Titan ED655 - Manuals

Titan ED655 – Manual in PDF format online.

Manuals:

Manual

Manual Titan ED655

Summary

Page 2 - Important Safety Information; Read all safety information before; a) To reduce the risks of fire or explosion, electrical; Grounding Instructions; b) WARNING - To reduce the risk of fire or

2 © Titan Tool Inc. All rights reserved. Important Safety Information · Read all safety information before operating the equipment. SavE ThESE INSTRucTIONS. This symbol indicates a hazardous situation, which, if not not avoided could result in death or serious injury. a) To reduce the risks of fire ...

Page 3 - Important Electrical Information; Specifications

© Titan Tool Inc. All rights reserved. 3 Important Safety Information · Read all safety information before operating the equipment. SavE ThESE INSTRucTIONS. 8. Check hoses and parts for signs of damage, a leak can inject material into the skin. Inspect hose before each use. Replace any damaged hoses...

Page 4 - Table of contents; General Description; attaching the Tip to the Gun; POSSIBLE INJECTION HAZARD. Do not spray; NOTE: when attaching the tip guard to the gun, align; Pusher Valve Button

4 © Titan Tool Inc. All rights reserved. Table of contents Safety Precautions ................................................................... 2 Grounding Instructions ........................................................ 3 General Description .....................................................

Page 5 - attaching the Paint hose; Pressure Relief Procedure; Priming; Preparing to Prime

© Titan Tool Inc. All rights reserved. 5 attaching the Paint hose 1. Attach the high pressure hose to the paint sprayer. Use a wrench to tighten the paint hose securely. 2. Attach the spray gun to the other end of the high pressure hose. Tighten the hose securely to the gun using two wrenches. 3. Pl...

Page 6 - mounting the Paint hopper; attaching the Return Tube; Priming the Pump; changing the position of the PRIME/SPRAY knob. Failure to

6 © Titan Tool Inc. All rights reserved. mounting the Paint hopper 1. Align the bottom of the paint hopper with the threaded inlet valve on the paint pump block. 2. Turn the paint hopper clockwise to thread it onto the inlet valve. Continue to turn the paint hopper until it is secure on the inlet va...

Page 7 - Spraying; Spraying Technique; Practice

© Titan Tool Inc. All rights reserved. 7 Spraying Spraying Technique The key to a good paint job is an even coating over the entire surface. This is done by using even strokes. Keep your arm moving at a constant speed and keep the spray gun at a constant distance from the surface. The best spraying ...

Page 8 - cleanup; Overnight Storage; Shutdown; Startup; NOTE: If spraying with latex paint, use warm soapy; clearing the Paint hopper; clearing the Paint hose

8 © Titan Tool Inc. All rights reserved. cleanup Overnight Storage Shutdown 1. Turn the pressure control knob counterclockwise to the minimum setting. 2. Turn the PRIME/SPRAY knob to PRIME to release system pressure. 3. Trigger the gun to remove any pressure that may still be in the hose. Trigger lo...

Page 9 - NOTE: Proper cleaning and oiling of the pump after use

© Titan Tool Inc. All rights reserved. 9 6. Turn the pressure control knob counterclockwise to its lowest setting. 7. Turn the PRIME/SPRAY knob to PRIME. 8. Trigger the gun to remove any pressure which may still be in the hose. 9. Lock the gun trigger by rotating the trigger lock forward until it st...

Page 10 - maintenance; Removing and cleaning the Inlet valves; the next time the sprayer is used.; Removing and cleaning the Outlet valve; NOTE: This spring is manufactured to a very specific; cleaning the hopper Screen

10 © Titan Tool Inc. All rights reserved. maintenance Follow these procedures when encountering problems indicated in the troubleshooting section. Removing and cleaning the Inlet valves 1. Be certain that the sprayer is off. 2. Remove the inlet valve assembly using a 27 millimeter socket or box end ...

Page 11 - Troubleshooting; valve and clean or replace it.

© Titan Tool Inc. All rights reserved. 11 Problem A. The sprayer does not start up. B. The sprayer starts up but does not draw in paint when the PRIME/SPRAY knob is set to PRIME. C. The sprayer draws up paint but the pressure drops when the gun is triggered. D. The sprayer will not shut off. E. The ...

Page 12 - Français; consignes de sécurite important; Lire toutes ces consignes avant; a) Pour réduire les risques d’incendie ou d’explosion,; Directives de mise à la terre; correctement la fiche trifilaire de l’appareil peut; risque d’incendie ou d’explosion :

Français 12 © Titan Tool Inc. Tous droits réservés. consignes de sécurite important · Lire toutes ces consignes avant d’utiliser l’appareil. GaRDER cES cONSIGNES. Indique une situation à risque, laquelle, si elle n’est pas évitée, peut entraîner des blessures graves, voire la mort. a) Pour réduire l...

Page 13 - retarder ce traitement sous prétexte de vérifier la toxicité; Renseignements importants sur

Français © Titan Tool Inc. Tous droits réservés. 13 consignes de sécurite important · Lire toutes ces consignes avant d’utiliser l’appareil. GaRDER cES cONSIGNES. libérée par l’arrêt du moteur. La poignée du robinet-valve PRIME/SPRAY (AMORÇAGE/ PULVÉRISATION) doit être placée sur PRIME pour libérer ...

Page 14 - Español; Información de seguridad importante; Lea toda la información de; manual. Familiarícese con los controles y el uso; Instrucciones para la conexión a tierra; de incendio o explosión:

Español 14 © Titan Tool Inc. Todos los derechos reservados. Información de seguridad importante · Lea toda la información de seguridad antes de operar el equipo. GuaRDE ESTaS INSTRuccIONES. Indica una situación peligrosa que, de no evitarse, puede causar la muerte o lesiones graves. a) Para reducir ...

Page 15 - Información eléctrica importante

Español © Titan Tool Inc. Todos los derechos reservados. 15 Información de seguridad importante · Lea toda la información de seguridad antes de operar el equipo. GuaRDE ESTaS INSTRuccIONES. que poner la manija de la válvula PRIME/SPRAY (cebar/ pulverizar) en PRIME. Consulte el Procedimiento de Alivi...

Page 16 - Parts Listing; main assembly; Item

16 © Titan Tool Inc. All rights reserved. Parts Listing main assembly 1 2 3 4 10 11 12 13 14 1516 8 9 5 6 7 Item Part No. Description qty. 1 0288144 Hopper assembly 1 2 9801533 Carriage bolt 4 3 ---------- Pump head assembly 1 4 0555124 Diaphragm pump 1 5 0508271 Left leg 1 6 0551525 Plug 2 7 055551...

Page 18 - hopper assembly

18 © Titan Tool Inc. All rights reserved. Pump head assembly 2 1 3 5 6 7 8 9 10 11 4 12 13141516 Item Part No. Description qty. 1 0278242 Inlet valve assembly (includes item 2) 1 2 0089482 Sealing washer, nylon 1 3 0278334 Paint pump 1 4 0555850 PRIME/SPRAY valve assembly 1 5 0278362 Outlet seal 1 6...

Page 19 - Notes

Page 20 - warranty; Patents; United States Sales & Service; Canadian Branch

20 © Titan Tool Inc. All rights reserved. warranty Titan Tool, Inc., (“Titan”) warrants that at the time of delivery to the original purchaser for use (“End User”), the equipment covered by this warranty is free from defects in material and workmanship. With the exception of any special, limited, or...