TP-Link External ADSL2+ Rounter - Manuals

TD-8840 External ADSL2+ Router User Guide - Supports RFC2364 (PPPoA) - Supports RFC2516 (PPPoE) - Supports RFC1483 (EoA)(Bridged *and Router) - Supports RFC1577 (IPoA) NOTE . “*” Needs the third-party software. 1.3 Transmit data-rate ¾ Max download data-rate: 24Mbps ¾ Max upload data-rate: 1Mbps ¾ M...

TD-8840 External ADSL2+ Router User Guide Chapter 2: Hardware Installation Guide The TD-8840 maintains five separate interfaces, four Ethernet and one ADSL interface. The Router should not be located where it will be exposed to moisture or excessive heat. Place the Router in a location where it can ...

TD-8840 External ADSL2+ Router User Guide manufacturer’s setup. ¾ 1~4(LAN) : Connect with your computer’s NIC. ¾ LINE(WAN) : Connect to the MODEM Port of Splitter or Connecting the telephone line. 2.4 Hardware installation procedures （ figure2-1 ） The procedure to install the Router can be described...

TD-8840 External ADSL2+ Router User Guide Chapter 3: System Configuration 3.1 Computer Configuration 1. Connect the cable according to Chapter 2, turn on the power. 2. Change the IP address of your PC （ Figure 3-1 ） : Open TCP/IP Properties of the LAN card in your PC, enter the IP address as 192.168...

TD-8840 External ADSL2+ Router User Guide The users of Windows 2000/NT/XP can do the following: Right-click Network Neighbor -> Choose Properties -> Right-click Local Connection -> Choose Properties -> Double-click Internet Protocol (TCP/IP). NOTE: The words in fact may be different with...

TD-8840 External ADSL2+ Router User Guide Then you will see the Figure 3-3. You will see some information such as link rate and so on. Figure 3-3 Default value of user name and password is “ admin ” ; if you want to change them, please go to “ Management ” Æ “ Access control ” Æ “ Passwords ”. (Figu...

TD-8840 External ADSL2+ Router User Guide 3.3 Web Setup Choose “ Advanced Setup ” Æ ” WAN ”, you will enter the page of Wide Area Network (WAN) Setup, you will see the Figure 3-5. Figure 3-5 There are 7 PVC links in the WAN setup page, choose the fit PVC according to your needs, and then click the e...

TD-8840 External ADSL2+ Router User Guide Enter VPI/VCI value and service category which is provided by your ISP, click next to enter the next step. You will see the figure 3-7. NOTE : The type of network protocol selected may be different in different area, there are five types （ Figure 3-7 ） , So ...

TD-8840 External ADSL2+ Router User Guide Figure 3-8 You will see the figure 3-9. Then turn on the selected functions according to your demands. Clicking the next button to enter the next step, you will see the Figure 3-10, finally click save to complete the configuration. Figure 3-9 - 12 -

TD-8840 External ADSL2+ Router User Guide Figure 3-10 ¾ PPP over Ethernet (PPPoE) If you select the protocol of PPP over Ethernet (PPPoE), you will see the figure 3-11, enter the value of user name and password which is provided by your ISP, after selecting the other function(often using the default...

TD-8840 External ADSL2+ Router User Guide Clicking the next button to enter the next step, you will see the Figure 3-13, finally click save to complete the configuration. Figure 3-12 Figure 3-13 ¾ MAC Encapsulation Routing (MER) - 14 -

TD-8840 External ADSL2+ Router User Guide If you select the protocol of MAC Encapsulation Routing (MER), you will see the page(Figure 3-14). Enter the parameter and the way which is provided by your ISP, then click the next button. Figure 3-14 You will see the figure 3-15. Then turn on the selected ...

TD-8840 External ADSL2+ Router User Guide Figure 3-16 ¾ IP over ATM (IPoA) If you select the protocol of IP over ATM (IPoA), you will see the figure 3-17, enter the parameter and the way which is provided by your ISP, then click the next button. Figure 3-17 You will see the page (figure 3-18), then ...

TD-8840 External ADSL2+ Router User Guide Figure 3-20 Figure 3-21 NOTE : After you complete the settings, the new settings must be saved and the Router must be restarted for the settings to go into effect. Please press the Save/Reboot button to restart, referring to the Figure 3-22. - 18 -

TD-8840 External ADSL2+ Router User Guide Chapter 4: Advantage management setup In order to satisfy customer’s needs, feel free to utilize Advantage application and on-line software upgrade , we provided a perfect Web management interface for you, its main function is as follows: ¾ Upgrade software ...

TD-8840 External ADSL2+ Router User Guide Chapter 5: FQA 1. What related parameters are required to acquire ISP when you want to access the internet by ADSL2+ ROUTER? 1) Dial user: Connection protocol, User name, Password, Value of VCI/VPI, Encapsulation mode of AAL5 and so on. 2) Static IP user: Co...

TD-8840 External ADSL2+ Router User Guide Appendix A: Default Configuration USER NAME admin PASSWORD admin IP ADDRESS 192.168.1.1 VPI/VCI 0/32,1/33,0/35,0/100,0/200,8/35,8/81 - 22 -

TD-8840 External ADSL2+ Router User Guide Appendix B: Contact Information For help with the installation or operation of the TP-LINK TD-8840 External ADSL2+ ROUTER, please contact us. E-mail: [email protected] Website: http://www.tp-link.com - 23 -