIM with a DTIM Interval value. You can specify the value between 1-255 Beacon Intervals. The default value...
Page 69 - This page will be refreshed automatically every 5 seconds.; Figure 4-29 DHCP Settings
TL-WR710N 150Mbps Wireless N Mini Pocket Router - 55 - You cannot change any of the values on this page. To update this page and to show the current connected wireless stations, click on the Refresh button. If the numbers of connected wireless stations go beyond one page, click the Next button to go...
Page 70 - Figure 4-30 DHCP Client List
TL-WR710N 150Mbps Wireless N Mini Pocket Router - 56 - ¾ Start IP Address - Specify an IP address for the DHCP Server to start with when assigning IP addresses. 192.168.0.100 is the default start address. ¾ End IP Address - Specify an IP address for the DHCP Server to end with when assigning IP addr...
Page 71 - Figure 4-31 Address Reservation
TL-WR710N 150Mbps Wireless N Mini Pocket Router - 57 - You cannot change any of the values on this page. To update this page and to show the current attached devices, click the Refresh button. 4.8.3 Address Reservation Choose menu “ DHCP → Address Reservation ”, and then you can view and add a reser...
Page 72 - Figure 4-33 The USB Settings menu
TL-WR710N 150Mbps Wireless N Mini Pocket Router - 58 - To modify or delete an existing entry: 1. Click the Modify in the entry you want to modify. If you want to delete the entry, click the Delete . 2. Modify the information. 3. Click the Save button. Click the Enable/Disable All button to make all ...
Page 73 - USB device, you need to click the; Rescan
TL-WR710N 150Mbps Wireless N Mini Pocket Router - 59 - ¾ Volume - The volume name of the USB drive the users have access to. Volume 1-8 is mapping to USB port1, and Volume 9-16 is mapping to USB port2. ¾ Capacity - The storage capacity of the USB driver. ¾ Used - The used space of the USB driver. ¾ ...
Page 74 - button first. Simply pulling USB drive out of the
TL-WR710N 150Mbps Wireless N Mini Pocket Router - 60 - 3. To unplug the USB drive, click Eject Disk button first. Simply pulling USB drive out of the USB port can cause damage to the device and loss of data. 4. Mounted volumes of each USB port are subject to the 8-volume limit. So you cannot access ...
Page 77 - Please restart the service for the new settings to take effect.; net use; Figure 4-42 The Forwarding menu
TL-WR710N 150Mbps Wireless N Mini Pocket Router - 63 - Figure 4-41 Add or Modify User Account ¾ User Name - Type the user name that you want to give access to the USB drive. The user name must be composed of alphanumeric symbols not exceeding 15 characters in length. ¾ Password - Enter the password ...
Page 79 - Figure 4-44 Add or Modify a Virtual Server Entry; service, and enter the same IP Address for that computer or server.; Security; ” page to be any other value except 80 such as 8080.
TL-WR710N 150Mbps Wireless N Mini Pocket Router - 65 - 4. Select the protocol used for this application, either TCP , UDP , or All . 5. Select the Enabled to enable the virtual server. 6. Click the Save button. Figure 4-44 Add or Modify a Virtual Server Entry ) Note: If your computer or server has m...
Page 81 - Figure 4-46 Add or Modify a Port Triggering Entry; connection of other hosts on LAN will be refused.
TL-WR710N 150Mbps Wireless N Mini Pocket Router - 67 - 4. Select the protocol used for Incoming Ports from the Incoming Protocol drop-down list, either TCP or UDP , or All . 5. Select Enabled in Status field. 6. Click the Save button to save the new rule. Figure 4-46 Add or Modify a Port Triggering ...
Page 83 - Figure 4-49 The Security menu
TL-WR710N 150Mbps Wireless N Mini Pocket Router - 69 - • Status - The status of the port is displayed here. “Enabled” means that the port is still active. Otherwise, the port is inactive. Click Refresh to update the Current UPnP Settings List. 4.11 Security Figure 4-49 The Security menu There are fo...
Page 85 - Dos Protection will take effect only when the; Traffic Statistics; in “; System Tool
TL-WR710N 150Mbps Wireless N Mini Pocket Router - 71 - Figure 4-51 Advanced Security ¾ Packets Statistics Interval (5~60) - The default value is 10. Select a value between 5 and 60 seconds from the drop-down list. The Packets Statistics Interval value indicates the time section of the packets statis...
Page 86 - Figure 4-52 Local Management
TL-WR710N 150Mbps Wireless N Mini Pocket Router - 72 - ¾ Enable TCP-SYN-FLOOD Attack Filtering - Enable or Disable the TCP-SYN-FLOOD Attack Filtering. ¾ TCP-SYN-FLOOD Packets Threshold (5~3600) - The default value is 50. Enter a value between 5 ~ 3600. When the current TCP-SYN-FLOOD Packets numbers ...
Page 87 - for more than 5 seconds to reset the Router to factory defaults.; Web Management Port
TL-WR710N 150Mbps Wireless N Mini Pocket Router - 73 - use the password to browse the built-in web pages to perform Administrator tasks while all the others will be blocked. After click the Add button, your PC's MAC Address will be placed in the list above. Click the Save button to save your setting...
Page 88 - Parental Control; Parental Control Settings
TL-WR710N 150Mbps Wireless N Mini Pocket Router - 74 - 4.12 Parental Control Choose menu “ Parental Control ”, and you can configure the parental control in the screen as shown in Figure 4-54. The Parental Control function can be used to control the internet activities of the child, limit the child ...
Page 89 - Add or Modify Parental Control Entry
TL-WR710N 150Mbps Wireless N Mini Pocket Router - 75 - 4. Enter the allowed domain name of the website, either the full name or the keywords (e.g. google) in the Allowed Domain Name field. Any domain name with keywords in it (e.g.
Page 90 - Access Control; Figure 4-57 The Access Control menu
TL-WR710N 150Mbps Wireless N Mini Pocket Router - 76 - 2. Click “ Access Restriction → Schedule ” on the left to enter the Schedule Settings page. Click Add New... button to create a new schedule with Schedule Description is Schedule_1, Day is Sat and Time is all day-24 hours. 3. Click “ Parental Co...
Page 91 - Figure 4-58 Access Control Rule Management
TL-WR710N 150Mbps Wireless N Mini Pocket Router - 77 - Figure 4-58 Access Control Rule Management ¾ Enable Internet Access Control - Select the check box to enable the Internet Access Restriction function, so the Default Filter Policy can take effect. ¾ Rule Name - Here displays the name of the rule...
Page 92 - Figure 4-59 Add or Modify Internet Access Restriction Entry
TL-WR710N 150Mbps Wireless N Mini Pocket Router - 78 - 6. In the Action field, select Deny or Allow . 7. In the Status field, select Enabled or Disabled to enable or disable your entry. 8. Click the Save button. Click the Enable All button to enable all the rules in the list. Click the Disable All b...
Page 93 - Figure 4-61 Host Settings
TL-WR710N 150Mbps Wireless N Mini Pocket Router - 79 - z In Rule Name field, create a name for the rule. Note that this name should be unique, for example Rule_1. z In Host field, select Host_1. z In Target field, select Target_1. z In Schedule field, select Schedule_1. z In Action field, select All...
Page 94 - Figure 4-62 Add or Modify a Host Entry
TL-WR710N 150Mbps Wireless N Mini Pocket Router - 80 - 2) In LAN IP Address field, enter the IP address. z If you select MAC Address, the screen shown is Figure 4-63. 1) In Host Description field, create a unique description for the host (e.g. Host_1). 2) In MAC Address field, enter the MAC address....
Page 95 - Figure 4-65 Target Settings
TL-WR710N 150Mbps Wireless N Mini Pocket Router - 81 - Figure 4-64 Host Settings 4.13.3 Target Choose menu “ Access Control → Target ”, you can view and set a Target list in the screen as shown in Figure 4-65. The target list is necessary for the Access Restriction Rule. Figure 4-65 Target Settings ...
Page 96 - Figure 4-66 Add or Modify an Access Target Entry
TL-WR710N 150Mbps Wireless N Mini Pocket Router - 82 - 2) In Domain Name field, enter the domain name, either the full name or the keywords (for example Google) in the blank. Any domain name with keywords in it
Page 97 - Figure 4-69 Schedule Settings
TL-WR710N 150Mbps Wireless N Mini Pocket Router - 83 - Then you will go back to the Target Settings page and see the following list, Figure 4-68 Target Settings 4.13.4 Schedule Choose menu “ Access Control → Schedule ”, you can view and set a Schedule list in the next screen as shown in Figure 4-69....
Page 98 - Figure 4-70 Advanced Schedule Settings
TL-WR710N 150Mbps Wireless N Mini Pocket Router - 84 - Click the Next button to go to the next page, or click the Previous button return to the previous page. Figure 4-70 Advanced Schedule Settings For example : If you desire to restrict the internet activities of host with MAC address 00-11-22-33-4...
Page 99 - Advanced Routing; Figure 4-72 The Advanced Routing Menu
TL-WR710N 150Mbps Wireless N Mini Pocket Router - 85 - 4.14 Advanced Routing Figure 4-72 The Advanced Routing Menu There are two submenus under the Network menu (shown in Figure 4-72): Static Routing List and System Routing Table . Click any of them, and you will be able to configure the correspondi...
Page 101 - Bandwidth Control; Figure 4-76 The Bandwidth Control menu
TL-WR710N 150Mbps Wireless N Mini Pocket Router - 87 - 4.15 Bandwidth Control Figure 4-76 The Bandwidth Control menu There are two submenus under the Bandwidth Control menu as shown in Figure 4-76. Click any of them, and you will be able to configure the corresponding function. The detailed explanat...
Page 102 - Figure 4-78 Bandwidth Control Rule List
TL-WR710N 150Mbps Wireless N Mini Pocket Router - 88 - Figure 4-78 Bandwidth Control Rule List ¾ Description - This is the information about the rules such as address range. ¾ Egress Bandwidth - This field displays the max and mix upload bandwidth through the WAN port, the default is 0. ¾ Ingress Ba...
Page 105 - interference to the IP & MAC Binding list.
TL-WR710N 150Mbps Wireless N Mini Pocket Router - 91 - Click the Enable All button to make all entries enabled. Click the Delete All button to delete all entries. 4.16.2 ARP List To manage the computer, you could observe the computers in the LAN by checking the relationship of MAC address and IP add...
Page 106 - DNS client service provider will give you a password or key.; Logout; button, then input your new username and password and click the; Login
TL-WR710N 150Mbps Wireless N Mini Pocket Router - 92 - dynamic IP address, and then your friends can connect to your server by entering your domain name no matter what your IP address is. Before using this feature, you need to sign up for DDNS service providers such as
Page 108 - Figure 4-88 The System Tools menu
TL-WR710N 150Mbps Wireless N Mini Pocket Router - 94 - Figure 4-87 Dyndns.org DDNS Settings To set up for DDNS, follow these instructions: 1. Type the User Name for your DDNS account. 2. Type the Password for your DDNS account. 3. Type the Domain Name you received from dynamic DNS service provider h...
Page 109 - The time will be lost if the router is turned off.
TL-WR710N 150Mbps Wireless N Mini Pocket Router - 95 - Statistics. Click any of them, and you will be able to configure the corresponding function. The detailed explanations for each submenu are provided below. 4.18.1 Time Settings You can set time manually or get GMT from the Internet for the route...
Page 112 - Set your IP address as static IP before upgrading.; File
TL-WR710N 150Mbps Wireless N Mini Pocket Router - 98 - ) Note: 1. When you upgrade the router's firmware, you will lose current configuration settings, so make sure you backup the router’s settings before you upgrade its firmware. 2. Make sure that your computer is connected to the Internet through ...
Page 113 - restoring process to prevent any damage.; Reboot
TL-WR710N 150Mbps Wireless N Mini Pocket Router - 99 - 4.18.5 Backup & Restore This page allows you to save current configuration of router as backup or restore the configuration file you saved before. Figure 4-94 Backup & Restore Configuration ¾ Click the Backup button to save all configura...
Page 114 - any spaces. Enter the new Password twice to confirm it.; Save
TL-WR710N 150Mbps Wireless N Mini Pocket Router - 100 - ¾ Web Service Port of the router. ¾ Upgrade the firmware of the router (system will reboot automatically). ¾ Restore the router's settings to factory default (system will reboot automatically). 4.18.7 Password This page allows you to change the...
Page 115 - Figure 4-97 System Log; Refresh; - Refresh the page to show the latest log list.; Save Log; - Click to save all the logs in a txt file.; Mail Log; of the last; Packets Statistic interval
TL-WR710N 150Mbps Wireless N Mini Pocket Router - 101 - Figure 4-97 System Log ¾ Refresh - Refresh the page to show the latest log list. ¾ Save Log - Click to save all the logs in a txt file. ¾ Mail Log - Click to send an email of current logs manually according to the address and validation informa...
Page 117 - Chapter 5. Configuration for Access Point Mode
TL-WR710N 150Mbps Wireless N Mini Pocket Router - 103 - Chapter 5. Configuration for Access Point Mode This chapter will show each Web page's key functions and the configuration way for Access Point Mode of TL-WR710N. 5.1 Login After your successful login, you can configure and manage the device. Th...
Page 118 - Figure 5-2 Status; Wired
TL-WR710N 150Mbps Wireless N Mini Pocket Router - 104 - Figure 5-2 Status ¾ Firmware Version - The version information of the Router’s firmware. ¾ Hardware Version - The version information of the Router’s hardware. ¾ Wired - This field displays the current settings or information for the LAN, you c...
Page 122 - Figure 5-5 Add A New Device
TL-WR710N 150Mbps Wireless N Mini Pocket Router - 108 - The WPS Configuration Screen of Wireless Adapter ) Note: In this example, the default PIN code of this adapter is 16952898 as the above figure shown. Step 2: Keep the WPS Status as Enabled and click the Add Device button in Figure 5-3. Step 3: ...
Page 123 - in the; Access Point PIN; The WPS Configuration Screen of Wireless Adapter
TL-WR710N 150Mbps Wireless N Mini Pocket Router - 109 - Step 2: For the configuration of the wireless adapter, please choose “ Enter the PIN of my access point or wireless router ” in the configuration utility of the WPS as below, and enter the PIN code of the AP into the field after “ Access Point ...
Page 124 - Figure 5-7 Wireless Working Mode Settings
TL-WR710N 150Mbps Wireless N Mini Pocket Router - 110 - 5.5 Working Mode The Router supports five operation mode types: Wireless Router , Access Point, Repeater, Client and Wireless Client Router . Please select one you want. Click Save to save your choice, which is shown as Figure 5-7. Figure 5-7 W...
Page 125 - to config IP address manually.; IP Address; - An address code that determines the size of the network. Normally; IGMP Proxy; Figure 5-10 Wireless menu
TL-WR710N 150Mbps Wireless N Mini Pocket Router - 111 - Figure 5-9 LAN ¾ MAC Address - The physical address of the LAN ports, as seen from the LAN. The value can not be changed. ¾ Type - Choosing Smart IP (DHCP) to get IP address from DHCP server, or choosing static IP to config IP address manually....
Page 128 - Figure 5-12 Wireless Security
TL-WR710N 150Mbps Wireless N Mini Pocket Router - 114 - Figure 5-12 Wireless Security ¾ Disable Security - The wireless security function can be enabled or disabled. If disabled, the wireless stations will be able to connect the Router without encryption. But it’s strongly recommended to choose one ...
Page 130 - Figure 5-14 Wireless MAC Filtering
TL-WR710N 150Mbps Wireless N Mini Pocket Router - 116 - 152-bit - You can enter 32 hexadecimal digits (any combination of 0-9, a-f, A-F, zero key is not promoted) or 16 ASCII characters. ) Note: If you do not set the key, the wireless security function is still disabled even if you have selected Sha...
Page 132 - Choose menu “; ”, and then you can configure the advanced; Fragmentation Threshold -; This value is the maximum size determining whether packets
TL-WR710N 150Mbps Wireless N Mini Pocket Router - 118 - 5.7.4 Wireless Advanced Choose menu “ Wireless → Wireless Advanced ”, and then you can configure the advanced settings of your wireless network. Figure 5-16 Wireless Advanced ¾ Transmit Power - Here you can specify the transmit power of Router....
Page 133 - Figure 5-17 Wireless Statistics
TL-WR710N 150Mbps Wireless N Mini Pocket Router - 119 - messages for associated clients, it sends the next DTIM with a DTIM Interval value. You can specify the value between 1-255 Beacon Intervals. The default value is 1, which indicates the DTIM Interval is the same as Beacon Interval. ¾ Enable WMM...
Page 134 - Figure 5-19 DHCP Settings
TL-WR710N 150Mbps Wireless N Mini Pocket Router - 120 - If the numbers of connected wireless stations go beyond one page, click the Next button to go to the next page and click the Previous button to return the previous page. ) Note: This page will be refreshed automatically every 5 seconds. 5.8 DHC...
Page 135 - When you choose the; Network; function will be disabled. You will see the page as below.
TL-WR710N 150Mbps Wireless N Mini Pocket Router - 121 - ¾ Start IP Address - Specify an IP address for the DHCP Server to start with when assigning IP addresses. 192.168.0.100 is the default start address. ¾ End IP Address - Specify an IP address for the DHCP Server to end with when assigning IP add...
Page 136 - Figure 5-21 DHCP Client List
TL-WR710N 150Mbps Wireless N Mini Pocket Router - 122 - Figure 5-21 DHCP Client List ¾ Client Name - The name of the DHCP client ¾ MAC Address - The MAC address of the DHCP client ¾ Assigned IP - The IP address that the Router has allocated to the DHCP client ¾ Lease Time - The time of the DHCP clie...
Page 137 - Figure 5-23 Add or Modify an Address Reservation Entry
TL-WR710N 150Mbps Wireless N Mini Pocket Router - 123 - 2. Enter the MAC address (in XX-XX-XX-XX-XX-XX format.) and IP address (in dotted-decimal notation) of the computer for which you want to reserve an IP address. 3. Click the Save button. Figure 5-23 Add or Modify an Address Reservation Entry To...
Page 143 - Windows logo; to open the Run dialog box and type; Figure 5-33 The System Tools menu
TL-WR710N 150Mbps Wireless N Mini Pocket Router - 129 - ¾ Storage Authority – Choose Read and Write or Read Only from the drop-down list to assign access authority of Storage Sharing to the user. ¾ Save - You can click the Save button to save your settings. ¾ Back - You can click the Back button to ...
Page 145 - function. Option “Tracert Hops” are used for; Tracert; Figure 5-36 Firmware Upgrade
TL-WR710N 150Mbps Wireless N Mini Pocket Router - 131 - The Diagnostic Results page displays the result of diagnosis. If the result is similar to the following screen, the connectivity of the Internet is fine. Figure 5-35 Diagnostic Results ) Note: Only one user can use this tool at one time. Option...
Page 146 - configuration, you can try to upgrade the firmware.; Figure 5-37 Restore Factory Default; All changed settings will be lost when defaults are restored.
TL-WR710N 150Mbps Wireless N Mini Pocket Router - 132 - ) Note: 1. New firmware versions ar
Page 147 - Figure 5-38 Backup & Restore Configuration; upgrading process to prevent any damage.; Figure 5-39 Reboot the Router
TL-WR710N 150Mbps Wireless N Mini Pocket Router - 133 - Figure 5-38 Backup & Restore Configuration ¾ Click the Backup button to save all configuration settings as a backup file in your local computer. ¾ To upgrade the Router's configuration, follow these instructions. • Click the Browse… button ...
Page 148 - Figure 5-40 Password; spaces. Enter the new Password twice to confirm.
TL-WR710N 150Mbps Wireless N Mini Pocket Router - 134 - 5.10.6 Password Choose menu “ System Tools → Password ”, and then you can change the factory default user name and password of the Router in the next screen as shown in Figure 5-40. Figure 5-40 Password It is strongly recommended that you shoul...
Page 149 - Figure 5-41 System Log
TL-WR710N 150Mbps Wireless N Mini Pocket Router - 135 - 5.10.7 System Log Choose menu “ System Tools → System Log ”, and then you can view the logs of the Router. Figure 5-41 System Log ¾ Refresh - Refresh the page to show the latest log list. ¾ Save Log - Click to save all the logs in a txt file. ¾...
Page 150 - Chapter 6. Configuration for Repeater Mode
TL-WR710N 150Mbps Wireless N Mini Pocket Router - 136 - Chapter 6. Configuration for Repeater Mode This chapter will show each Web page's key functions and the configuration way for Repeater Mode of TL-WR710N. 6.1 Login After your successful login, you can configure and manage the device. There are ...
Page 151 - Figure 6-2 Status
TL-WR710N 150Mbps Wireless N Mini Pocket Router - 137 - Figure 6-2 Status ¾ Firmware Version - The version information of the Router’s firmware. ¾ Hardware Version - The version information of the Router’s hardware. ¾ Wired - This field displays the current settings or information for the LAN, you c...
Page 152 - Figure 6-3 Working Mode
TL-WR710N 150Mbps Wireless N Mini Pocket Router - 138 - • Channel Width - The current wireless channel width in use. • MAC Address - The physical address of the Router, as seen from the WLAN. ¾ Traffic Statistics - The Router’s traffic statistics. • Received (Bytes) - Traffic that counted in bytes h...
Page 153 - Figure 6-4 the Network menu
TL-WR710N 150Mbps Wireless N Mini Pocket Router - 139 - ¾ WISP Client Router - In this mode, the device enables multiple users to share Internet connection from WISP. 6.5 Network Figure 6-4 the Network menu There is only one submenu under the Network menu (shown in Figure 6-4): LAN . 6.5.1 LAN Choos...
Page 154 - Figure 6-6 Wireless menu
TL-WR710N 150Mbps Wireless N Mini Pocket Router - 140 - 6.6 Wireless Figure 6-6 Wireless menu There are five submenus under the Wireless menu (shown in Figure 6-6): Wireless Settings , Wireless Security, MAC Filtering, Wireless Advanced and Wireless Statistics . Click it, and you will be able to con...
Page 156 - to wirelessly connect to the Router.; ”, and then you can configure the security; Figure 6-9 Wireless Security; It’s the WPA/WPA2 authentication type based on pre-shared; Version; default setting is; Automatic
TL-WR710N 150Mbps Wireless N Mini Pocket Router - 142 - 2. Failure to follow these guidelines can result in significant performance degradation or inability to wirelessly connect to the Router. 6.6.2 Wireless Security Choose menu “ Wireless → Wireless Security ”, and then you can configure the secur...
Page 158 - Figure 6-11 Wireless MAC Filtering
TL-WR710N 150Mbps Wireless N Mini Pocket Router - 144 - • WEP Key (Password) - Select which of the four keys will be used and enter the matching WEP key that you create. Make sure these values are identical on all wireless stations in your network. • Key Type - You can select the WEP key length (64-...
Page 159 - Figure 6-12 Add or Modify Wireless MAC Address Filtering entry
TL-WR710N 150Mbps Wireless N Mini Pocket Router - 145 - Figure 6-12 Add or Modify Wireless MAC Address Filtering entry To add or modify a MAC Address Filtering entry, follow these instructions: 1. Enter the appropriate MAC Address into the MAC Address field. The format of the MAC Address is XX-XX-XX...
Page 161 - Figure 6-14 Wireless Statistics
TL-WR710N 150Mbps Wireless N Mini Pocket Router - 147 - ¾ Fragmentation Threshold - This value is the maximum size determining whether packets will be fragmented. Setting the Fragmentation Threshold too low may result in poor network performance because of excessive packets. 2346 is the default sett...
Page 163 - Figure 6-16 DHCP Settings; Disable; LAN, the DHCP Server function
TL-WR710N 150Mbps Wireless N Mini Pocket Router - 149 - Figure 6-16 DHCP Settings ¾ DHCP Server - Enable or Disable the DHCP server. If you disable the Server, you must have another DHCP server within your network or else you must configure the computer manually. ¾ Start IP Address - Specify an IP a...
Page 164 - Figure 6-18 DHCP Client List
TL-WR710N 150Mbps Wireless N Mini Pocket Router - 150 - Figure 6-17 DHCP Settings 6.7.2 DHCP Client List Choose menu “ DHCP → DHCP Client List ”, and then you can view the information about the clients attached to the Router in the screen as shown in Figure 6-18. Figure 6-18 DHCP Client List ¾ Clien...
Page 165 - Figure 6-19 Address Reservation
TL-WR710N 150Mbps Wireless N Mini Pocket Router - 151 - Figure 6-19 Address Reservation ¾ MAC Address - The MAC address of the PC for which you want to reserve an IP address. ¾ Reserved IP Address - The IP address reserved for the PC by the Router. ¾ Status - The status of this entry either Enabled ...
Page 166 - Figure 6-21 The USB Settings menu
TL-WR710N 150Mbps Wireless N Mini Pocket Router - 152 - 6.8 USB Settings Figure 6-21 The USB Settings menu There are three submenus under the USB Settings menu (shown in Figure 6-21), Storage Sharing , Media Server and User Accounts . Click any of them, and you will be able to configure the correspo...
Page 172 - Figure 6-30 The System Tools menu
TL-WR710N 150Mbps Wireless N Mini Pocket Router - 158 - 6.9 System Tools Figure 6-30 The System Tools menu Choose menu “ System Tools ”, and then you can see the submenus under the main menu: Diagnostic , Firmware Upgrade , Factory Defaults, Backup & Restore, Reboot, Password, and System Log. Cl...
Page 174 - Figure 6-33 Firmware Upgrade
TL-WR710N 150Mbps Wireless N Mini Pocket Router - 160 - Figure 6-33 Firmware Upgrade ¾ Firmware Version - This displays the current firmware version. ¾ Hardware Version - This displays the current hardware version. The hardware version of the upgrade file must accord with the Router’s current hardwa...
Page 175 - Figure 6-34 Restore Factory Default; Figure 6-35 Backup & Restore Configuration
TL-WR710N 150Mbps Wireless N Mini Pocket Router - 161 - Figure 6-34 Restore Factory Default Click the Restore button to reset all configuration settings to their default values. ¾ The default User Name : admin ¾ The default Password : admin ¾ The default IP Address : 192.168.0.254 ¾ The default Subn...
Page 176 - Figure 6-36 Reboot the Router; Figure 6-37 Password
TL-WR710N 150Mbps Wireless N Mini Pocket Router - 162 - 6.9.5 Reboot Choose menu “ System Tools → Reboot ”, and then you can click the Reboot button to reboot the Router via the next screen. Figure 6-36 Reboot the Router Some settings of the Router will take effect only after rebooting, including: ¾...
Page 177 - Figure 6-38 System Log
TL-WR710N 150Mbps Wireless N Mini Pocket Router - 163 - ) Note: The new user name and password must not exceed 14 characters in length and not include any spaces. Enter the new Password twice to confirm. Click the Save button when finished. Click the Clear All button to clear all. 6.9.7 System Log C...
Page 178 - Chapter 7. Configuration for Client Mode
TL-WR710N 150Mbps Wireless N Mini Pocket Router - 164 - Chapter 7. Configuration for Client Mode This chapter will show each Web page's key functions and the configuration way for Client Mode of TL-WR710N. 7.1 Login After your successful login, you can configure and manage the device. There are main...
Page 179 - Figure 7-2 Status
TL-WR710N 150Mbps Wireless N Mini Pocket Router - 165 - Figure 7-2 Status ¾ Firmware Version - The version information of the Router’s firmware. ¾ Hardware Version - The version information of the Router’s hardware. ¾ Wired - This field displays the current settings or information for the LAN, you c...
Page 180 - Figure 7-3 Working Mode
TL-WR710N 150Mbps Wireless N Mini Pocket Router - 166 - • Channel Width - The current wireless channel width in use. • MAC Address - The physical address of the Router, as seen from the WLAN. ¾ Traffic Statistics - The Router’s traffic statistics. • Received (Bytes) - Traffic that counted in bytes h...
Page 181 - Figure 7-4 the Network menu
TL-WR710N 150Mbps Wireless N Mini Pocket Router - 167 - ¾ WISP Client Router - In this mode, the device enables multiple users to share Internet connection from WISP. 7.5 Network Figure 7-4 the Network menu There is only one submenu under the Network menu (shown in Figure 7-4): LAN . 7.5.1 LAN Choos...
Page 182 - When you choose the; Figure 7-6 Wireless menu
TL-WR710N 150Mbps Wireless N Mini Pocket Router - 168 - 3. When you choose the Smart IP (DHCP) mode, the DHCP Server function will be disabled. 7.6 Wireless Figure 7-6 Wireless menu There are two submenus under the Wireless menu (shown in Figure 7-6): Wireless Settings and Wireless Security . Click ...
Page 183 - The wireless radio of the AP can be enabled or disabled to allow or; Survey
TL-WR710N 150Mbps Wireless N Mini Pocket Router - 169 - ¾ Enable Wireless Radio - The wireless radio of the AP can be enabled or disabled to allow or deny wireless stations to access. If enabled, the wireless stations will be able to access the AP, otherwise, wireless stations will not be able to ac...
Page 184 - Figure 7-8 Wireless Security
TL-WR710N 150Mbps Wireless N Mini Pocket Router - 170 - Figure 7-8 Wireless Security ¾ Disable Security - The wireless security function can be enabled or disabled. If disabled, the wireless stations will be able to connect the Router without encryption. But it’s strongly recommended to choose one o...
Page 186 - Figure 7-11 DHCP Settings
TL-WR710N 150Mbps Wireless N Mini Pocket Router - 172 - 152-bit - You can enter 32 hexadecimal digits (any combination of 0-9, a-f, A-F, zero key is not promoted) or 16 ASCII characters. ) Note: If you do not set the key, the wireless security function is still disabled even if you have selected Sha...
Page 188 - Figure 7-13 DHCP Clients List
TL-WR710N 150Mbps Wireless N Mini Pocket Router - 174 - Figure 7-13 DHCP Clients List ¾ Client Name - The name of the DHCP client ¾ MAC Address - The MAC address of the DHCP client ¾ Assigned IP - The IP address that the Router has allocated to the DHCP client ¾ Lease Time - The time of the DHCP cli...
Page 189 - Figure 7-15 Add or Modify an Address Reservation Entry
TL-WR710N 150Mbps Wireless N Mini Pocket Router - 175 - 2. Enter the MAC address (in XX-XX-XX-XX-XX-XX format.) and IP address (in dotted-decimal notation) of the computer for which you want to reserve an IP address. 3. Click the Save button. Figure 7-15 Add or Modify an Address Reservation Entry To...
Page 195 - Figure 7-25 The System Tools menu
TL-WR710N 150Mbps Wireless N Mini Pocket Router - 181 - ¾ Save - You can click the Save button to save your settings. ¾ Back - You can click the Back button to discard the settings and just go to the media server configuration page. ) Note: Please restart the service for the new settings to take eff...
Page 197 - Figure 7-28 Firmware Upgrade
TL-WR710N 150Mbps Wireless N Mini Pocket Router - 183 - ¾ Traceroute Max TTL - The max number of hops for a Traceroute connection. The default is 20. Click Start to check the connectivity of the Internet. The Diagnostic Results page displays the result of diagnosis. If the result is similar to the f...
Page 198 - Figure 7-29 Restore Factory Default
TL-WR710N 150Mbps Wireless N Mini Pocket Router - 184 - 2. Type the path and file name of the update file into the File field, or click the Browse button to locate the update file. 3. Click the Upgrade button. ) Note: 1. New firmware versions ar
Page 199 - Figure 7-30 Backup & Restore Configuration; Figure 7-31 Reboot the Router
TL-WR710N 150Mbps Wireless N Mini Pocket Router - 185 - Figure 7-30 Backup & Restore Configuration ¾ Click the Backup button to save all configuration settings as a backup file in your local computer. ¾ To upgrade the Router's configuration, follow these instructions. • Click the Browse… button ...
Page 200 - Figure 7-32 Password
TL-WR710N 150Mbps Wireless N Mini Pocket Router - 186 - 7.9.6 Password Choose menu “ System Tools → Password ”, and then you can change the factory default user name and password of the Router in the next screen as shown in Figure 7-32. Figure 7-32 Password It is strongly recommended that you should...
Page 201 - Figure 7-33 System Log
TL-WR710N 150Mbps Wireless N Mini Pocket Router - 187 - 7.9.7 System Log Choose menu “ System Tools → System Log ”, and then you can view the logs of the Router. Figure 7-33 System Log ¾ Refresh - Refresh the page to show the latest log list. ¾ Save Log - Click to save all the logs in a txt file. ¾ ...
Page 202 - Chapter 8. Configuration for WISP Client Router Mode
TL-WR710N 150Mbps Wireless N Mini Pocket Router - 188 - Chapter 8. Configuration for WISP Client Router Mode This chapter will show each Web page's key functions and the configuration way for WISP Client Router Mode of TL-WR710N. 8.1 Login After your successful login, you can configure and manage th...
Page 203 - Figure 8-2 Status; The version information of the Router’s firmware.; LAN; them in the
TL-WR710N 150Mbps Wireless N Mini Pocket Router - 189 - Figure 8-2 Status ¾ Firmware Version - The version information of the Router’s firmware. ¾ Hardware Version - The version information of the Router’s hardware. ¾ LAN - This field displays the current settings or information for the LAN, you can...
Page 205 - Figure 8-3 Working Mode
TL-WR710N 150Mbps Wireless N Mini Pocket Router - 191 - • Subnet Mask - The subnet mask associated with the WAN IP Address. Click the Release to delete the network parameters, and click the Renew button to obtaining network parameters. ¾ Traffic Statistics - The Router’s traffic statistics. • Receiv...
Page 206 - Figure 8-4 The Network menu
TL-WR710N 150Mbps Wireless N Mini Pocket Router - 192 - ¾ WISP Client Router - In this mode, the device enables multiple users to share Internet connection from WISP. 8.5 Network Figure 8-4 The Network menu There are three submenus under the Network menu (shown in Figure 8-4): WAN , MAC Clone and LA...
Page 209 - the; Time-based Connecting
TL-WR710N 150Mbps Wireless N Mini Pocket Router - 195 - • Dynamic IP - You can check this radio button to use Dynamic IP as the secondary connection to connect to the local area network provided by ISP. • Static IP - You can check this radio button to use Static IP as the secondary connection to con...
Page 210 - Figure 8-8 PPPoE Advanced Settings
TL-WR710N 150Mbps Wireless N Mini Pocket Router - 196 - Figure 8-8 PPPoE Advanced Settings ¾ MTU Size - The default MTU size is “1480” bytes, which is usually fine. It is not recommended that you change the default MTU Size unless required by your ISP. ¾ Service Name/AC Name - The service name and A...
Page 215 - Figure 8-12 MAC Address Clone
TL-WR710N 150Mbps Wireless N Mini Pocket Router - 201 - Idle Time field. Otherwise, enter the number of minutes you want to have elapsed before your Internet connection terminates. ¾ Connect Automatically - Connect automatically after the Router is disconnected. To use this option, check the radio b...
Page 217 - Figure 8-14 Wireless menu; Wireless Settings; Wireless Statistics; Click; ”, and then you can configure the basic settings; Figure 8-15 Wireless Security
TL-WR710N 150Mbps Wireless N Mini Pocket Router - 203 - 8.6 Wireless Figure 8-14 Wireless menu There are five submenus under the Wireless menu (shown in Figure 8-14): Wireless Settings , Wireless Security, Wireless MAC Filtering, Wireless Advanced and Wireless Statistics . Click any of them, and you...
Page 220 - Figure 8-17 Wireless Security
TL-WR710N 150Mbps Wireless N Mini Pocket Router - 206 - 8.6.2 Wireless Security Figure 8-17 Wireless Security ¾ Disable Security - The wireless security function can be enabled or disabled. If disabled, the wireless stations will be able to connect the Router without encryption. But it’s strongly re...
Page 222 - Figure 8-19 Wireless MAC Filtering
TL-WR710N 150Mbps Wireless N Mini Pocket Router - 208 - 152-bit - You can enter 32 hexadecimal digits (any combination of 0-9, a-f, A-F, zero key is not promoted) or 16 ASCII characters. ) Note: If you do not set the key, the wireless security function is still disabled even if you have selected Sha...
Page 225 - Figure 8-23 Wireless Statistics
TL-WR710N 150Mbps Wireless N Mini Pocket Router - 211 - broadcast and multicast messages. When the Router has buffered broadcast or multicast messages for associated clients, it sends the next DTIM with a DTIM Interval value. You can specify the value between 1-255 Beacon Intervals. The default valu...
Page 226 - Figure 8-25 DHCP Settings
TL-WR710N 150Mbps Wireless N Mini Pocket Router - 212 - You cannot change any of the values on this page. To update this page and to show the current connected wireless stations, click on the Refresh button. If the numbers of connected wireless stations go beyond one page, click the Next button to g...
Page 227 - Figure 8-26 DHCP Client List
TL-WR710N 150Mbps Wireless N Mini Pocket Router - 213 - ¾ Start IP Address - Specify an IP address for the DHCP Server to start with when assigning IP addresses. 192.168.0.100 is the default start address. ¾ End IP Address - Specify an IP address for the DHCP Server to end with when assigning IP add...
Page 228 - Figure 8-27 Address Reservation
TL-WR710N 150Mbps Wireless N Mini Pocket Router - 214 - You cannot change any of the values on this page. To update this page and to show the current attached devices, click the Refresh button. 8.7.3 Address Reservation Choose menu “ DHCP → Address Reservation ”, and then you can view and add a rese...
Page 229 - Figure 8-29 The USB Settings menu
TL-WR710N 150Mbps Wireless N Mini Pocket Router - 215 - To modify or delete an existing entry: 1. Click the Modify in the entry you want to modify. If you want to delete the entry, click the Delete . 2. Modify the information. 3. Click the Save button. Click the Enable/Disable All button to make all...
Page 234 - Figure 8-38 The Forwarding menu
TL-WR710N 150Mbps Wireless N Mini Pocket Router - 220 - Figure 8-37 Add or Modify User Account ¾ User Name - Type the user name that you want to give access to the USB drive. The user name must be composed of alphanumeric symbols not exceeding 15 characters in length. ¾ Password - Enter the password...
Page 236 - Figure 8-40 Add or Modify a Virtual Server Entry
TL-WR710N 150Mbps Wireless N Mini Pocket Router - 222 - 4. Select the protocol used for this application, either TCP , UDP , or All . 5. Select the Enable to enable the virtual server. 6. Click the Save button. Figure 8-40 Add or Modify a Virtual Server Entry ) Note: If your computer or server has m...
Page 238 - Figure 8-42 Add or Modify a Port Triggering Entry
TL-WR710N 150Mbps Wireless N Mini Pocket Router - 224 - 4. Select the protocol used for Incoming Ports from the Incoming Protocol drop-down list, either TCP or UDP , or All . 5. Select Enable in Status field. 6. Click the Save button to save the new rule. Figure 8-42 Add or Modify a Port Triggering ...
Page 240 - Figure 8-45 The Security menu
TL-WR710N 150Mbps Wireless N Mini Pocket Router - 226 - • Status - The status of the port is displayed here. “Enabled” means that the port is still active. Otherwise, the port is inactive. Click Refresh to update the Current UPnP Settings List. 8.10 Security Figure 8-45 The Security menu There are f...
Page 243 - Figure 8-48 Local Management
TL-WR710N 150Mbps Wireless N Mini Pocket Router - 229 - ¾ Enable TCP-SYN-FLOOD Attack Filtering - Enable or Disable the TCP-SYN-FLOOD Attack Filtering. ¾ TCP-SYN-FLOOD Packets Threshold (5~3600) - The default value is 50. Enter a value between 5 ~ 3600. When the current TCP-SYN-FLOOD Packets numbers...
Page 245 - Parental Control
TL-WR710N 150Mbps Wireless N Mini Pocket Router - 231 - 8.11 Parental Control Choose menu “ Parental Control ”, and you can configure the parental control in the screen as shown in Figure 8-50. The Parental Control function can be used to control the internet activities of the child, limit the child...
Page 247 - Access Control; Figure 8-53 The Access Control menu
TL-WR710N 150Mbps Wireless N Mini Pocket Router - 233 - 2. Click “ Access Restriction → Schedule ” on the left to enter the Schedule Settings page. Click Add New... button to create a new schedule with Schedule Description is Schedule_1, Day is Sat and Time is all day-24 hours. 3. Click “ Parental C...
Page 248 - Figure 8-54 Access Control Rule Management
TL-WR710N 150Mbps Wireless N Mini Pocket Router - 234 - Figure 8-54 Access Control Rule Management ¾ Enable Internet Access Restriction - Select the check box to enable the Internet Access Restriction function, so the Default Filter Policy can take effect. ¾ Rule Name - Here displays the name of the...
Page 249 - Figure 8-55 Add or Modify Internet Access Restriction Entry
TL-WR710N 150Mbps Wireless N Mini Pocket Router - 235 - 6. In the Action field, select Deny or Allow . 7. In the Status field, select Enabled or Disabled to enable or disable your entry. 8. Click the Save button. Click the Enable All button to enable all the rules in the list. Click the Disable All ...
Page 250 - Figure 8-57 Host Settings
TL-WR710N 150Mbps Wireless N Mini Pocket Router - 236 - z In Rule Name field, create a name for the rule. Note that this name should be unique, for example Rule_1. z In Host field, select Host_1. z In Target field, select Target_1. z In Schedule field, select Schedule_1. z In Action field, select Al...
Page 251 - Figure 8-58 Add or Modify a Host Entry
TL-WR710N 150Mbps Wireless N Mini Pocket Router - 237 - 2) In LAN IP Address field, enter the IP address. z If you select MAC Address, the screen shown is Figure 8-59. 1) In Host Description field, create a unique description for the host (e.g. Host_1). 2) In MAC Address field, enter the MAC address...
Page 252 - Figure 8-61 Target Settings
TL-WR710N 150Mbps Wireless N Mini Pocket Router - 238 - Figure 8-60 Host Settings 8.12.3 Target Choose menu “ Access Control → Target ”, you can view and set a Target list in the screen as shown in Figure 4-65. The target list is necessary for the Access Restriction Rule. Figure 8-61 Target Settings...
Page 253 - Figure 8-62 Add or Modify an Access Target Entry
TL-WR710N 150Mbps Wireless N Mini Pocket Router - 239 - 2) In Domain Name field, enter the domain name, either the full name or the keywords (for example Google) in the blank. Any domain name with keywords in it
Page 254 - Figure 8-65 Schedule Settings
TL-WR710N 150Mbps Wireless N Mini Pocket Router - 240 - Then you will go back to the Target Settings page and see the following list, Figure 8-64 Target Settings 8.12.4 Schedule Choose menu “ Access Control → Schedule ”, you can view and set a Schedule list in the next screen as shown in Figure 8-65...
Page 255 - Figure 8-66 Advanced Schedule Settings
TL-WR710N 150Mbps Wireless N Mini Pocket Router - 241 - Click the Next button to go to the next page, or click the Previous button return to the previous page. Figure 8-66 Advanced Schedule Settings For example : If you desire to restrict the internet activities of host with MAC address 00-11-22-33-...
Page 256 - Advanced Routing; Figure 8-68 The Advanced Routing Menu
TL-WR710N 150Mbps Wireless N Mini Pocket Router - 242 - 8.13 Advanced Routing Figure 8-68 The Advanced Routing Menu There are two submenus under the Network menu (shown in Figure 4-72): Static Routing List and System Routing Table . Click any of them, and you will be able to configure the correspond...
Page 258 - Bandwidth Control; Figure 8-72 The Bandwidth Control menu
TL-WR710N 150Mbps Wireless N Mini Pocket Router - 244 - 8.14 Bandwidth Control Figure 8-72 The Bandwidth Control menu There are two submenus under the Bandwidth Control menu as shown in Figure 8-72. Click any of them, and you will be able to configure the corresponding function. The detailed explana...
Page 259 - Figure 8-74 Bandwidth Control Rule List
TL-WR710N 150Mbps Wireless N Mini Pocket Router - 245 - Figure 8-74 Bandwidth Control Rule List ¾ Description - This is the information about the rules such as address range. ¾ Egress Bandwidth - This field displays the max and mix upload bandwidth through the WAN port, the default is 0. ¾ Ingress B...
Page 265 - Figure 8-84 The System Tools menu
TL-WR710N 150Mbps Wireless N Mini Pocket Router - 251 - Figure 8-83 Dyndns.org DDNS Settings To set up for DDNS, follow these instructions: 1. Type the User Name for your DDNS account. 2. Type the Password for your DDNS account. 3. Type the Domain Name you received from dynamic DNS service provider ...
Page 271 - Figure 8-92 Password; button when finished.; Clear All; button to clear all.
TL-WR710N 150Mbps Wireless N Mini Pocket Router - 257 - ¾ Upgrade the firmware of the router (system will reboot automatically). ¾ Restore the router's settings to factory default (system will reboot automatically). 8.17.7 Password This page allows you to change the factory default user name and pas...
Page 272 - This page allows you to query the logs of the router.
TL-WR710N 150Mbps Wireless N Mini Pocket Router - 258 - 8.17.8 System Log This page allows you to query the logs of the router. Figure 8-93 System Log ¾ Refresh - Refresh the page to show the latest log list. ¾ Save Log - Click to save all the logs in a txt file. ¾ Mail Log - Click to send an email ...
Page 276 - Figure A-4 Virtual Servers; Forwarding; ” menu on the left; DMZ; radio
TL-WR710N 150Mbps Wireless N Mini Pocket Router - 262 - Figure A-4 Virtual Servers Figure A-5 Add or Modify a Virtual server Entry ) Note: Your opposite side should call your WAN IP, which is displayed on the “Status” page. 4) How to enable DMZ Host: Log in to the Router, click the “ Forwarding ” me...
Page 278 - Figure A-9 Add or Modify a Virtual server Entry; The wireless stations cannot connect to the Router.; of your wireless stations.
TL-WR710N 150Mbps Wireless N Mini Pocket Router - 264 - Figure A-9 Add or Modify a Virtual server Entry 5. The wireless stations cannot connect to the Router. 1) Make sure the " Enable Wireless Router Radio " is checked. 2) Make sure that the wireless stations' SSID accord with the Router's ...
Page 279 - Appendix B: Configuring the PC; Start; button, and then click; Control Panel; Network and Internet Connections; icon, and then click on the; tab in the appearing window.
TL-WR710N 150Mbps Wireless N Mini Pocket Router - 265 - Appendix B: Configuring the PC In this section, we’ll introduce how to install and configure the TCP/IP correctly in Windows XP. First make sure your Ethernet Adapter is working, refer to the adapter’s manual if necessary. 1. Configure TCP/IP c...
Page 280 - following; tab is open on
TL-WR710N 150Mbps Wireless N Mini Pocket Router - 266 - Figure B-0-2 5) The following TCP/IP Properties window will display and the IP Address tab is open on this window by default. 6) Select Obtain an IP address automatically, Choose Obtain DNS server automatically, as shown in the Figure below:
Page 281 - to keep your settings.
TL-WR710N 150Mbps Wireless N Mini Pocket Router - 267 - Figure B-0-3 ) Note: For Windows 98 OS or before, the PC and Router may need to be restarted. 7) Click OK to keep your settings.
Page 282 - Appendix C: Specifications; General
TL-WR710N 150Mbps Wireless N Mini Pocket Router - 268 - Appendix C: Specifications General Standards IEEE 802.11n, 802.11b, 802.11g Protocols TCP/IP, PPPoE, DHCP, ICMP, NAT, SNTP Port One 10/100Mbps LAN/WAN port One 10/100Mbps LAN port 10BASE-T: UTP category 3, 4, 5 cable (maximum 100m) EIA/TIA-568 ...
Page 283 - Appendix D: Glossary
TL-WR710N 150Mbps Wireless N Mini Pocket Router - 269 - Appendix D: Glossary ¾ 802.11n - 802.11n builds upon previous 802.11 standards by adding MIMO (multiple-input multiple-output). MIMO uses multiple transmitter and receiver antennas to allow for increased data throughput via spatial multiplexing...
TP-Link td-w8970
Manual
TP-Link TL-WA750RE
Manual
TP-Link TL-R460
Manual
TP-Link TL-WN822N
Manual
TP-Link TD-8810
Manual
TP-Link TL-WN7200N
Manual
TP-Link TL-ER5120
Manual
TP-Link TL-ER6020
Manual
TP-Link H.264 Megapixel Surveillance Camera
Manual
TP-Link TL-R470t+
Manual
TP-Link TL-SG3424
Manual
TP-Link TL-SC2020N
Manual
TP-Link TL-PA411
Manual
TP-Link TL-WR543G
Manual
TP-Link TL-WN827N
Manual
TP-Link TL-WR700N
Manual
TP-Link Archer T2UH
Manual
TP-Link TL-SL1226
Manual
TP-Link TL-R402M
Manual
TP-Link TL-SG2452
Manual