Titan 700-3035 - Manuals

Titan 700-3035 – Manual in PDF format online.

Manuals:

Manual

Manual Titan 700-3035

Summary

Page 2 - Important Safety Information; Read all safety information before

2 © Titan Tool Inc. All rights reserved. This symbol indicates a hazardous situation,which, if not not avoided could result in death orserious injury. To reduce the risks of fire or explosion, electricalshock and the injury to persons, read and under-stand all instructions included in this manual. B...

Page 3 - Grounding Instructions; Specifications

© Titan Tool Inc. All rights reserved. 3 HAZARD: EXPLOSION HAZARD DUE TO INCOMPATIBLE MATERIALS Will cause property damage or severe injury. PREVENTION: • Do not use materials containing bleach or chlorine.• Do not use halogenated hydrocarbon solvents such as bleach, mildewcide, methylene chloride a...

Page 4 - Setup; Preparing a New Sprayer

Table of Contents Safety Precautions .................................................................2Specifications .........................................................................3General Description ...............................................................4Operation .................

Page 5 - Preparing to Paint; Painting

Preparing to Paint Before painting, it is important to make sure that the fluid in thesystem is compatible with the paint that is going to be used. IMPORTANT: Always keep the trigger lock on the spraygun in the locked position while preparing the system. 1. Place the siphon tube into a container of ...

Page 6 - Function Keys

Pressure Indicator The pressure indicator shows the current operating pressure ofthe sprayer. It has three different indications: blinking yellow,solid yellow, and solid green. Blinking Yellow When the pressure indicator is blinking yellow, the sprayer isoperating between 0 and 200 PSI. A blinking y...

Page 7 - Pressure Relief Procedure

The Unit Serial # screenshows the sprayers serialnumber. To select the Unit Serial #screen, press the #4 key. Timers Screen The Timers screen shows thetotal time the sprayer has beenturned on as well as the totaltime the sprayer has been running (pumping). To select the Timers screen,press the #4 ke...

Page 8 - Spraying; Spraying Technique; Practice

Spraying POSSIBLE INJECTION HAZARD. Do not spraywithout the tip guard in place. Never trigger thegun unless the tip is in either the spray or theunclog position. Always engage the gun triggerlock before removing, replacing, or cleaning tip. Spraying Technique The following techniques, if followed, w...

Page 9 - Cleanup; Maintenance; General Repair and Service Notes

Cleanup Special cleanup instructions for use withflammable solvents: • Always flush spray gun preferably outside and at least one hose length from spray pump. • If collecting flushed solvents in a one gallon metal container, place it into an empty five gallon container, thenflush solvents. • Area mu...

Page 10 - Replacing the Motor; Replacing the Gears

Replacing the Motor 1. Perform the Pressure Relief Procedure and unplug the sprayer. 2. Loosen and remove the four motor cover screws. Remove the motor cover. 3. At the electronic pressure control (EPC) on the back off the motor, disconnect the wire coming from thepotentiometer and the wire coming f...

Page 12 - Servicing the Fluid Section; Servicing the Valves; Repacking the Fluid Section

Servicing the Fluid Section Use the following procedures to service the valves and repackthe fluid section. Perform the following steps beforeperforming any maintenance on the fluid section. 1. Loosen and remove the four front cover screws. Remove the front cover. 2. Stop the sprayer at the bottom o...

Page 13 - Replacing the Filters; Pump Filter; Gun Filter

14. Slide the top of the piston rod into the T-slot on the slider assembly. 15. Position the pump block underneath the pump housing and push up until it rests against the pump housing. 16. Thread the pump block mounting screws through the pump block and into the pump housing. Tighten securely. 17. R...

Page 14 - Troubleshooting; Solution; Cause

Troubleshooting 14 © Titan Tool Inc. All rights reserved. Solution 1. Plug the unit in.2. Reset the breaker.3. Turn the pressure control knob clockwise to supply power to the unit and increase thepressure setting. 4. Inspect or take to a Titan authorized service center. 5. Allow motor to cool.6. Rep...

Page 15 - Problem

© Titan Tool Inc. All rights reserved. 15 Troubleshooting Problem Poor spray pattern. The unit lacks power. Cause 1. The spray tip is too large for the material being used. 2. Incorrect pressure setting. 3. Insufficient fluid delivery.4. The material being sprayed is too viscous. 1. The pressure adj...

Page 16 - Français; Importantes consignes de sécurité; • Lire toutes ces consignes

16 © Titan Tool Inc. Tous droits réservés. Français Importantes consignes de sécurité • Lire toutes ces consignes avant d’utiliser l’appareil. Garder ces consignes. Indique une situation à risque, laquelle, si elle n'est pasévitée, peut entraîner des blessures graves, voire lamort. Pour réduire les ...

Page 17 - Instructions de mise à la terre

© Titan Tool Inc. Tous droits réservés. 17 Français Importantes consignes de sécurité • Lire toutes ces consignes avant d’utiliser l’appareil. Garder ces consignes. DANGER : EXPLOSION CAUSÉE PAR DES PRODUITSINCOMPATIBLES Ce type d’explosion peut entraîner des dommages matérielsou des blessures grave...

Page 18 - Español; Información de seguridad importante; • Lea toda la información de

18 © Titan Tool Inc. Todos los derechos reservados. Español Información de seguridad importante • Lea toda la información de seguridad antes de operar el equipo. Guarde estas instrucciones. Indica una situación peligrosa que, de no evitarse,puede causar la muerte o lesiones graves. Para reducir los ...

Page 19 - Instrucciones para conectar a tierra

© Titan Tool Inc. Todos los derechos reservados. 19 Español Información de seguridad importante • Lea toda la información de seguridad antes de operar el equipo. Guarde estas instrucciones. PELIGRO: POSIBLE EXPLOSIÓN DEBIDO AMATERIALES INCOMPATIBLES Causará daños materiales o lesiones graves. PREVEN...

Page 20 - Parts List; Main Assembly

Page 21 - Skid Assembly

© Titan Tool Inc. All rights reserved. 21 Item Part # Description Quantity 1 704-181 Screw (includes washer and grommet) ......4 2 704-232 Motor cover .................................................1 3 700-681 Screw ..........................................................4 4 704-499 Power cord (...

Page 23 - Drive Assembly

© Titan Tool Inc. All rights reserved. 23 Item Part # Description Quantity 1 730-508 Retainer nut ................................................1 2 700-587 Piston guide ................................................1 3 704-564 Upper packing assembly with tool ..............1 4 704-532 Pump block...

Page 24 - Electrical Schematic; Labels

24 © Titan Tool Inc. All rights reserved. Potentiometer Fuse Motor Transducer Transducer Jumper Plug WHITE WHITE WHITE BLACK BLACK GREEN Control Panel Board Surge Suppressor Electronic Pressure Control (EPC) J16 AC-Motor AC-Neut AC-Line AC-Motor J9 J2 J1 J12 J7 Switch Ground Electrical Schematic NOT...

Page 25 - Accessories

© Titan Tool Inc. All rights reserved. 25 Accessories Airless Tip Selection Tips are selected by the orifice size and fan width. The properselection is determined by the fan width required for a specificjob and by the orifice size that will supply the desired amountof fluid and accomplish proper ato...

Page 26 - Notes

Page 28 - Warranty; United States Sales & Service; International; Patents

Titan Tool, Inc., (“Titan”) warrants that at the time of delivery to the original purchaser for use (“End User”), the equipmentcovered by this warranty is free from defects in material and workmanship. With the exception of any special, limited, orextended warranty published by Titan, Titan’s obliga...