TP-Link TL-PS110P - Manuals

Page 2 - COPYRIGHT & TRADEMARKS; Specifications are subject to change without notice.

I COPYRIGHT & TRADEMARKS Specifications are subject to change without notice. is a registered trademark of TP-LINK TECHNOLOGIES CO., LTD. Other brands and product names are trademarks or registered trademarks of their respective holders. No part of the specifications may be reproduced in any for...

Page 3 - FCC STATEMENT; Reorient or relocate the receiving antenna.; Trademarks

II FCC STATEMENT This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, use...

Page 4 - FCC RF Radiation Exposure Statement; conjunction with any other antenna or transmitter.”; CE Mark Warning; National Restrictions

III FCC RF Radiation Exposure Statement This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This device and its antenna must not be co-located or operating in conjunction with any other antenna or transmitter. “To comply with FCC RF exposure compl...

Page 5 - CONTENTS

IV CONTENTS Chapter 1. Introduction ......................................................................................... 1 1.1 Product Overview ...................................................................................................... 1 1.2 Components and Features .....................

Page 7 - Single Parallel Port Fast Ethernet Print Server; Chapter 1. Introduction; Product Overview; Dongle-sized Wireless Print Server; The; Status; LED should be flash; five; times when POST. If not, please contact your local dealer for; Factory Defaults; The TL-PS110P is produced without password by default.

TL-PS110P Single Parallel Port Fast Ethernet Print Server 1 Chapter 1. Introduction 1.1 Product Overview The external print servers enhance capability by letting you place your printers at convenient locations directly on the Ethernet network, and by increasing network printer performance and manage...

Page 8 - Chapter 2. Hardware Installation; Before you start, you should prepare the following items:

TL-PS110P Single Parallel Port Fast Ethernet Print Server 2 Chapter 2. Hardware Installation 2.1 Preparation Before you start, you should prepare the following items: ¾ One printer with a Parallel port ¾ One printer cable ¾ One Router 2.2 Connection Follow the instructions below to connect the print...

Page 9 - Chapter 3. How to Configure the Print Server; and Windows 7 are similar. Here take Windows XP for example.; Run as administrator; by

TL-PS110P Single Parallel Port Fast Ethernet Print Server 3 Chapter 3. How to Configure the Print Server 3.1 Using PSWizard in Windows XP/ Windows Vista/ Windows 7 To connect to the print server using PSWizard, the configuration for Windows XP, Windows Vista and Windows 7 are similar. Here take Wind...

Page 10 - Then you will enter to the “; Welcome; ” screen as shown in Figure 3-4, select the print server that; Next

TL-PS110P Single Parallel Port Fast Ethernet Print Server 4 3. Then you will enter to the “ Welcome ” page as shown in Figure 3-3. Click Next . Figure 3-3 4. From the “ Select A Print Server ” screen as shown in Figure 3-4, select the print server that you want to configure and click Next . Figure 3...

Page 12 - Confirm your settings on the screen in Figure 3-7. Click; and your changes will be saved

TL-PS110P Single Parallel Port Fast Ethernet Print Server 6 Figure 3-6 7. Confirm your settings on the screen in Figure 3-7. Click Next and your changes will be saved as shown in Figure 3-8. Figure 3-7

Page 13 - and skip; Add New Printer; button in Figure 3-9 and then Figure 3-11 appears. Follow the steps

TL-PS110P Single Parallel Port Fast Ethernet Print Server 7 Figure 3-8 8. After that the “ Select a Printer ” page will appear, as shown in Figure 3-9. ¾ If the printer desired has already existed in the list, select it and then click Next and skip to Step 16 to complete the installation. ¾ If you n...

Page 14 - To add a new printer, you can also go; Start > Printers and Faxes; on the left to begin the following installation as shown in; to launch; Windows Add Printer Wizard

TL-PS110P Single Parallel Port Fast Ethernet Print Server 8 Figure 3-9 ) Note: To add a new printer, you can also go Start > Printers and Faxes , and then click “ Add a printer ” on the left to begin the following installation as shown in Figure 3-10 . Figure 3-10 9. Click Add New Printer to laun...

Page 15 - check box is; NOT; checked. Then click; ” radio button and select “

TL-PS110P Single Parallel Port Fast Ethernet Print Server 9 Figure 3-11 10. Make sure the Automatically detect and install my Plug and Play printer check box is NOT checked. Then click Next . Figure 3-12 11. Check “ Use the following port ” radio button and select “ LPT1: (Recommended Printer Port) ...

Page 16 - and; Printer; from the lists of printer’s driver. Then click; . Supply a name for the printer and choose whether you want to make it

TL-PS110P Single Parallel Port Fast Ethernet Print Server 10 Figure 3-13 12. Select Manufacturer and Printer from the lists of printer’s driver. Then click Next . Figure 3-14 13. If you already have the printer’s driver installed, you will be asked whether to keep it or to replace it. Click Next . S...

Page 18 - step by step instruction to finish the installation.; Start; and highlight your newly installed; Properties

TL-PS110P Single Parallel Port Fast Ethernet Print Server 12 Figure 3-17 16. Then you will see the printer be added to the list. Select the printer and click Next . Follow the step by step instruction to finish the installation. Figure 3-18 17. From Windows system, go to Start > Printers and Faxe...

Page 19 - and verify that the print server’s port appears.; General; to verify the configuration.

TL-PS110P Single Parallel Port Fast Ethernet Print Server 13 Figure 3-19 18. Select Ports and verify that the print server’s port appears. Figure 3-20 19. Go to General ; click Print Test Page to verify the configuration.

Page 20 - If you wish to install more print servers, repeat the above steps.; Using Web Management Page in Windows XP/ Windows Vista/

TL-PS110P Single Parallel Port Fast Ethernet Print Server 14 Figure 3-21 ) Note: If you wish to install more print servers, repeat the above steps. 3.2 Using Web Management Page in Windows XP/ Windows Vista/ Windows 7 To connect to the print server using the web management page, the configuration fo...

Page 21 - click; Wireless Network Connection

TL-PS110P Single Parallel Port Fast Ethernet Print Server 15 Figure 3-22 2. Select and double-click Networking Connections . Figure 3-23 3. Right click Wireless Network Connection , and select Properties .

Page 22 - , and then double click it or click; Select “Use the following IP address” and input a static IP address; OK; IP address of your printer server has been changed to

TL-PS110P Single Parallel Port Fast Ethernet Print Server 16 Figure 3-24 4. Select Internet Protocol (TCP/IP) , and then double click it or click Properties . Figure 3-25 5. Select “Use the following IP address” and input a static IP address 192.168.0.X (1<X<10 or 10<X<255, for 192.168.0...

Page 23 - in lower; button or press the; Enter

TL-PS110P Single Parallel Port Fast Ethernet Print Server 17 Figure 3-26 6. Open a web-browser and type in the IP address of the print server (the default is 192.168.0.10) in the address field of the browser to login to the web management of the print server. Figure 3-27 7. After a moment, a login w...

Page 25 - and then wait the print server to save the changes and restart.

TL-PS110P Single Parallel Port Fast Ethernet Print Server 19 Figure 3-30 10. Click Save & Restart and then wait the print server to save the changes and restart.

Page 26 - ” page as shown in Figure 3-32. Fill in the

TL-PS110P Single Parallel Port Fast Ethernet Print Server 20 Figure 3-31 11. Enter the “ Internet Protocol (TCP/IP) Properties ” page as shown in Figure 3-32. Fill in the following parameters. ¾ IP Address: Specify an IP address for your adapter. The IP address must be within the same subnet as your...

Page 27 - Installed A Printer Before; Using Web Management Page on MAC OS; the; Apple Icon; on the left side of the top-bar, and then choose; System Preferences

TL-PS110P Single Parallel Port Fast Ethernet Print Server 21 Figure 3-32 12. Add a Standard TCP/IP port for the printer. ¾ If you’ve already installed the printer on your computer, please refer to 3.4.1 If You Have Installed A Printer Before to add a Standard TCP/IP port. ¾ If you never install a pr...

Page 28 - Follow the steps to set the airport’s IP address.

TL-PS110P Single Parallel Port Fast Ethernet Print Server 22 Figure 3-34 3. Follow the steps to set the airport’s IP address. Figure 3-35 4. Open the Safari and log into the TL-PS110P. Change its IP Address, Subnet Mask and Default Router to 192.168.1.10 , 255.255.255.0 and 192.168.1.1 . After the c...

Page 30 - Apple icon; to add a Standard TCP/IP port

TL-PS110P Single Parallel Port Fast Ethernet Print Server 24 Figure 3-38 6. Click the Apple icon > System Performances > Print & Fax to add a Standard TCP/IP port for the printer. Figure 3-39

Page 33 - Printer Installation; your system. In this section, we take Windows Vista for example.; If You Have Installed A Printer Before

TL-PS110P Single Parallel Port Fast Ethernet Print Server 27 Figure 3-42 3.4 Printer Installation Other computers in the same local network that need to share the printing should add the Standard TCP/IP port on their system. There’re two conditions. Please choose one according to your system. In thi...

Page 36 - , and input the queue name as; and then; Finish

TL-PS110P Single Parallel Port Fast Ethernet Print Server 30 Figure 3-47 6. Choose LPR , and input the queue name as lp1 . Click OK . Figure 3-48 7. Click Next and then Finish , to complete the wizard.

Page 37 - Apply

TL-PS110P Single Parallel Port Fast Ethernet Print Server 31 Figure 3-49 Figure 3-50 8. Click Close and Apply .

Page 38 - If You Never Install A Printer Before; Star

TL-PS110P Single Parallel Port Fast Ethernet Print Server 32 Figure 3-51 Figure 3-52 9. Now, the printer port has been created. 3.4.2 If You Never Install A Printer Before 1. Click Star > Control Panel , and select Devices and Printers .

Page 39 - ”, and the type of port is “

TL-PS110P Single Parallel Port Fast Ethernet Print Server 33 Figure 3-53 2. Click Add a printer . Figure 3-54 3. Select Add a local printer . Figure 3-55 4. Select “ Create a new port ”, and the type of port is “ Standard TCP/IP Port ”.

Page 40 - IP address; of the print server and click

TL-PS110P Single Parallel Port Fast Ethernet Print Server 34 Figure 3-56 5. Input the IP address of the print server and click Next . The windows will detect the TCP/IP Port. Please wait for the next page. Figure 3-57

Page 41 - and click; Settings; select; LPR; as the Protocol and the Queue Name is; Have Disk

TL-PS110P Single Parallel Port Fast Ethernet Print Server 35 Figure 3-58 6. On the following page, select Custom and click Settings . And then on the next page, please select LPR as the Protocol and the Queue Name is lp1 . Figure 3-59 7. The windows will ask you to install the driver of the printer....

Page 44 - Chapter 4. More Configuration for the Print Server; connected peripheral device.; admin; in lower case

TL-PS110P Single Parallel Port Fast Ethernet Print Server 38 Chapter 4. More Configuration for the Print Server The Print Server contains an embedded web server that can be accessed through a supported web browser on a WLAN, for example, IE6, Firefox or above is recommended. The embedded web server ...

Page 46 - the print server’s device name.

TL-PS110P Single Parallel Port Fast Ethernet Print Server 40 4.2.1 System Figure 4-4 ¾ Print Server Name: This option allows you to view device name of the print server. To correct the print server’s device name. ¾ System Contact: This option allows you to view contact name of the print server and t...

Page 47 - connected with the print server, it will be show in the model box.; Printing Language Supported:; This option allows you to view command to set the printer.

TL-PS110P Single Parallel Port Fast Ethernet Print Server 41 4.2.2 Printer Figure 4-5 ¾ Manufacturer: This option allows you to view manufacturer of the printer. When the printer connected with the print server, it will be show in the manufacture box. ¾ Model Number: This option allows you to view m...

Page 50 - There are two ways to select this option, includes; Disable; or; Auto Detect; Click

TL-PS110P Single Parallel Port Fast Ethernet Print Server 44 Figure 4-8 ¾ Bi-directional Settings: This option allows you to select the bi-directional of the print server. There are two ways to select this option, includes Disable or Auto Detect . 4.3.3 TCP/IP Click TCP/IP , the following screen wil...

Page 51 - This option allows you to select DHCP/ BOOTP option.

TL-PS110P Single Parallel Port Fast Ethernet Print Server 45 Figure 4-9 ¾ Use DHCP/BOOTP: This option allows you to select DHCP/ BOOTP option. If there is a DHCP/BOOTP server on your network. This option allows the print server to obtain IP-related settings automatically from your DHCP server. ¾ IP ...

Page 53 - to reboot the print server.

TL-PS110P Single Parallel Port Fast Ethernet Print Server 47 Figure 4-11 4.5 Restart Click OK to reboot the print server. Figure 4-12

Page 54 - Appendix A: How to Reset the Print Server; Reset

TL-PS110P Single Parallel Port Fast Ethernet Print Server 48 Appendix A: How to Reset the Print Server If you lose the connection with the TL-PS110P by doing wrong configuration, you need to reset it to factory and reconfigure it again. Here are the steps for the resetting 1. Unplug the power adapte...

Page 55 - Appendix B: Troubleshooting

TL-PS110P Single Parallel Port Fast Ethernet Print Server 49 Appendix B: Troubleshooting General Troubleshooting Overview The most common problems, which cause the print server to perform improperly, are covered in this chapter. If a problem still exists after reading this chapter, please contact yo...

Page 56 - address on the network.; PSAdmin; Manual Setup

TL-PS110P Single Parallel Port Fast Ethernet Print Server 50 installing the print server." Regarding this problem, there are three possible causes: A. The print server's Node ID you specified in the "arp" command is not correct. If this is the case, please ensure the Node ID field in the...

Page 57 - Connect your print server to Segment A as a networked node.; BoxIPAddress; Leave other

TL-PS110P Single Parallel Port Fast Ethernet Print Server 51 2. If the solution described above is not applicable, you have to follow the instructions below to set up the print server's IP address. For the purpose of explanation, we assume the NT server is on Segment A and its IP address is 192.72.2...

Page 58 - Appendix C: Frequently Asked Questions; Possible explanations:

TL-PS110P Single Parallel Port Fast Ethernet Print Server 52 Appendix C: Frequently Asked Questions 1) Question A: Print jobs are sent to the print queue successfully, but fail to be sent to the printer. Possible explanations: 1. The Print server Name/Print Queue configuration is incorrect. 2. The P...

Page 59 - PSAdmin to the print server unit.; Possible Explanation:

TL-PS110P Single Parallel Port Fast Ethernet Print Server 53 1) Check the wireless network connection, especially from the workstation running the PSAdmin to the print server unit. 2) Upgrade the print server again by PSAdmin or WEB browser. 4) Question D The setup Wizard can’t find print server. Po...

Page 60 - Appendix D: Additional Installation Instructions; under Windows 95/98, please redirect the printer named “; Panasonic; ” or “; Network Print Port; “Panasonic KX-P6500 GDI” to the print server.

TL-PS110P Single Parallel Port Fast Ethernet Print Server 54 Appendix D: Additional Installation Instructions Panasonic KX-P6100/6300/6500 If you are using a Panasonic KX-P6100/6300/6500 laser printer with the print server through the Network Print Port under Windows 95/98, please redirect the print...