TP-Link TL-SC3430N - Manuals

ii Europe – EU Declaration of Conformity.........................................................................89 Federal Communication Commission Interference Statement ....................................92

1 Package Contents The following items should be found in your package: ¾ TL-SC3430N Wireless N H.264 Megapixel Surveillance Camera ¾ Power Adapter ¾ Mounting Bracket with three screws, a Lock Ring, a Brace and a Base Plate ¾ RJ45 Cable ¾ Quick Installation Guide ¾ Resource CD, including: z This Use...

2 Chapter 1 Safety Instructions ¾ Before you use this product This product has been designed with safety in mind. However, the electrical products can cause fires which may lead to serious body injury if not used properly. To avoid such accidents, be sure to heed the following. ¾ Legal Caution Video...

3 Chapter 2 Minimum System Requirement & Product Feature 2.1 System Requirement For normal operation and viewing of the network camera, it’s recommended that your system meets these minimum requirements for proper operation: Item Requirements CPU Pentium 4 2.8GHz (or equivalent AMD) Graphic Card...

4 Audio compression: G.711 μ law, a law, and AMR Mobile Phone Live View Through 2.5 WAP, 3GPP, 3G Streaming, and 3G Browser Alarm Sending FTP Client / SMTP / Network Storage / Memory Card / HTTP event Security Passward Protecton / HTTPS encryption / IP Filter Alarm Buffer Recording image and audio f...

6 Step 1. Press the WPS button on the router supporting WPS for 2 seconds. Step 2 . Press the WPS button on the Camera within 2 minutes. ¾ Lock Ring : It is used to adjust the angle of the Camera. ¾ Base Plate : It is used to support the Camera and can be fixed to a flat surface with the supplied sc...

7 (2) Wall Mount 2.5 Hardware Connection Before proceeding, confirm that your PC is connected to your router and can access the Internet. Make sure that your router’s DHCP feature is enabled. If not, please refer to your router’s instruction to enable it. For TL-SC3430N, if your router supports WPS ...

9 Chapter 3 Using IP Camera via Web Browser 3.1 Obtain the IP Address 1. Insert the provided CD into your CD-ROM driver. The Setup Wizard will automatically pop up on your computer’s screen as shown in the figure below. Figure 3-1 2. Choose the Intelligent IP Installer , and then the next screen app...

10 3. After the installation is finished, click Start > All Programs > TP-LINK >Intelligent IP Installer to start using the program. Figure 3-3 4. The following screen will then display. Click the Search button to search Network Cameras in the network; it displays Network Cameras informatio...

11 3.2 Windows Web Browser .2 Windows Web Browser The configuration of browser is similar in Windows XP/Vista/7. Here we take IE browser in Windows XP for example. The configuration of browser is similar in Windows XP/Vista/7. Here we take IE browser in Windows XP for example. 1 Click Link to IE but...

12 3.3 Mac Web Browser .3 Mac Web Browser 1 Click the Safari icon. 1 Click the Safari icon. 2 After the home page appears, click Bookmarks and then choose Show All Bookmarks .

13 3 Click Bonjour on the left of the following screen. Double click the Mac address of the Camera in the bookmark list. For example, TP-LINK-001BFE0334A2 . 4 Enter the default Name admin and default Password admin . Click Log In . ) Note: The default user name “admin” and the password “admin”are se...

14 5 The monitor image will be displayed in your browser. In the far left side of main configuration are Setting, Client Setting and Image Setup .

15 Chapter 4 Operating IP Camera via Mobile Phone 4.1 Mobile Phone Viewing 4.1.1 3G Mobile Phone Streaming Viewing For 3G mobile phone viewing, type “ rtsp://<IP>:<PORT>/video.3gp ” into your 3G Streaming Link. <IP> is the Public IP address of your IP Camera; <PORT> is the RT...

16 4. The TP-LINK User Interface and live image will show up in the middle of the screen. 3. Enter name and password. Default values are both admin. Then click Log in ) Note: It will show continuous snapshots not a real time video streaming. Therefore, the recording feature is disabled.

17 Chapter 5 Configuration of Main Menu In the left side of main configuration are Setting, Client setting and Image setting . In the right side, you can control Live View in your main Browser. The functions include: Snapshot, Open digital zoom, Audio, and Video Play . Video Play Audio Play Open dig...

18 5.1.2 Digital zoom in / out the image via the monitor window • Click to display the digital zoom in window. • Pull the to adjust the digital zoom range, and it will be showed on the above window. • Use the left click of your mouse to move to anywhere in the window area. 5.1.3 Video play buttons S...

21 Chapter 6 Setting-Basic Click the Basic folder to display the sub folders including System , Camera , Network , and Security . 6.1 System Click the folder of System to display the sub-folders including Information, Date / Time, Initialize, and Language. 6.1.1 Information The Information screen pr...

22 6.1.2 Date / Time The Date/ Time screen displays all options of time setting. ¾ Current Date / Time: This displays the current date and time of this IP Camera. ¾ PC Clock: This displays the date and time of the monitoring PC clock. ¾ Date / Time Format: You can click the pull down box to select d...

24 6.1.4 Language ¾ Upload Language Pack : Clicking “Browse” and selecting the file for updating, the present language display of WEB User Interface could be changed. A confirmation dialogue will appear. Click “OK”, then the update will be applied immediately. The default language is “English”. 6.2 ...

26 ¾ Text Overlay: Some information can be showed on the display screen, such as Date / Time and user-defined text. And the background color can be chosen. ¾ Privacy Mask: A specific area of the video image can be covered. 6.2.2 Stream 1 ¾ Viewer Authentication: z On : If the viewer authentication i...

27 20, 25, and 30 fps. The unit “fps” stands for “frames per second”. ) Note: The frame rate is up to 15 fps at 1280x1024, and up to 30 fps at 640x480. However, if you would like choose frame rate over 15 fps, the IMAGE SIZE of H.264/MPEG-4/MJPEG setting page has to been selected 320x240 or 640x480 ...

30 z Video / Audio Port: Specify the transmission port number of the video data, from 1124 to 65534. z Time-To-Live: Set the maximum TTL that multicast can pass through. ) Note: Time-To-Live option determines the maximum length of time (measure as the number of network routers that can be passed bef...

34 6.3.1 Information Display the MAC address of the device. ¾ Obtain an IP address automatically (DHCP) : If a DHCP server is installed on the network, to select this while the IP address is assigned by the DHCP server. ¾ Obtain DNS server address automatically : Select this to obtain the address of...

37 Point-to-Point Protocol frames insider Ethernet frames. PPPoE connection is used mainly with ADSL service where individual users connect to the ADSL transceiver (modem) over Ethernet work. It also widely used in XDSL (digital affiliate line such as ADSL, VDSL or SDSL) 2) The IP Camera needs to be...

38 2. Input all information and follow step by step with DynDNS. 3. Login with new account and click Account → My Hosts → Add Host Services.

39 4. Type domain in the Hostname field and select sub-domain. 5. After typing information, check your DDNS service

40 6. Type your DDNS User ID, Password and Host name in Setting → Network → DDNS . After completing setting, reboot IP Camera. 6.3.4 UPnP (Universal Plug and Play) If you have a Router to access to internet and the Router supports UPnP IGD function, you need to turn on the UPnP Port Forwarding funct...

41 ¾ HTTP Port : Enter the HTTP port number and default HTTP port is 80. ¾ SSL Port: Enter the SSL port number and default SSL port is 443. ¾ RTSP Port: Enter the RTSP port, default value is 554 for computer view. ) Note: UPnP (Universal Plug and Play): UPnP is a set of computer network protocol. It...

46 9 Obtain an IP address automatically (DHCP) – If a DHCP server is installed and enabled on the network, to select this for the IP address can be assigned by the DHCP server. 9 Use the following IP address - Select this when the fixed IP address is set. — IP address : Enter the IP address of the C...

47 2. Secondly, open the router’s Web-based Utility and click QSS link on the left of the main menu. Then the following screen will appear. Click Add device . And then select Enter the new device’s PIN and enter the PIN value of the Camera, click Connect .

50 ) Note: When enable HTTPS with RTSP on mode, the IP Camera only protect the setting such as username and password and do not protect video and audio. When enable HTTPS with RTSP off mode, the IP Camera will protect all setting including video and audio. 6.4.3 IP Filter IP Filter provides the func...

51 Chapter 7 Setting-Advanced Click the folder of Advanced to display the sub folders including FTP client, SMTP, Network storage, Memory Card, HTTP event, Schedule, Alarm buffer, Motion detection, Audio detection , and System Log . 7.1 FTP Client Use this menu to set up for capturing and sending an...

55 number is added to the file name. z Sequence number : A consecutive number is added to the Image file name. z Sequence number clear : Click Clear and the suffix of the sequence number returns to 1. ¾ Interval : Set the periodical sending is effective interval. Min value is 1 min and Max value is ...

59 ¾ Image File Name : Type the file name of the image sent by SMTP up to 10 alphanumeric characters, - (hyphen) and _ (under score). ¾ Suffix : Select a suffix to be added to the file name sent by SMTP. z Date & time : The date & time suffix is added to the Image file name. The date & t...

60 7.3.1 General Select On if you would like to use the network storage function. Then choose one protocol between Windows network (SMB/CIFS) and Unix network (NFS). ¾ Protocol- Unix Network (NFS): z Network storage location: Type the IP or name of specified computer and folder. For example, //IP/fo...

69 ¾ FTP server shutdown : Backup files to memory card when FTP server is shut down. ¾ Network storage shutdown : Backup images to memory card when network storage is shut down. 7.5 HTTP event Use this menu to set up for capturing and sending images to an HTTP server. By using HTTP client function, ...

70 7.5.1 General Select On when you use the HTTP function. The common setting options are displayed below. Select Off, if you do not wish to use the HTTP function. ¾ HTTP event : Set up the HTTP server URL, port, User ID, Password and Proxy Server settings. For example: URL: 192.168.1.107/cgi-bin/op...

72 ) Note: You can set motion detection on motion detection page . (Please go to “ Setting → Advanced → Motion detection → Setting ”) Motion Detection works only when the MPEG4 function is On.

73 z Parameter : the parameter of CGI (defined in Setting → Advanced → HTTP event → General → URL ) is from your target device. For example, move=down. z Message : message will show up in the form of Message = PTZ down. If your target device didn’t support the parameter of message, you can’t see the...

74 z Parameter : the parameter of CGI (defined in Setting → Advanced → HTTP event → General → URL ) is from your target device. For example, move=down. z Message : message will show up in the form of Message = PTZ down. If your target device didn’t support the parameter of message, you can’t see the...

77 Click it on for using Audio Detection function as a sensor. You can set audio detection function at the audio detection function screen. ¾ Threshold : It means the extent which the alarm will be triggered. The default value is 50 and the value range is 0~100. The larger the value, the higher the ...

78 ¾ Enable Remote Log : Enables user to send the log data to a specified log server.

79 Appendix A. Frame-rate and Bitrate Table – Help to set IP Camera with your network environment to access Internet. Base on your network upload environment to choose the suitable Image-Quality setting. For example, if the network environment is ADSL 256Kb (upload) / 2Mb (download), the most fluent...

84 B. Storage Requirement Table - Help to set Recording Storage System. Please refer to the following table to find out the capability for recording into your hard disk. B.1 Mega Mode B.1.1 H.264 Storage Requirement GB / channel / day @ 15fps Quality 1280*1024 1280*720 640*480 320*240 Excellent 50 4...

87 640*480 2048 15 2200 182.6 640*480 512 30 550 45.7 640*480 512 15 550 45.7 320*240 6144 30 5100 423.3 320*240 6144 15 2800 232.4 320*240 2048 30 2200 182.6 320*240 2048 15 2200 182.6 320*240 512 30 550 45.7 320*240 512 15 550 45.7 C. System Requirement – Help to setup System C.1. 16 Channel IP Ca...

89 Europe – EU Declaration of Conformity This device complies with the essential requirements of the R&TTE Directive 1999/5/EC. The following test methods have been applied in order to prove presumption of conformity with the essential requirements of the R&TTE Directive 1999/5/EC: Clause De...

92 Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential i...