TP-Link TL-PA210 - Manuals

TP-Link TL-PA210 – Manual in PDF format online.

Manuals:

Manual

Manual TP-Link TL-PA210

Summary

Page 2 - COPYRIGHT & TRADEMARKS; Specifications are subject to change without notice.

COPYRIGHT & TRADEMARKS Specifications are subject to change without notice. is a registered trademark of TP-LINK TECHNOLOGIES CO., LTD. Other brands and product names are trademarks or registered trademarks of their respective holders. No part of the specifications may be reproduced in any form ...

Page 3 - FCC STATEMENT; Reorient or relocate the receiving antenna.; CE Mark Warning

FCC STATEMENT This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses a...

Page 4 - Safety Information; Avoid water and wet locations.

Safety Information • When product has power button, the power button is one of the way to shut off the product; when there is no power button, the only way to completely shut off power is to disconnect the product or the power adapter from the power source. • Don’t disassemble the product, or make r...

Page 5 - DECLARATION OF CONFORMITY; For the following equipment:; AV200 Nano Powerline Adapter; applicable to the product within the scope of Council Directives:; Yang Hongliang

TP-LINK TECHNOLOGIES CO., LTD DECLARATION OF CONFORMITY For the following equipment: Product Description: AV200 Nano Powerline Adapter Model No.: TL-PA210 Trademark: TP-LINK We declare under our own responsibility that the above products satisfy all the technical regulations applicable to the produc...

Page 6 - CONTENTS; Physical Interface

CONTENTS Package Contents ........................................................................................................................................... 1 Chapter 1 Introduction ..............................................................................................................

Page 7 - Package Contents; One Resource CD

TL-PA210 AV200 Nano Powerline Adapter 1 Package Contents The AV200 Nano Powerline Adapter package contains the following items: ¾ One AV200 Nano Powerline Adapter (There are two AV200 Nano Powerline Adapters in Starter Kit) ¾ One RJ45 Ethernet Cable (There are two RJ45 Ethernet Cables in Starter Kit...

Page 8 - Chapter 1 Introduction; Pair; System Requirement

TL-PA210 AV200 Nano Powerline Adapter 2 Chapter 1 Introduction Congratulations on your purchase of this outstanding Powerline Adapter. This device is an AV200 Nano Powerline Adapter which transforms your house’s existing electrical wiring into a ubiquitous networking infrastructure. Simply plug this...

Page 10 - Chapter 2 Connecting Mechanism; Item

TL-PA210 AV200 Nano Powerline Adapter 4 Chapter 2 Connecting Mechanism 2.1 Introduction The Powerline Adapter supports up to 200Mbps data rate. With this high speed connection rate, this Powerline Adapter allows you to setup a high speed home network by using your home existing electrical wiring. Si...

Page 11 - Interface

TL-PA210 AV200 Nano Powerline Adapter 5 On The Ethernet port is connected, but there is no data being transferred. Blinking The Ethernet port is transferring data. Ethernet LED Off The Ethernet port isn’t connected. ) Note: 5 minutes after the device connected to the adapter is turned off, and the a...

Page 12 - For detailed information about the Pair button, please refer to; Connection Instruction; ON

TL-PA210 AV200 Nano Powerline Adapter 6 ) Note: 1. If you press the Pair button for more than 10 seconds, the Powerline Adapter will leave the network which it is associated with and its network name assumes a random value. The Power LED turns off when it disconnects from the Powerline network. 2. F...

Page 13 - Hardware Connection – Internet

TL-PA210 AV200 Nano Powerline Adapter 7 2.6 Hardware Connection – Internet This section describes how to connect the Powerline Adapter into your existing ADSL broadband connection via ADSL Ethernet port. Follow the procedures described below to connect the Powerline Adapter to your ADSL broadband co...

Page 15 - Chapter 3 Installing Management Utility; Note; automatically pop up on your computer’s screen.; Management Utility; , and then the program installation

TL-PA210 AV200 Nano Powerline Adapter 9 Chapter 3 Installing Management Utility Please verify that no other Powerline Adapter or any Encryption Management Utilities are installed before installing the provided software. If other Powerline Utilities are installed, uninstall them and restart your pers...

Page 18 - Step 3: After the installation, a shortcut to the; “Powerline Utility”; application icon is provided on the

TL-PA210 AV200 Nano Powerline Adapter 12 Step 3: After the installation, a shortcut to the “Powerline Utility” application icon is provided on the windows desktop.

Page 19 - Chapter 4 Using the Management Utility; Double click on the icon; “Status”; The; Status

TL-PA210 AV200 Nano Powerline Adapter 13 Chapter 4 Using the Management Utility After you’d successfully installed the Powerline Adapter hardware and Management Utility software, you can set up or configure the devices according to your need. This Powerline Utility enables the users to identify powe...

Page 22 - Password is unnecessary to enter for renaming.

TL-PA210 AV200 Nano Powerline Adapter 16 (1) Select the desired device and click the Modify button to display the following dialog. (2) Enter a new name for the selected adapter and enter its password (Take note of the password format). The password can be found on the back of adapter. (3) Click the...

Page 23 - System; Click the; Upgrade Firmware; following dialog will pop up.; NVM

TL-PA210 AV200 Nano Powerline Adapter 17 4.3 System The System tab window is for some basic settings of the adapter. On this tab window, you can upgrade the firmware to the latest version, reset the adapter’s settings to the factory defaults and configure all adapters’ network names. 4.3.1 Upgrade F...

Page 24 - Every Powerline Adapter on your home network; MUST; have the same; Network Password; for

TL-PA210 AV200 Nano Powerline Adapter 18 ¾ PIB : Parameter Information Block. It contains configuration values that establish device network identity, general capabilities and operational modes. If you want to upgrade the version of firmware for the device, please select appropriate Firmware and PIB...

Page 25 - Chapter 5 Advanced Feature: How to Use the Pair Buttons; powerline devices which also support the; Set Up a Powerline AV Network with the Pair Button; button on only; Create a Powerline network using the Pair button

TL-PA210 AV200 Nano Powerline Adapter 19 Chapter 5 Advanced Feature: How to Use the Pair Buttons 5.1 Pair (Secure with 128 bits-AES) The Homeplug AV standard uses 128-bit AES (Advanced Encryption Standard) to safely transmit data between powerline adapters. For the powerline adapters to communicate ...

Page 26 - . Press and hold the Pair button on Powerline adapter C for 1 second.; The sequence of Step 1 and Step 2 can be exchanged.; Leave

TL-PA210 AV200 Nano Powerline Adapter 20 Join an existing Powerline AV Network: Powerline adapter A and Powerline adapter B form a HomeplugAV Network, Powerline adapter C wants to join this network. Step 1 . Press and hold the Pair button on Powerline adapter C for 1 second. Step 2 . Press and hold ...

Page 27 - Appendix A: Troubleshooting; Power LED does not light up.

TL-PA210 AV200 Nano Powerline Adapter 21 Appendix A: Troubleshooting The Troubleshooting provides answers to common problems regarding the Powerline Adapter. 1. The Power LED does not light up. Ans. Check the following: 1. Make sure that the Powerline Adapter is properly plugged into a power outlet....