Taylor 1383 - Manual
Taylor 1383 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Set Current Weather Conditions; Up
- Page 3 – Install Batteries into Remote Sensor; after
- Page 4 – Set Up Remote Sensor; SYNC
- Page 5 – After the first 6 hours, when the units begin to forecast weather; 4 hour period, the screens will all show identical readings.
- Page 6 – Reading the Weather Forecaster; To Set Clock and Date; Midday
- Page 7 – Additional Features; Low Battery Warning; Base unit; Backlight; Remote sensor; Tips
- Page 8 – Keyhole
- Page 9 – Display Information
- Page 11 – Precautions
- Page 12 – Specifications; ° for temperature; One Year Limited Warranty
Get actual current temperatures and predict the weather
conditions for the next 24 hours as well as your local television
weatherperson! Taylor uses the temperature and changes in
relative humidity levels to forecast the upcoming day. Plan the
day with confidence with Taylor
®
Today’s Weather.
Please read this instruction manual carefully before use and
keep these instructions handy.
Today’s Weather 24 Hour Forecaster
Instruction Manual
1383
Battery Power
2 AAA alkaline for base unit
(not included)
.
2 AAA lithium for remote sensor
(recommended, not included)
.
Remove the battery compartment cover
on the back of the
base unit. Install 2 AAA batteries according to the polarity
markings in the compartment and replace the cover.
*Important:
Install the base unit batteries first, before installing
the remote sensor batteries, for proper signal connection.
1
To Power and Set Up the Weather Forecaster
1
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
Set Current Weather Conditions 1. After battery installation, the current weather icon flashes. 2. Press “ Up ” or “ Down ” to select the weather icon you believe most closely reflects the current conditions in your area. (Partly Cloudy is the default setting). 3. Press “ Time/Date ” to select the d...
4. The selected weather icon appears on all screens. (The temperature and forecast readings update after remote sensor is added.) 3 Install Batteries into Remote Sensor *Important: Install the remote sensor batteries after installing the base unit batteries for proper signal connection. Remote senso...
Set Up Remote Sensor 1. After installing the batteries into the base unit and the remote sensor, place the units close together for best setup connection. 2. Press the “ SYNC ” button on the back of the base unit to send a transmission signal to the remote sensor. Allow a few minutes for a connectio...
