Symbol PL460 - Manuals

6 PL360/460 Cradle Wall Mounting Before wall-mounting the cradle, the scanner support tab must be changed from the desk-mount position to the wall-mount position. Desk Mount Wall Mount 1. Lift the scanner support tab out of the top part of the cradle and replace it in the wall-mount position as show...

Quick Reference Guide 7 Inserting Phaser in the Cradle Place the Phaser scanner in the cradle so that the top of the scanner sits in the larger part of the cradle and the metal contacts on the bottom of the scanner touch the contacts on the cradle. Sending Data to the Host Computer To set up the Pha...

8 PL360/460 Cradle Troubleshooting If the cradle does not work after following the operating instructions in this guide: • check the system power. • check for loose cable connections. • ensure the scanner is sitting properly in the cradle. Cleaning Wipe the cradle periodically with a lens tissue or ...

Quick Reference Guide 9 - Reduce or eliminate vibration. - Reduce or eliminate direct pressure. - Provide adjustable workstations. - Provide adequate clearance. - Provide a suitable working environment. - Improve work procedures. Vehicle or Forklift Installation Position your device within easy reac...

10 PL360/460 Cradle In accordance with Clause 5, IEC 825 and EN60825, the following information is provided to the user: ENGLISH HEBREW CLASS 1 CLASS 1 LASER PRODUCT CLASS 2 LASER LIGHTDO NOT STARE INTO BEAMCLASS 2 LASER PRODUCT DANISH / DANSK ITALIAN / ITALIANO KLASSE 1 KLASSE 1 LASERPRODUKT CLASSE...

Quick Reference Guide 11 indicate the recycling marks on the batteries used in sales, giveaway or promotion. Contact a qualified Taiwanese recycler for proper battery disposal. Symbol Rechargeable Batteries Symbol rechargeable battery packs are designed and constructed to the highest standards withi...

12 PL360/460 Cradle Marking and European Economic Area (EEA) Statement of Compliance Symbol Technologies, Inc., hereby, declares that this device is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. A Declaration of Conformity may be obtained from ht...

14 PL360/460 Cradle Wall Mounting Template CenterLine of Cradle Wall Mounting Socket 2 Wall Mounting Socket 1 1 5/16” 11/16” Use 1/8” drill bit for the screw holes. 3 1/2”

Before you use the unit, it must be configured to operate in your facility’s network and run your applications. If you have a problem running your unit or using your equipment, contact your facility’s Technical or Systems Support. If there is a problem with the equipment, they will contact the Symbo...