TP-Link MC210CS - Manuals - manualsarea.com

Page 2 - COPYRIGHT & TRADEMARKS; Specifications are subject to change without notice.

COPYRIGHT & TRADEMARKS Specifications are subject to change without notice. is a registered trademark of TP-LINK TECHNOLOGIES CO., LTD. Other brands and product names are trademarks or registered trademarks of their respective holders. No part of the specifications may be reproduced in any form ...

Page 3 - CONTENTS

i CONTENTS Package Contents...........................................................................1 1. Introduction.............................................................................1 2. Features...................................................................................2 3. App...

Page 4 - Package Contents; One

1 Package Contents Before starting using the products, make sure what you have is what you ordered. The Converter includes: ¾ One Converter ¾ One AC-DC Power Adapter (DC9V/600mA) ¾ One User Guide 1. Introduction MC200CM, MC210CS and MC220L are Gigabit Ethernet Media Converters. The FX port of MC220L...

Page 6 - Connectors and Network Cables Supported; Interface; Appearance Indication; LED Indicators

3 ¾ FX port supports hot-swappable(only for MC220L). Connectors and Network Cables Supported The connectors and network cables supported by the converter are listed as follows. ¾ Connectors: RJ-45, SC, LC. ¾ Network Cables: Cat.5 Twisted-Pair(below abbreviated as TP), 9/125um Single-mode fiber, 62.5...

Page 7 - FX TP

4 When you take a look at these indicators, you will know what’s happening on your network. Name Status Indication On Power on PWR Off Power off On There’s a valid link for FX Port. FX LINK Off There’s no valid link for FX Port. On There’s a valid link for TP Port. LINK Off There’s no valid link for...

Page 8 - Installation Guides; Gigabit Ethernet Media Converter:

5 ¾ AUTO: The FX port operates in Auto-Negotiation mode. Note: Be sure the opposite end is using the same setting. When using two converters at the same time, the two converters must be set to FORCE mode . When connected to other products, such as TL- SL2210WEB or TL-SL2428WEB, the converter must be...

Page 10 - Transmits and receives data between MC220L and; SFP module; Configuration; Place two converters back to back between the following end

7 Transmits and receives data between MC220L and MC200CM/MC210CS Note: MC220L could be connected to MC200CM or MC210CS, however, the SFP module in MC220L must use the same mode and the same wavelength as the opposite end. (Please refer to the table below) And the connection fiber must be LC-SC fiber...

Page 11 - Installation Procedure; Connection of a Converter and a 1000Base-TX Device (HUB or

8 Note: For the correct connection between 2 Media Converters, please refer to connection diagram in 4.1 ---- two MC200CM, two MC210CS, two MC220L or one MC220L with another MC200CM/MC210CS. 2. Another effective application is to place one converter directly between a 1000Base-TX network and a fiber...

Page 12 - Connection of two Converters or a Converter and a 1000Base- FX; Install Media Converter into MC1400; Turn off the switch power, take off the front guard on the chassis,

9 2. Connection of two Converters or a Converter and a 1000Base- FX Device: Use a SC fiber cable to connect the two Converters’ SC connectors or the SC connecters of a Converter and a 1000Base-FX Device. 3. Turn on the power. 4.4 Install Media Converter into MC1400 Tweak out the two screws located o...