Titan 766-4070 - Manuals

Titan 766-4070 – Manual in PDF format online.

Manuals:

Manual

Manual Titan 766-4070

Summary

Page 2 - Important Safety Information; Read all safety information before

2 © Titan Tool Inc. All rights reserved. This symbol indicates a hazardous situation,which, if not not avoided could result in death orserious injury. To reduce the risks of fire or explosion, electricalshock and the injury to persons, read and under-stand all instructions included in this manual. B...

Page 3 - Grounding Instructions; Specifications

© Titan Tool Inc. All rights reserved. 3 HAZARD: EXPLOSION HAZARD DUE TO INCOMPATIBLE MATERIALS Will cause property damage or severe injury. PREVENTION: • Do not use materials containing bleach or chlorine.• Do not use halogenated hydrocarbon solvents such as bleach, mildewcide, methylene chloride a...

Page 4 - Setup; Preparing a New Sprayer

Table of Contents Safety Precautions .................................................................2General Description ...............................................................4Operation ................................................................................4 Setup ..................

Page 6 - Pressure Relief Procedure; Spraying; Spraying Technique

Pressure Relief Procedure Be sure to follow the pressure relief procedurewhen shutting the unit down for any purpose,including servicing or adjusting any part of thespray system, changing or cleaning spray tips, orpreparing for cleanup. 1. Lock the gun by turning the gun trigger lock to the locked p...

Page 7 - Practice; Cleanup; Cleaning the Spray Tip

Practice 1. Be sure that the paint hose is free of kinks and clear of objects with sharp cutting edges. 2. Turn the pressure control knob counterclockwise to its to its lowest setting. 3. Turn the PRIME/SPRAY valve up to its SPRAY position.4. Turn the pressure control knob clockwise to its highest s...

Page 8 - Maintenance; General Repair and Service Notes; Replacing the Motor Brushes

Maintenance Before proceeding, follow the Pressure ReliefProcedure outlined previously in this manual.Additionally, follow all other warnings to reducethe risk of an injection injury, injury from movingparts or electric shock. Always unplug thesprayer before servicing! General Repair and Service Not...

Page 9 - Replacing the Transducer; Replacing the PRIME/SPRAY Valve

Replacing the Transducer 1. Loosen and remove the four front cover screws. Remove the front cover. 2. Stop the sprayer at the bottom of its stroke so that the piston is in its lowest position. Turn off and unplug thesprayer. Before proceeding, follow the Pressure ReliefProcedure outlined previously ...

Page 10 - Servicing the Fluid Section; Servicing the Valves; Repacking the Fluid Section

Servicing the Fluid Section Use the following procedures to service the valves and repackthe fluid section. Perform the following steps beforeperforming any maintenance on the fluid section. 1. Loosen and remove the four front cover screws. Remove the front cover. 2. Stop the sprayer at the bottom o...

Page 11 - Replacing the Filters; Pump Filter; Gun Filter

15. Position the pump block underneath the pump housing and push up until it rests against the pump housing. 16. Thread the pump block mounting screws through the pump block and into the pump housing. Tighten securely. 17. Reassemble the foot valve assembly into the pump block.18. Insert the elbow o...

Page 12 - Solution; Cause; Troubleshooting; Problem

Solution 1. Plug the sprayer in.2. Reset the breaker.3. Turn the pressure control knob clockwise to supply power to the sprayer and increasethe pressure setting. 4. Inspect or take to a Titan authorized service center. 5. Allow motor to cool.6. Replace the ON/OFF switch. 1. Rotate the PRIME/SPRAY va...

Page 14 - Français; Importantes consignes de sécurité; • Lire toutes ces consignes

14 © Titan Tool Inc. Tous droits réservés. Français Importantes consignes de sécurité • Lire toutes ces consignes avant d’utiliser l’appareil. Garder ces consignes. Indique une situation à risque, laquelle, si elle n'est pasévitée, peut entraîner des blessures graves, voire lamort. Pour réduire les ...

Page 15 - Instructions de mise à la terre

© Titan Tool Inc. Tous droits réservés. 15 Français Importantes consignes de sécurité • Lire toutes ces consignes avant d’utiliser l’appareil. Garder ces consignes. DANGER : EXPLOSION CAUSÉE PAR DES PRODUITSINCOMPATIBLES Ce type d’explosion peut entraîner des dommages matérielsou des blessures grave...

Page 16 - Español; Información de seguridad importante; • Lea toda la información de

16 © Titan Tool Inc. Todos los derechos reservados. Español Información de seguridad importante • Lea toda la información de seguridad antes de operar el equipo. Guarde estas instrucciones. Indica una situación peligrosa que, de no evitarse,puede causar la muerte o lesiones graves. Para reducir los ...

Page 17 - Instrucciones para conectar a tierra

© Titan Tool Inc. Todos los derechos reservados. 17 Español Información de seguridad importante • Lea toda la información de seguridad antes de operar el equipo. Guarde estas instrucciones. PELIGRO: POSIBLE EXPLOSIÓN DEBIDO AMATERIALES INCOMPATIBLES Causará daños materiales o lesiones graves. PREVEN...

Page 18 - Parts List; Main Assembly

18 © Titan Tool Inc. All rights reserved. Parts List Main Assembly 1 2 3 5 6 7 4 8 9 10 11 5 Item Part # Description Quantity 1 704-181 Screw ..........................................................4 2 766-232 Motor cover .................................................1 3 ---------- Motor assemb...

Page 20 - Gear Box Assembly

Page 21 - Stand Assembly

© Titan Tool Inc. All rights reserved. 21 Item Part # Description Quantity 1 700-139 Screw ........................................................10 2 704-019 Front cover..................................................1 3 704-173 Crankshaft/gear assembly ..........................1 4 704-174 Thru...

Page 23 - Accessories; Airless Tip Selection; Piston Lube; Labels

© Titan Tool Inc. All rights reserved. 23 Item Part # Description Quantity 1 766-274 Fluid section, bare (excludes items 22–36) .1 2 704-552 Piston assembly (includes items 9–14) ......1 3 730-508 Retainer ......................................................1 4 700-587 Piston guide ..................

Page 24 - International; Patents; Warranty

24 © Titan Tool Inc. All rights reserved. United States Sales & Service 1-800-526-5362 Fax 1-800-528-4826 107 Bauer Drive Oakland, NJ 07436 www.titantool.com Canadian Branch 1-800-565-8665 Fax 1-905-856-8496 200 Trowers Road, Unit 7B Woodbridge, Ontario L4L 5Z8 International 1-201-337-1240 Fax 1...