TP-Link 1910010993 - Manuals

安全諮詢及注意事項 ●請使用原裝電源供應器或只能按照本產品注明的電源類型使用本產品。 ●清潔本產品之前請先拔掉電源線。請勿使用液體、噴霧清潔劑或濕布進行清潔。 ●注意防潮，請勿將水或其他液體潑灑到本產品上。 　 ●插槽與開口供通風使用，以確保本產品的操作可靠並防止過熱，請勿堵塞或覆蓋開口。 ●請勿將本產品置放於靠近熱源的地方。除非有正常的通風，否則不可放在密閉位置中。 ●請不要私自打開機殼，不要嘗試自行維修本產品，請由授權的專業人士進行此項工作。 Продукт сертифіковано згідно с правилами системи УкрСЕПРО на відповідність...

TP-LINK TECHNOLOGIES CO., LTD DECLARATION OF CONFORMITY For the following equipment: Product Description: AC750 Wireless Dual Band Gigabit Router Model No.: C2 Trademark: TP-LINK We declare under our own responsibility that the above products satisfy all the technical regulations applicable to the p...

CONTENTS Package Contents..................................................................................................... 1 Chapter 1. Introduction......................................................................................... 2 1.1 Overview of the Router.................................

Archer C2 AC750 Wireless Dual Band Gigabit Router - 1 - Package Contents The following items should be found in your package:  Archer C2 AC750 Wireless Dual Band Gigabit Router  DC Power Adapter for Archer C2 AC750 Wireless Dual Band Gigabit Router  Quick Installation Guide  Resource CD for Arch...

Archer C2 AC750 Wireless Dual Band Gigabit Router - 2 - Chapter 1. Introduction 1.1 Overview of the Router The Archer C2 AC750 Wireless Dual Band Gigabit Router integrates 4-port Switch, Firewall, NAT-router and Wireless AP. The AC750 Wireless Dual Band Gigabit Router delivers exceptional range and ...

Archer C2 AC750 Wireless Dual Band Gigabit Router - 3 - 1.2 Conventions The router or Archer C2 mentioned in this guide stands for Archer C2 AC750 Wireless Dual Band Gigabit Router without any explanation. 1.3 Main Features  Complies with IEEE 802.11ac.  One 10/100/1000M Auto-Negotiation RJ45 Inte...

Archer C2 AC750 Wireless Dual Band Gigabit Router - 4 - 1.4 Panel Layout 1.4.1 The Front Panel Figure 1-1 LEDs on the front panel The router’s LEDs are located on the front panel (View from left to right). Name Status Indication Off Power is off. (Power) On Power is on. Off The wireless function is ...

Archer C2 AC750 Wireless Dual Band Gigabit Router - 5 - 1.4.2 The Rear Panel Figure 1-2 Rear Panel sketch The following parts are located on the rear panel (View from left to right).  WPS/Reset: Pressing this button for less than 5 seconds enables the WPS function. If your client devices, such as w...

Archer C2 AC750 Wireless Dual Band Gigabit Router - 6 -  USB: The USB port connects to a USB storage device or a USB printer.  Power On/Off: The switch for the power.  Power: The Power socket is where you will connect the power adapter. Please use the power adapter provided with this Archer C2 AC...

Archer C2 AC750 Wireless Dual Band Gigabit Router - 7 - Chapter 2. Connecting the router 2.1 System Requirements  Broadband Internet Access Service (DSL/Cable/Ethernet)  One DSL/Cable Modem that has an RJ45 connector (which is not necessary if the router is connected directly to the Ethernet)  PC...

Archer C2 AC750 Wireless Dual Band Gigabit Router - 8 - power on the router, please make sure your computer is NOT connected to any other wireless network.) Figure 2-1 Hardware Installation Figure 2-2 USB Installation  Note: If you want to use the router to share files or printer, plug the USB stor...

Archer C2 AC750 Wireless Dual Band Gigabit Router - 9 - Chapter 3. Quick Installation Guide This chapter will show you how to configure the basic functions of your AC750 Wireless Dual Band Gigabit Router using Quick Setup Wizard within minutes. 3.1 TCP/IP Configuration The default IP address of the ...

Archer C2 AC750 Wireless Dual Band Gigabit Router - 11 - 3.2 Quick Installation Guide With a Web-based utility, it is easy to configure and manage the AC750 Wireless Dual Band Gigabit Router. The Web-based utility can be used on any Windows, Macintosh or UNIX OS with a Web browser, such as Microsoft...

Archer C2 AC750 Wireless Dual Band Gigabit Router - 12 - Figure 3-5 Quick Setup 3. Click Next , and then WAN Connection Type page will appear, shown in Figure 3-6. Figure 3-6 WAN Connection Type The router provides Auto-Detect function and supports five types of WAN connection: Dynamic IP , Static I...

Archer C2 AC750 Wireless Dual Band Gigabit Router - 17 - Figure 3-13 Quick Setup – Wireless 2.4GHz  Wireless Network Name - Also called the SSID (Service Set Identification). Enter a value of up to 32 characters. The same name must be assigned to all wireless devices in your network. The default SS...

Archer C2 AC750 Wireless Dual Band Gigabit Router - 18 -  Band - This field displayed the operating frequency being configured.  Mode - This field determines the wireless mode which the router works on.  11bg mixed - Select if you are using both 802.11b and 802.11g wireless clients.  11bgn mixed...

Archer C2 AC750 Wireless Dual Band Gigabit Router - 19 - your network. The default SSID is set to be TP-LINK_5GHz_XXXXXX. This value is case-sensitive. For example, TEST is NOT the same as test .  Region - Select your region from the drop-down list. This field specifies the region where the wireles...

Archer C2 AC750 Wireless Dual Band Gigabit Router - 20 - Figure 3-15 Quick Setup - Comfirm 9. Click the Finish button to complete the Quick Setup . Figure 3-16 Quick Setup - Finish

Archer C2 AC750 Wireless Dual Band Gigabit Router - 21 - Chapter 4. Configuring the router This chapter will show each key function of the Web page and its configuration method. 4.1 Login After your successful login, you will see the main menus on the left of the Web-based utility. On the right, the...

Archer C2 AC750 Wireless Dual Band Gigabit Router - 22 - Figure 4-1 Status 4.3 Quick Setup Please refer to 3.2 Quick Installation Guide .

Archer C2 AC750 Wireless Dual Band Gigabit Router - 23 - 4.4 Network Figure 4-2 the Network menu There are three submenus under the Network menu (shown in Figure 4-2): WAN , LAN and MAC Clone . Click any of them, and you will be able to configure the corresponding function. 4.4.1 WAN Choose menu “ N...

Archer C2 AC750 Wireless Dual Band Gigabit Router - 33 -  Note: If you don't know how to choose the appropriate connection type, click the Detect button to allow the router to automatically search your Internet connection for servers and protocols. The connection type will be reported when an activ...

Archer C2 AC750 Wireless Dual Band Gigabit Router - 34 - 2) If the new LAN IP Address you set is not in the same subnet, the IP Address pool of the DHCP server will change accordingly at the same time ， while the Virtual Server and DMZ Host will not take effect until they are re-configured. 4.4.3 MA...

Archer C2 AC750 Wireless Dual Band Gigabit Router - 35 - Figure 4-12 Dual Band Selection  2.4GHz (802.11b/g/n) - Click the box, and then the router will only work in 2.4GHz frequency. You can use the 2.4GHz band to connect to many classic wireless devices like gaming consoles, laptops, DVRs, ect. ...

Archer C2 AC750 Wireless Dual Band Gigabit Router - 37 -  11bgn mixed - Select if you are using a mix of 802.11b, 11g, and 11n wireless clients. It is strongly recommended that you set the Mode to 802.11bgn mixed , and all of 802.11b, 802.11g, and 802.11n wireless stations can connect to the router...

Archer C2 AC750 Wireless Dual Band Gigabit Router - 38 -  Key type - This option should be chosen according to the AP's security configuration. It is recommended that the security type is the same as your AP's security type  WEP Index - This option should be chosen if the key type is WEP(ASCII) or...

Archer C2 AC750 Wireless Dual Band Gigabit Router - 40 - Step 1: Keep the default WPS status as Enabled and click the Add device button in Figure 4-16, then Figure 4-19 will appear. Figure 4-19 Add A New Device Step 2: Enter the PIN number from the client device in the field on the WPS screen above....

Archer C2 AC750 Wireless Dual Band Gigabit Router - 44 - 4.6.4 Wireless MAC Filtering Choose menu “ Wireless 2.4GHz → Wireless MAC Filtering ”, you can control the wireless access by configuring the Wireless MAC Filtering function, shown in Figure 4-24. Figure 4-24 Wireless MAC Filtering To filter w...

Archer C2 AC750 Wireless Dual Band Gigabit Router - 46 - 4.6.5 Wireless Advanced Choose menu “ Wireless 2.4GHz → Wireless Advanced ”, you can configure the advanced settings of your wireless network. Figure 4-26 Wireless Advanced  Transmit Power - Here you can specify the transmit power of router. ...

Archer C2 AC750 Wireless Dual Band Gigabit Router - 47 -  DTIM Interval - This value determines the interval of the Delivery Traffic Indication Message (DTIM). A DTIM field is a countdown field informing clients of the next window for listening to broadcast and multicast messages. When the router h...

Archer C2 AC750 Wireless Dual Band Gigabit Router - 48 - If the numbers of connected wireless stations go beyond one page, click the Next button to go to the next page and click the Previous button to return the previous page.  Note: This page will be refreshed automatically every 5 seconds. 4.7 Wi...

Archer C2 AC750 Wireless Dual Band Gigabit Router - 52 - Figure 4-32 Figure 4-33 Add A New Device Step 2: Press and hold the WPS button of the client device directly. Step 3: The Wi-Fi Protected Setup LED flashes for two minutes during the Wi-Fi Protected Setup process. Step 4: When the WPS LED is o...

Archer C2 AC750 Wireless Dual Band Gigabit Router - 53 - Step 2: Enter the PIN number from the client device in the field on the above WPS screen. Then click Connect button. Step 3: “ Connect successfully ” will appear on the screen of Figure 4-34, which means the client device has successfully conn...

Archer C2 AC750 Wireless Dual Band Gigabit Router - 55 -  Note: If you check the WPA/WPA2-Personal radio button and choose TKIP encryption, you will find a notice in red as shown in Figure 4-36 . Figure 4-36 WPA/WPA2 – Personal  Wireless Password - You can enter ASCII characters between 8 and 63 c...

Archer C2 AC750 Wireless Dual Band Gigabit Router - 56 -  Radius Server Password - Enter the password for the Radius server.  Group Key Update Period - Specify the group key update interval in seconds. The value should be 30 or above. Enter 0 to disable the update.  WEP - It is based on the IEEE ...

Archer C2 AC750 Wireless Dual Band Gigabit Router - 59 - 4.7.5 Wireless Advanced Choose menu “ Wireless → Wireless Advanced ”, you can configure the advanced settings of your wireless network. Figure 4-41 Wireless Advanced  Transmit Power - Here you can specify the transmit power of router. You can...

Archer C2 AC750 Wireless Dual Band Gigabit Router - 61 -  Note: This page will be refreshed automatically every 5 seconds. 4.8 Guest Network Choose “ Guest Network ”, and you can configure the Guest Network Wireless Settings on the page as shown in Figure 4-43. Figure 4-43 Guest Network Wireless Se...

Archer C2 AC750 Wireless Dual Band Gigabit Router - 62 -  Allow Guest To Access My Local Network - If enabled, guests can communicate with hosts.  Allow Guest To Access My USB Storage Sharing - If enabled, guests can access to USB storage sharing servers.  Guest Network Isolation -. If enabled, g...

Archer C2 AC750 Wireless Dual Band Gigabit Router - 64 - 4.9.2 DHCP Clients List Choose menu “ DHCP → DHCP Clients List ”, you can view the information about the clients attached to the router in the screen as shown in Figure 4-46. Figure 4-46 DHCP Clients List  Client Name - The name of the DHCP c...

Archer C2 AC750 Wireless Dual Band Gigabit Router - 66 - 4.10 USB Settings Figure 4-49 The USB Settings menu There are six submenus under the USB Settings menu (shown in Figure 4-49): USB Mass Storage , User Accounts , Storage Sharing , FTP Server , Media Server and Print Server and. Click any of th...

Archer C2 AC750 Wireless Dual Band Gigabit Router - 68 - 1. Please restart the service for the new settings to take effect. 2. If you cannot use the new user name and password to access the shares, press Windows logo + R to open the Run dialog box and type net use \\192.168.1.1 /delete /yes and pres...

Archer C2 AC750 Wireless Dual Band Gigabit Router - 70 - 4.10.4 FTP Server Choose menu “ USB Settings → FTP Server ”, you can create an FTP server that can be accessed from the Internet or your local network. Figure 4-54 FTP Server Configuration  Server Status - Indicates the FTP Server's current s...

Archer C2 AC750 Wireless Dual Band Gigabit Router - 71 - 6. Click the Apply button to start the ftp server. To add a new folder, follow the instructions below. 1. Click Add New Folder in Figure 4-54. Figure 4-55 Add or Modify Share Folder 2. Enter display name of the share folder in Shared Name file...

Archer C2 AC750 Wireless Dual Band Gigabit Router - 73 - Figure 4-58 Add New Folder  Share Name - You can enter a display name for the share folder.  Directory - Displays the location of this folder.  Browse – Click the button to select the folder to share.  Apply - Click the button to save your...

Archer C2 AC750 Wireless Dual Band Gigabit Router - 75 - 4.12.1 Virtual Servers Choose menu “ Forwarding → Virtual Servers ”, and then you can view and add virtual servers on this page (shown in Figure 4-62). Virtual servers can be used for setting up public services on your LAN. A virtual server is...

Archer C2 AC750 Wireless Dual Band Gigabit Router - 76 - 4. Select the protocol used for this application in the Protocol drop-down list, either TCP , UDP , or All . 5. Select the Enabled option in the Status drop-down list. 6. Click the Save button. Figure 4-63 Add or Modify a Virtual Server Entry ...

Archer C2 AC750 Wireless Dual Band Gigabit Router - 78 - Figure 4-65 Add or Modify a Triggering Entry To modify or delete an existing entry: 1. Find the desired entry in the table. 2. Click Edit or Delete as desired on the Edit column. Click the Enable Selected button to make selected entries enable...

Archer C2 AC750 Wireless Dual Band Gigabit Router - 79 - DHCP client function disabled and should have a new static IP Address assigned to it because its IP Address may be changed when using the DHCP function. Figure 4-66 DMZ To assign a computer or server to be a DMZ server: 1. Click the Enable but...

Archer C2 AC750 Wireless Dual Band Gigabit Router - 80 -  External Port - The port which the router opened for the application.  Protocol - The type of protocol which is opened.  Internal Port - The port which the router opened for local host.  IP Address - The IP address of the local host which...

Archer C2 AC750 Wireless Dual Band Gigabit Router - 82 - the use of cryptographic security services. To allow IPSec tunnels to pass through the router, click Enable .  ALG - It is recommended to enable Application Layer Gateway (ALG) because ALG allows customized Network Address Translation (NAT) t...

Archer C2 AC750 Wireless Dual Band Gigabit Router - 83 -  Note: Dos Protection will take effect only when the Traffic Statistics in “ System Tool → Statistics ” is enabled.  Enable ICMP-FLOOD Attack Filtering - Enable or Disable the ICMP-FLOOD Attack Filtering.  ICMP-FLOOD Packets Threshold (5~36...

Archer C2 AC750 Wireless Dual Band Gigabit Router - 84 - Figure 4-71 Local Management By default, the radio button “ All the PCs on the LAN are allowed to access the Router's Web-Based Utility ” is checked. If you want to allow PCs with specific MAC Addresses to access the Setup page of the router's...

Archer C2 AC750 Wireless Dual Band Gigabit Router - 85 - Figure 4-72 Remote Management  Web Management Port - Web browser access normally uses the standard HTTP service port 80. This router's default remote management web port number is 80. For greater security, you can change the remote management...

Archer C2 AC750 Wireless Dual Band Gigabit Router - 86 - Figure 4-73 Parent Control Settings  Parent Control - Check Enable if you want this function to take effect; otherwise, check Disable .

Archer C2 AC750 Wireless Dual Band Gigabit Router - 88 - Figure 4-74 Parent Control Settings 4.15 Access Control Figure 4-75 Access Control

Archer C2 AC750 Wireless Dual Band Gigabit Router - 89 - There are four submenus under the Access Control menu: Rule , Host , Target and Schedule (as shown in Figure 4-75). Click any of them, and you will be able to configure the corresponding function. 4.15.1 Rule Choose menu “ Access Control → Rul...

Archer C2 AC750 Wireless Dual Band Gigabit Router - 91 - 4. Click the submenu Target of Access Control in the left to enter the Target List page. Add a new entry with the Target Description is Target_1 and Domain Name is www.google.com. 5. Click the submenu Schedule of Access Control in the left to ...

Archer C2 AC750 Wireless Dual Band Gigabit Router - 93 - 1. Click Add New button in Figure 4-78 to enter the Add or Modify a Host Entry page. 2. In Mode field, select MAC Address from the drop-down list. 3. In Description field, create a unique description for the host (e.g. Host_1). 4. In MAC Addre...

Archer C2 AC750 Wireless Dual Band Gigabit Router - 96 - 4.15.4 Schedule Choose menu “ Access Control → Schedule ”, and then you can view and set a Schedule list in the next screen as shown in Figure 4-85. The Schedule list is necessary for the Access Control Rule. Figure 4-85 Schedule Settings  De...

Archer C2 AC750 Wireless Dual Band Gigabit Router - 97 - Figure 4-86 Advanced Schedule Settings For example : If you desire to restrict the internet activities of host with MAC address 00:11:22:33:44:AA to access www.google.com only from 18:00 to 20:00 on Saturday and Sunday , you should first follo...

Archer C2 AC750 Wireless Dual Band Gigabit Router - 98 - There are two submenus under the Advanced Routing menu as shown in Figure 4-87: Static Route List and System Routing Table . Click any of them, and you will be able to configure the corresponding function. 4.16.1 Static Route List Choose menu ...

Archer C2 AC750 Wireless Dual Band Gigabit Router - 99 - 3. Select Enabled or Disabled for this entry on the Status drop-down list. 4. Click the Save button to make the entry take effect. Other configurations for the entries: Click the Delete button to delete the entry. Click the Enable Selected but...

Archer C2 AC750 Wireless Dual Band Gigabit Router - 100 - 4.17 Bandwidth Control Figure 4-91 Bandwidth Control Choose menu “ Bandwidth Control ”, and then you can configure the bandwidth control in the screen as shown in Figure 4-91 . You can configure the Egress Bandwidth and Ingress Bandwidth in t...

Archer C2 AC750 Wireless Dual Band Gigabit Router - 101 - 1. Click Add New shown in Figure 4-91, you will see a new screen shown in Figure 4-92. 2. Enter the information like the screen shown below. Figure 4-92 Bandwidth Control Rule Settings 3. Click the Save button. 4.18 IP & MAC Binding Figur...

Archer C2 AC750 Wireless Dual Band Gigabit Router - 102 -  MAC Address - The MAC address of the controlled computer in the LAN.  IP Address - The assigned IP address of the controlled computer in the LAN.  Bind - Check this option to enable ARP binding for a specific device.  Edit - To edit or d...

Archer C2 AC750 Wireless Dual Band Gigabit Router - 103 - Figure 4-96 ARP List 1. MAC Address - The MAC address of the controlled computer in the LAN. 2. IP Address - The assigned IP address of the controlled computer in the LAN. 3. Status - Indicates whether or not the MAC and IP addresses are boun...

Archer C2 AC750 Wireless Dual Band Gigabit Router - 104 - Figure 4-97 No-ip.com DDNS Settings To set up for DDNS, follow these instructions: 1. Enter the Domain Name you received from dynamic DNS service provider. 2. Enter the UserName for your DDNS account. 3. Enter the Password for your DDNS accou...

Archer C2 AC750 Wireless Dual Band Gigabit Router - 108 - 4.20.2 IPv6 WAN Figure 4-102 Enable/Disable IPv6  Connection Type - Choose the correct WAN connection type based on your ISP network topology.  Dynamic IPv6 - Connections which use dynamic IPv6 address assignment.  Static IPv6 - Connection...

Archer C2 AC750 Wireless Dual Band Gigabit Router - 113 - 4.21 System Tools Figure 4-108 The System Tools menu Choose menu “ System Tools ”, and you can see the submenus under the main menu: Time Settings , Diagnostic , Firmware Upgrade , Factory Defaults , Backup & Restore , Reboot , Password ,...

Archer C2 AC750 Wireless Dual Band Gigabit Router - 115 - Figure 4-110 Time settings  Note: 1. This setting will be used for some time-based functions such as firewall. You must specify your time zone once you login to the router successfully, otherwise, these functions will not take effect. 2. The...

Archer C2 AC750 Wireless Dual Band Gigabit Router - 116 -  Diagnostic Tool - Check the radio button to select one diagnostic too.  Ping - This diagnostic tool troubleshoots connectivity, reachability, and name resolution to a given host or gateway.  Traceroute - This diagnostic tool tests the per...

Archer C2 AC750 Wireless Dual Band Gigabit Router - 117 - 4.21.3 Firmware Upgrade Choose menu “ System Tools → Firmware Upgrade ”, and then you can update the latest version of firmware for the router on the following screen. Figure 4-113 Firmware Upgrade  Firmware Version - Displays the current fi...

Archer C2 AC750 Wireless Dual Band Gigabit Router - 118 - 4.21.4 Factory Defaults Choose menu “ System Tools → Factory Defaults ”, and then and you can restore the configurations of the router to factory defaults on the following screen Figure 4-114 Restore Factory Default Click the Restore button t...

Archer C2 AC750 Wireless Dual Band Gigabit Router - 119 -  Click the Restore button to update the configuration with the file whose path is the one you have input or selected in the blank.  Note: The current configuration will be covered with the uploading configuration file. Wrong process will le...

Archer C2 AC750 Wireless Dual Band Gigabit Router - 120 - Figure 4-117 Password It is strongly recommended that you should change the factory default user name and password of the router, because all users who try to access the router's Web-based utility or Quick Setup will be prompted for the route...

Archer C2 AC750 Wireless Dual Band Gigabit Router - 121 -  Log Settings - Click to change the log settings . 4.21.9 Statistics Choose menu “ System Tools → Statistics ”, and then you can view the statistics of the router, including total traffic and current traffic of the last Packets Statistic Int...

Archer C2 AC750 Wireless Dual Band Gigabit Router - 123 - 4.22 Logout Choose ” Logout ”, and you will be back to the login screen as shown in Figure 4-119. Figure 4-119 Logout

Archer C2 AC750 Wireless Dual Band Gigabit Router - 124 - Appendix A: FAQ 1. How do I configure the router to access Internet by ADSL users? 1) First, configure the ADSL Modem configured in RFC1483 bridge model. 2) Connect the Ethernet cable from your ADSL Modem to the Internet port on the router. T...

Archer C2 AC750 Wireless Dual Band Gigabit Router - 127 - Figure A-7 Basic Security 4. I want to build a WEB Server on the LAN, what should I do? 1) Because the WEB Server port 80 will interfere with the WEB management port 80 on the router, you must change the WEB management port number to avoid in...

Archer C2 AC750 Wireless Dual Band Gigabit Router - 131 - Appendix C: Specifications General Standards IEEE 802.11ac, IEEE 802.11n, IEEE 802.11g, IEEE 802.11b, IEEE 802.11a, IEEE 802.11e, IEEE 802.11i, IEEE 802.1X, IEEE 802.3X, IEEE 802.3, IEEE 802.3u, IEEE 802.3ab Protocols TCP/IP, PPPoE, DHCP, ICM...