TP-Link TL-WA601G - Manuals

Package Contents The following items should be found in your package: ¾ One TL-WA601G 108Mbps Wireless Access Point ¾ One AC power Adapter for TL-WA601G 108Mbps Wireless Access Point ¾ One Resource CD , including: z This User Guide z Other Helpful Information ) Note: Make sure that the package conta...

TL-WA601G 108M Wireless Access Point User Guide Chapter 1 Introduction Thank you for choosing the TL-WA601G 108Mbps Wireless Access Point. 1.1 Product Overview This AP provides smooth connectivity between Ethernet wired networks and radio-equipped wireless devices. It adopts 108M Super G ™ WLAN Tran...

TL-WA601G 108M Wireless Access Point User Guide 1.3 Conventions The AP or TL-WA601G, or device mentioned in this User guide stands for TL-WA601G 108M Wireless Access Point without any explanations. Parameters provided in the pictures are just references for setting up the product, which may differ f...

TL-WA601G 108M Wireless Access Point User Guide 2.2 The Back Panel Figure 2-2 ¾ Wireless antenna ¾ Factory Default Reset button ¾ There are three ways to reset the AP's factory defaults: • Use the Factory Defaults function on System Tools -> Factory Defaults page in the AP's Web-based Utility. • ...

TL-WA601G 108M Wireless Access Point User Guide ¾ Not cluttered or crowded. There should be at least 2 inches (5 cm) of clear space on all sides of the AP ¾ Well ventilated (especially if it is in a closet) ¾ Operating temperature: 0 ℃ ~40 ℃ (32 ℉ ~104 ℉ ) ¾ Operating Humidity: 10%~90%RH, Non-conden...

TL-WA601G 108M Wireless Access Point User Guide 1) Open TCP/IP Properties of the LAN card in your PC, enter the IP address as 192.168.1.* (* is any value between 2 to 254, Subnet mask is 255.255.255.0, Gateway is 192.168.1.1, DNS address is the value provided by ISP). 2) Now, you can run the Ping co...

TL-WA601G 108M Wireless Access Point User Guide Chapter 3 Software Configuration This User Guide recommends using the “Quick Installation Guide” for first-time installation. For advanced users, if you want to know more about this device and make use of its functions adequately, you need to read this...

TL-WA601G 108M Wireless Access Point User Guide There are the detailed explanations for each web page's key functions below. 3.2 Status The Status page displays the AP's current status and configuration. All information is read-only. ¾ Wired - This field displays the current settings or information ...

TL-WA601G 108M Wireless Access Point User Guide ) Note: Limited by local law regulations, version for North America does not have region selection option. The wireless basic settings for this version are shown below. ) Note: To apply any settings you have altered on the page, please click the Save b...

TL-WA601G 108M Wireless Access Point User Guide Figure 3-7 Wireless Mode Settings 14

TL-WA601G 108M Wireless Access Point User Guide Figure 3-8 Wireless repeating 2. Verify the wireless security parameters for all access points, if any. 3. Verify connectivity across the LANs. A computer on any LAN segment should be able to connect to the Internet or share files and printers with any...

TL-WA601G 108M Wireless Access Point User Guide • Both use the same Channel and security settings if security is in use. • Verify connectivity across the LAN 1 and LAN 2. A computer on either LAN segment should be able to connect to the Internet or share files and printers of any other PCs or server...

TL-WA601G 108M Wireless Access Point User Guide 3.4.4 Security Settings You can select one of the following security options: Figure 3-12 Wireless Securities ¾ Disable Security - The wireless security function can be enabled or disabled. If disabled, the wireless stations will be able to connect the...

TL-WA601G 108M Wireless Access Point User Guide 2) WPA-PSK - Pre-shared key of WPA. 3) WPA2-PSK - Pre-shared key of WPA2. • PSK Passphrase - You can enter a passphrase between 8 and 63 characters long. • Group Key Update Period - Specify the group key update interval in seconds. The value can be eit...

TL-WA601G 108M Wireless Access Point User Guide ¾ Assigned IP Address - The IP address of the AP reserved. To Reserve IP addresses: 1. Click the Add New... button to add a new Address Reservation entry. 2. Enter the MAC address (The format for the MAC Address is XX-XX-XX-XX-XX-XX.) and IP address in...

TL-WA601G 108M Wireless Access Point User Guide ¾ RTS threshold - RTS/CTS Threshold, the packet size that is used to determine if RTS/CTS should be sent. ¾ Fragmentation threshold - The maximum packet size used for fragmentation. ¾ Beacon Interval - The interval time between two successive beacons. ...

TL-WA601G 108M Wireless Access Point User Guide Figure 3-27 System Log The AP can keep logs of all traffic. You can query the logs to find what happened to the AP. Click the Refresh button to refresh the logs. Click the Clear ALL button to clear all the logs. 32

TL-WA601G 108M Wireless Access Point User Guide Appendix A: Glossary 108M Super G ™ WLAN Transmission Technology - 108M Super G ™ WLAN Transmission Technology employs multiple performance-enhancing techniques including packet bursting, fast frames, data compression, and dynamic turbo mode that combi...

TL-WA601G 108M Wireless Access Point User Guide Appendix B: Specifications General Standards and Protocols IEEE 802.3, 802.3u, 802.11b and 802.11g, TCP/IP, DHCP Safety & Emission FCC 、 CE Ports One 10/100M Auto-Negotiation LAN RJ45 port supporting Auto MDI/MDIX Cabling Type 10BASE-T: UTP categor...

TL-WA601G 108M Wireless Access Point User Guide Appendix C: FAQ 1. No lights are lit on the access point. It takes a few seconds for the power indicator to light up. Wait a minute and check the power light status on the access point if the access point has no power. 1) Make sure the power cord is co...