TP-Link TD-861B - Manuals - manualsarea.com

Page 2 - COPYRIGHT & TRADEMARKS

COPYRIGHT & TRADEMARKS Specifications are subject to change without notice. is a registered trademark of TP-LINK TECHNOLOGIES CO., LTD. Other brands and product names are trademarks or registered trademarks of their respective holders. No part of the specifications may be reproduced in any form ...

Page 3 - FCC STATEMENT; CE Mark Warning

FCC STATEMENT This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses a...

Page 4 - Package Contents

Package Contents The following contents should be found in your package: ¾ One TD-8610/TD-8610B External ADSL2+ MODEM ¾ One AC power Adapter for TD-8610/TD-8610B External ADSL2+ MODEM ¾ One RJ45 cable ¾ Two RJ11 cable ¾ One ADSL splitter (only available for TD-8610) ¾ One Resource CD for TD-8610/TD-...

Page 5 - CONTENTS

CONTENTS Chapter 1. Product Overview .................................................................... 1 1.1 Product main specification .............................................................................1 1.2 Supporting protocol .............................................................

Page 6 - Chapter 1. Product Overview; Product main specification

TD-8610 / 8610B External ADSL MODEM 1 Chapter 1. Product Overview With the excellent design of circuit and high quality production, we guarantee ADSL2+ MODEM a high performance, very good stability and easy to use. TD-8610/TD-8610B is a complete plug-and-play solution. With standard Ethernet interfa...

Page 7 - Working environment

TD-8610 / 8610B External ADSL MODEM 2 ¾ Max upload data-rate: 1Mbps ¾ Max line length: 6Km 1.4 ATM property ¾ AAL0, AAL5, OAM, RM, and raw cell types supported ¾ Direct hardware support for 4 Receive VCs, with additional RX VCs and TX VCs supported in software ¾ Full 24-bit Virtual Path Identifier (...

Page 8 - Chapter 2. Hardware Installation Guide; System requirement

TD-8610 / 8610B External ADSL MODEM 3 Chapter 2. Hardware Installation Guide 2.1 System requirement Confirm your computer has been installed with networking interface card (NIC) before connecting ADSL MODEM to your computer, with operating system supporting the TCP/IP protocol. 2.2 LED explanation T...

Page 9 - Hardware installation procedures

TD-8610 / 8610B External ADSL MODEM 4 2.3 Rear-panel ¾ ON/OFF: Turn on/off the ADSL modem’s power. ¾ Power (9VAC/0.8A input) : please do not use any unknown power adaptor, otherwise that may cause damage to your ADSL MODEM. ¾ RESET (reset default) : When the device is working, please press the reset...

Page 11 - Chapter 3. How to use; Computer Configuration

TD-8610 / 8610B External ADSL MODEM 6 Chapter 3. How to use 3.1 Computer Configuration 1. Connect the cable according to Chapter 2, and then turn on the power. 2. Change the IP address of your PC （ Figure 3-1 ） : Open TCP/IP Properties of the LAN card in your PC, enter the IP address as 192.168.1.* ...

Page 15 - Appendix A: Default Configuration

TD-8610 / 8610B External ADSL MODEM 10 Appendix A: Default Configuration USER NAME admin PASSWORD admin IP ADDRESS 192.168.1.1 VPI/VCI 0/32,1/33,0/35,0/100,0/200,8/35,8/81