TOA C-CV24-2 NTSC - Manuals

Page 2 - SAFETY PRECAUTIONS; • After reading, keep this manual handy for future reference.; Safety Symbol and Message Conventions; the user may be required to take adequate measures.; WARNING; outlet in order to avoid electric shock or fire.; CAUTION

2 1. SAFETY PRECAUTIONS • Before installation or use, be sure to carefully read all the instructions in this section in order to ensure long, trouble-free operation. • Be sure to follow all the precautionary instructions in this section, which contain important warnings regarding safety. • After rea...

Page 3 - condensation is formed.

3 2. GENERAL DESCRIPTION The C-CV24-2 Color Dome Camera is an indoor-use camera and is equipped with a high-resolution cameraand lens. It is designed to operate on 24 V AC or 12 V DC, which are supplied by an external power supplyunit. Since its 2X vari-focal, auto-iris lens is built inside the came...

Page 4 - [Side view of the camera with a dome cover]

- + 2 1 DC12V IN AC24V IN 1 2 3 4 5 6 7 8 9 10 11 IRIS F.ADJ BLC 1/60 1/100 OFF ON 4 (1) Power input terminal (24 V AC or 12 V DC) (2) Video output terminal (3) Monitor output terminal (RCA pin jack) (4) Mode setting switch (5) Iris control (6) Vari-focal lens (7) Zoom ring (8) Zoom ring fixing scre...

Page 5 - Coaxial Cable Preparation and Termination

5 13 8 13 10 13 8 30 mm 20 mm Camera direction Camera mounting hole Camera outside diameterØ118 mm Cable entry holeØ35 mm Cut out using a pair of nippers. 5. INSTALLATION 5.1. Coaxial Cable Preparation and Termination 3C-2V Type1. Strip the cable jacket 13 mm from the cable end. 2. Fold back the shi...

Page 6 - mark Camera head assembly

6 mark Camera output terminal Coaxial cable Power supply cable Power input terminal Camera direction Rotate the inner cover to the "R" range, and align the mark with scale indicator "3." Inner cover mark Mounting screws NoteEnsure that the mounting screws are set securelyin their cor...

Page 7 - Inner Cover Adjustment; Hold the dome cover so that the

7 Inner Cover Adjustment Note: Take care not to touch the dome cover window (transparent section) during adjustment. 1. Hold the dome cover so that the mark is positioned as shown in the figure below. 2. Rotate the dome inner cover with the thumbs of both hands to align the scale.3. Attach the dome ...

Page 8 - mark and then rotating the cover clockwise.; Note: If the Video output is not terminated at 75; , video pictures are not properly displayed.

8 mark Alignment mark Alignment mark • Ceiling mounting : Align the front alignment mark with the camera’s mark.• Wall mounting : Align the rear alignment mark with the camera’s mark. Dome cover external view (as supplied from the factory) Camera window Rear alignment mark Front alignment mark - + 2...

Page 9 - Switch on the camera power after completing camera connections.

9 Vertical rotation ± 70º Picture tilting ± 90º Horizontal rotation ± 65º Zoom ring fixing screw Focus ring fixing screw Vari-focal lens Zoom ring Focus ring 7. ADJUSTMENT 1. Switch on the camera power after completing camera connections. Power is supplied to the camera. 2. Normally,set the Shutter ...

Page 10 - ABOUT THE MODE SETTING SWITCH; Adjustment switch is set to ON.

10 Mode Setting Switch(Factory-preset setting) OFF ON Adjustment switch Backlight Compensation switch Shutter Speed switch IRIS F.ADJ BLC 1/60 1/100 OFF ON (NTSC) 1/60 1/100(PAL) 1/50 1/120 OFF ON OFF ON OFF ON OFF ON OFF ON OFF ON 8. ABOUT THE MODE SETTING SWITCH Set the Mode Setting switch for the...