TOA H-1 - Manual
TOA H-1 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – SAFETY PRECAUTIONS; Safety Symbol and Message Conventions; WARNING; CAUTION; When the Unit is in Use
- Page 3 – GENERAL DESCRIPTION; ensures powerful sound reproduction.; applications. For low-impedance applications, either the 4; can be easily changed from outside the unit.; HANDLING PRECAUTIONS; CRTs to avoid degradation in picture quality.
- Page 4 – For mounting to the Adapter Panel
- Page 5 – Direct Wall/Ceiling Mounting Without Using an Electrical Box; Step 1. Adapter Panel mounting; -1. Using the supplied hole pattern sheet as a guide,
- Page 6 – Step 2. Wiring and impedance changes; -3. Insert the stripped cable ends into the input; Note; vibration or rattling noise.; connections
- Page 7 – Impedance selector socket; Step 3. Mounting the speaker and Trim Piece; A d a p t e r Panel mounting tabs, then mount the; Adapter Panel
- Page 8 – Tip; angles at 15 ° intervals, use this marking as a guide; the speaker's two stud screws, then push the Trim; Trim Piece; Memo; Electrical box; Adapter Panel
- Page 9 – Mounting the Speaker Directly to an Electrical Box; Electrical box mounting screws are; When removing the Trim Piece for maintenance or repair,; Trim Piece and wall/ceiling, then insert a screwdriver blade; Caution; If you raise either right or left side of the Trim Piece by
- Page 10 – REPAINTING THE GRILLE AND TRIM PIECE; Follow the procedures below to change the color of the; Paint both the grille and Trim Piece.; Notes; After the paint has dried, remount the grille to the
- Page 11 – PROTECTION CIRCUITRY INFORMATION; and cuts off the signal input to the speaker component.; Important Note; as shown below, sounds can be made more powerful and intelligible.; PEQ
- Page 12 – • Accessories; Pattern paper; Printed in Japan; TOA Corporation; Rated Input
OPERATING INSTRUCTIONS
H-1
SPEAKER SYSTEM
Please follow the instructions in this manual to obtain the optimum results from this unit.
We also recommend that you keep this manual handy for future reference.
TABLE OF CONTENTS
1. SAFETY PRECAUTIONS
2. GENERAL DESCRIPTION
3. FEATURES
4. HANDLING PRECAUTIONS
5. NOMENCLATURE
6. INSTALLATION
6.1. Direct Wall/Ceiling Mounting Without Using an Electrical Box
6.2. Mounting the Speaker to an Electrical Box Using The Adapter Frame
6.3. Mounting the Speaker Directly to an Electrical Box
6.4. Removing the Trim Piece
7. REPAINTING THE GRILLE AND TRIM PIECE
8. PROTECTION CIRCUITRY INFORMATION
9. EQUALIZATION
10. SPECIFICATIONS
Accessories
TOA Corporation
2
3
3
3
4
5
8
9
9
10
11
12
12
12
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
1. SAFETY PRECAUTIONS • Be sure to read the instructions in this section carefully before use. • Make sure to observe the instructions in this manual as the conventions of safety symbols and messages regarded as very important precautions are included. • We also recommend you keep this instruction m...
2. GENERAL DESCRIPTION TOA's H-1 is a cylinder-shaped, small flush-mount 2-way speaker featuring high sound quality. 3. FEATURES • The H-1 Speaker System features, flush-mount speaker design with a rotatable cylinder-type enclosure. The speaker's smooth curved surface allows it to blend in with the ...
5. NOMENCLATURE [Side Panel] [Front Panel] [Side Panel] H-1 speaker Grille Trim Piece [Side Panel] [Rear Panel] For mounting to the Adapter Panel Mounting bracket For mounting to an electrical box Accessory (Adapter Panel) 4
