TANDBERG D13202 - Manuals

TANDBERG GW Dataport Command Interface User Guide D13202 Rev 01 5 2.2. Configuring The Dataport From The Web Interface Click on System Configuration tab and then the Dataport button. The Dataport can be configured by setting baudrate, parity, databits and stopbits. 2.3. Troubleshooting If communicat...

TANDBERG GW Dataport Command Interface User Guide D13202 Rev 01 6 3. Connecting to the Datport Command Interface using Telnet The TANDBERG GW has two LAN ports. Connection to the Dataport Command Interface via Telnet should be done through LAN port 1. The GW’s Telnet server provides access to the Da...

TANDBERG GW Dataport Command Interface User Guide D13202 Rev 01 7 4. The TANDBERG GW Commands 4.1. Introduction Typing ‘ ? ’ or ‘ help ’ when connected to the Dataport Command Interface will return a list of valid commands. The commands are used to control the functions of the GW. A command may be f...

TANDBERG GW Dataport Command Interface User Guide D13202 Rev 01 8 case where the user is trying to transfer a call from an inactive GW port (the user input is shown in bold). calltransfer 1 999999 *R Invalid gateway id ERROR Parameter Setting Commands are commands that set a system parameter to a sp...

TANDBERG GW Dataport Command Interface User Guide D13202 Rev 01 9 4.2.1. System Configuration Commands Command: Description: defvalues set This command is used to restore factory default settings. Issuing this command with no parameters will restore all settings except network settings and option ke...

TANDBERG GW Dataport Command Interface User Guide D13202 Rev 01 10 Example of ipaddress feedback: *P ipaddress 1 static 10.0.5.98 *P ipaddress 1 subnetmask 255.255.0.0 *P ipaddress 1 gateway 10.0.0.1 ipassignment Selects between DHCP (Dynamic Host Configuration Protocol) or static IP address allocat...

TANDBERG GW Dataport Command Interface User Guide D13202 Rev 01 11 best available setting. Example of ipspeed feedback: *P ipspeed 1 auto ipqos Configures the different Quality of Service (QoS) algorithms supported by the TANDBERG GW. QoS are used to set priority on QoS enabled IP networks. ipqos pr...

TANDBERG GW Dataport Command Interface User Guide D13202 Rev 01 15 o euro - Euro ISDN Example of prinet feedback: *P prinet att prinumbrange Defines the PRI number range for the various PRI interfaces. prinumbrange <PRI interface> <lowest number> <highest number> --- parameters: • ...

TANDBERG GW Dataport Command Interface User Guide D13202 Rev 01 17 Example of sport feedback: *P sport 9600 n 8 1 systemname Sets the GW name. systemname <name> --- Parameters: • name: Textstring of maximum 16 characters. Example of systemname feedback: *P systemname TANDBERG

TANDBERG GW Dataport Command Interface User Guide D13202 Rev 01 18 4.2.2. General GW Commands Command: Description: calltransfer Disconnects the h323 terminal of a GW call and reconnects to another h323 terminal, by either specifying a telephone number or by referring to a directory entry. calltrans...

TANDBERG GW Dataport Command Interface User Guide D13202 Rev 01 19 disc <gwid> --- parameters: • gwid: 1..16. Identifier referring to a GW call. gwdid Sets ISDN DID (Direct Inwards Dialling) parameters. When DID is enabled the GW will strip of the last digits in the ISDN incoming number and us...

TANDBERG GW Dataport Command Interface User Guide D13202 Rev 01 20 gwh323service <id> servprefix <e164prefix> or gwh323service <id> maxbw <bw> or gwh323service <id> isdncallprefix <callprefix> or gwh323service <id> restrict <on/off> or gwh323service &l...

TANDBERG GW Dataport Command Interface User Guide D13202 Rev 01 21 or gwsettings duovideo <on/off> or gwsettings encryption <on/off> sub-commands: • natvid : Sets natural video support to on or off. • customformats : Sets custom format support to on or off • duovideo : Sets duovideo supp...

TANDBERG GW Dataport Command Interface User Guide D13202 Rev 01 22 4.2.3. System Status Commands Command: Description: callhistory Used to list call related information for the last 20 calls. callhistory [logid] Status format: callhistory <logid> <logtag> <gwlogtag> <remote numb...

TANDBERG GW Dataport Command Interface User Guide D13202 Rev 01 23 chanstat Used to list channel status information for the PRI interface. chanstat [pri interface] [channel] Status format: chanstat <PRI interface> <channel> <channel-status> <calling-number> <causeLoc>:&...

TANDBERG GW Dataport Command Interface User Guide D13202 Rev 01 24 • h323 callid: The call id of the h323 terminal • h323 termnumber: The number of the h323 terminal Example of gwcalls feedback: *S gwcalls 1 1 22222222 2 66666666 h323gkstatus Returns current gatekeeper status. h323gkstatus Status fo...

TANDBERG GW Dataport Command Interface User Guide D13202 Rev 01 26 • PRI interface: a/b/c/d. Letters identifying the different PRI interfaces. o a : PRI interface 1 o b : PRI interface 2 o c : PRI interface 3 o d : PRI interface 4 • status: disabled / red alarm / blue alarm/ yellow alarm / synced / ...

TANDBERG GW Dataport Command Interface User Guide D13202 Rev 01 27 • vidres: unknown / cif / qcif / sqcif / 4cif / sif / 4sif / vga / svga / xga • duores: cif / qcif / sqcif / 4cif / sif / 4sif / vga / svga / xga Example of statout feedback: *S statout 1 outgoing synced norestrict h323-768 g722 h263...

TANDBERG GW Dataport Command Interface User Guide D13202 Rev 01 28 4.2.4. Debug Commands Command: Desription: eventlog The eventlog records all serious errors registered by the system. The log can be used to identify the cause for errors. The complete eventlog can be downloaded from the embedded FTP...

TANDBERG GW Dataport Command Interface User Guide D13202 Rev 01 31 4.3. Parameter Storage Parameters are set by issuing Parameter Setting Commands, ref. chapter 4.1.2 . All parameters and their corresponding storage type are listed in the table below. The following definitions are used: level 0: No ...