Taylor 1383 - Manuals - manualsarea.com

Page 2 - Set Current Weather Conditions; Up

Set Current Weather Conditions 1. After battery installation, the current weather icon flashes. 2. Press “ Up ” or “ Down ” to select the weather icon you believe most closely reflects the current conditions in your area. (Partly Cloudy is the default setting). 3. Press “ Time/Date ” to select the d...

Page 3 - Install Batteries into Remote Sensor; after

4. The selected weather icon appears on all screens. (The temperature and forecast readings update after remote sensor is added.) 3 Install Batteries into Remote Sensor *Important: Install the remote sensor batteries after installing the base unit batteries for proper signal connection. Remote senso...

Page 4 - Set Up Remote Sensor; SYNC

Set Up Remote Sensor 1. After installing the batteries into the base unit and the remote sensor, place the units close together for best setup connection. 2. Press the “ SYNC ” button on the back of the base unit to send a transmission signal to the remote sensor. Allow a few minutes for a connectio...

Page 5 - After the first 6 hours, when the units begin to forecast weather; 4 hour period, the screens will all show identical readings.

5 Only the current temperature will update during first 6 hours. Temperature forecasts and weather icons stay identical while analyzing 1st forecast . 5. After the first 6 hours, when the units begin to forecast weather conditions, all temperature and weather screens will update with new forecasts. ...

Page 6 - Reading the Weather Forecaster; To Set Clock and Date; Midday

Reading the Weather Forecaster 1) Current outdoor temperature at remote sensor location 2) Current outdoor humidity at remote sensor location 3) Current weather condition icon 4) Current indoor temperature 5) Clock/Date 6) Base unit low battery indicator 7) Transmission signal icon 8) Remote sensor ...

Page 7 - Additional Features; Low Battery Warning; Base unit; Backlight; Remote sensor; Tips

7 Additional Features 7 Low Battery Warning Base unit – replace both batteries when the “ ” icon appears on the right side of the screen. °C/°F Selection Press the “C/F” button on the back of the base unit to switch between Fahrenheit and Celsius temperatures. Backlight Press the Backlight button on...

Page 8 - Keyhole

Batteries: Lithium batteries are recommended for the remote sensor, since alkaline batteries may freeze or otherwise become damaged in extreme temperatures. The sensor will function with alkaline batteries, but are best suited for milder climates. (See Specifications.) Important: Though the remote u...

Page 9 - Display Information

Problem Solving 1. If the LCD readout is faint, replace the batteries. 2. If outdoor temperature does not display on the base unit: a) Press the “SYNC” button to trigger a signal from the base to the remote; b) Relocate remote sensor if it is obstructed from weather condi- tions or in contact with a...

Page 11 - Precautions

Precautions 1. Always read the instruction manual before operating this product. 2. The base unit is intended for indoor use only. It is not sealed against moisture and could be damaged if used outdoors. 3. Do not immerse the base unit in water. If you spill liquid on it, dry immediately with a soft...

Page 12 - Specifications; ° for temperature; One Year Limited Warranty

Specifications Range of temperature measurement: Base unit (indoor only): 14°F to 122°F (-10°C to 50°C) Remote sensor: With Lithium batteries: -4°F to 158°F (-20°C to 70°C) With Alkaline batteries: 14°F to 122°F (-10°C to 50°C) Resolution: 1° for temperature Outdoor Humidity: 20% - 99% RH Power: Bas...