Page 2 - LASER SAFETY; CAUTION
LASER SAFETY This unit employs a laser. Only a qualified service person should remove the cover or attempt to service this device, due topossible eye injury. CAUTION: USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSESPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSU...
Page 3 - IMPORTANT SAFEGUARDS
IMPORTANT SAFEGUARDS 1) Read Instructions - All the safety and operating instruc- tions should be read before the product is operated. 2) Retain Instructions - The safety and operating instructions should be retained for future reference. 3) Heed Warnings - All warnings on the product and in the ope...
Page 4 - DVD
The serial number of this product may be found on the back of the DVD player. No others have the same serialnumber as yours. You should record the number and other vital information here and retain this book as a permanentrecord of your purchase to aid identification in case of theft. Serial numbers...
Page 6 - FEATURES
FEATURES ● Dolby Digital sound This player can handle Dolby Digital surround soundhaving 5.1 channels when connected to a Dolby Digi-tal decoder. ● Still/fast/slow/step playback Various playback modes are available including stillpictures, fast forward/reverse, slow motion and stepframes. ● Random p...
Page 7 - ABOUT THE DISCS; PLAYABLE DISCS; Some discs include region codes as shown below.; DISC TYPES; Title 1; Example
ABOUT THE DISCS PLAYABLE DISCS The following discs can be played back on this DVDplayer. This player conforms to the NTSC color system. Youcannot play discs recorded in other color systems suchas PAL or SECAM. ● Some discs include region codes as shown below. ● The number inside the symbol refers to...
Page 8 - OPERATING CONTROLS AND FUNCTIONS; Disc loading tray; REMOTE CONTROL; FRONT PANEL
OPERATING CONTROLS AND FUNCTIONS 1. Disc loading tray 2. PLAY Button [page 13] Starts playback of the disc contents. 3. STOP Button [page 14] Stops operation of the disc. 4. OPEN/CLOSE Button [page 13] Pr e ss to in se rt discs into or remove them from the tray. 5. DISC Number Buttons [page 13] Pres...
Page 9 - DISPLAY; Open the battery compartment; Notes; Do not mix alkaline and manganese batteries.; REAR VIEW; Lit when a CD is inserted
29. Power Cord 30. COAXIAL DIGITAL AUDIO OUT Jack 31. S-VIDEO OUT Jack 32. VIDEO OUT Jack 33. Right AUDIO OUT Jacks 34. Left AUDIO OUT Jacks DISPLAY DISPLAYS DURING OPERATION LOADING THE BATTERIES 1. Open the battery compartment cover. 2. Insert two AA batteries, with each one oriented correctly. 3....
Page 10 - HOOKUPS; CONNECTING TO A TV; FOR TVs WITH S-VIDEO INPUT JACK; CONNECTING TO A STEREO SYSTEM
HOOKUPS CONNECTING TO A TV FOR TVs WITH S-VIDEO INPUT JACK Use an S-Video cable (commercially available) in place of the yellow video cable to enjoy pictures at higher quality. CONNECTING TO A STEREO SYSTEM Notes ● Connect the DVD player directly to a TV. If the A/V cables are connected to a VCR, pi...
Page 13 - PLAYING A DISC; PLAYING A DVD VIDEO; Getting started; USING THE DVD MENUS
PLAYING A DISC PLAYING A DVD VIDEO OR AN AUDIO CD DVD CD Getting started Turn on the power of the TV, amplifier and any othercomponents which are connected to the DVD player.(Change the input system to suit the DVD player, andcheck that the sound volume is correct.) 1 Press the POWER button. ● The p...
Page 14 - For DVDs
USING THE TITLE MENU DVD With a DVD containing a title menu, you can select de-sired titles from the menu. 1 Press the TITLE button. ● The title menu will appear. 2 Select the desired title. ● Press the arrow buttons ( ▼ / ▲ / B / s ) to change the setting, and then press the ENTER button. CALLING U...
Page 16 - Press the MODE button in stop mode.; REPEAT; Press the REPEAT button.; For audio CDs; H G
PLAYING FROM A DESIRED TITLE OR CHAPTER DVD ● Press the numeric buttons to enter the desired chapternumber during playback. The selected chapter willbe located within the current title and then playedback. ● Ti tl e sea rch sta rts whe n any numeric button ispressed during stop mode. You can also pr...
Page 17 - Press the A-B REPEAT button during playback.
A-B REPEAT DVD CD You can define a section to be played back repeatedly. 1 Press the A-B REPEAT button during playback. ● The starting point (A) will then beselected. 2 Press the A-B REPEAT button again at the endpoint (B) of the desired section. ● The selected section will be playedback repeatedly....
Page 18 - SETTINGS; CHANGING THE AUDIO; buttons to select the desired audio; Press the AUDIO button during playback.
SETTINGS CHANGING THE AUDIO LANGUAGE OR SOUND MODE DVD CD The DVD player has a function which allows you toselect the desired audio language and sound mode. For DVDs Press the AUDIO button during playback, and thenpress the ▲ / ▼ buttons to select the desired audio language. ● The audio language can...
Page 19 - buttons to select the desired sub-; buttons several times, the disc does not have; CHANGING THE CAMERA; Press the ANGLE button during playback.; Note
CHANGING THE SUBTITLE LANGUAGE DVD The DVD player has a function which allows you toselect the desired language for subtitles. Press the SUBTITLE button during playback, andthen press the ▲ / ▼ buttons to select the desired sub- title language. ● The subtitle language can be changed if the subtitles...
Page 20 - Press the DISPLAY button.
CHANGING THE ON-SCREEN DISPLAY DVD CD You can check the information about the disc by press-ing the DISPLAY button on the remote control. For DVDs Press the DISPLAY button. ● Pressing the DISPLAY button cycles the display onthe screen. Note ● DOLBY DIGITAL 5.1 Channel is displayed as"DOLBY DIGIT...
Page 21 - CHANGING THE SETUP ITEMS; LANGUAGE SETTINGS; The setup screen appears.
CHANGING THE SETUP ITEMS LANGUAGE SETTINGS 1 Press the SETUP button. ● The setup screen appears. 2 Press the ▲ / ▼ or numeric buttons to select LANGUAGE, and then press the ENTER but-ton. 3 Press the ▲ / ▼ or numeric buttons to select an item, and then press the ENTER button. 4 Press the ▲ / ▼ or nu...
Page 22 - VIDEO SETTINGS; AUDIO SETTINGS; The setup screen will appear.
VIDEO SETTINGS 1 Press the SETUP button. ● The setup screen will appear. 2 Press the ▲ / ▼ or numeric buttons to select VIDEO, and then press theENTER button. 3 Press the ▲ / ▼ or numeric buttons to select an item, and then press the ENTER button. 4 Press the ▲ / ▼ or numeric buttons to select the d...
Page 23 - PARENTAL LOCK; When LEVEL is selected; Press the; When CHANGE PASSWORD is selected
5 Press the SETUP button. ● The setup mode will be canceled and the ordinaryscreen will appear. Note ● If the numeric buttons are used in steps 2 to 4, thesettings are immediately selected. (You do not needto press the ENTER button.) PARENTAL LOCK 1 Press the SETUP button. ● The setup screen will ap...
Page 24 - CONTROL LEVELS; Level 8; Record the password in case you forget it.; OTHER SETTINGS
CONTROL LEVELS ● Level 8 DVD software of any grade (adult/general/children)can be played back. ● Levels 7 to 2 Only DVD software intended for general use andchildren can be played back. ● Level 1 Only DVD software intended for children can beplayed back, with those intended for adult and gen-eral us...
Page 25 - LANGUAGE CODE LIST
LANGUAGE CODE LIST 1 Afar 4 7 4 7 2 Abkhazian 4 7 4 8 3 Afrikaans 4 7 5 2 4 Amharic 4 7 5 9 5 Arabic 4 7 6 4 6 Assamese 4 7 6 5 7 Aymara 4 7 7 1 8 Azerbaijani 4 7 7 2 9 Bashkir 4 8 4 7 10 Byelorussian 4 8 5 1 11 Bulgarian 4 8 5 3 12 Bihari 4 8 5 4 13 Bislama 4 8 5 5 14 Bengali;Bangla 4 8 6 0 15 Tibe...
Page 26 - TROUBLESHOOTING GUIDE; Symptom
TROUBLESHOOTING GUIDE If the DVD player does not perform properly when operated as instructed in this Owner’s Manual, check the player,consulting the following checklist. Symptom Cause Remedy No power ● Loose power plug. ● Insert the power plug firmly into the wall outlet. The player does notrespond...
Page 27 - HANDLING PRECAUTIONS; SERVICING; DISC HANDLING; Do not use a hard cloth since this will mar the disc.
HANDLING PRECAUTIONS SERVICING Should your DVD player become inoperative, do not tryto correct the problem by yourself. There are no user-serviceable parts inside. Turn off, unplug the powercord, and please call our help line at 1-800-968-3429, tolocate an Authorized Service Center. CABINET CLEANING...
Page 28 - SPECIFICATIONS; Designs and specifications are subject to change without notice.
SPECIFICATIONS Product type : DVD Changer Discs : DVD videoAudio CD Output signal format : NTSC color Frequency response DVD (linear sound) : 20 Hz to 22 kHz (sample rate: 48 kHz)20 Hz to 44 kHz (sample rate: 96 kHz) CD : 20 Hz to 20 kHz Signal-to-noise ratio (S/N ratio) CD : 110 dB (EIAJ) Dynamic r...
Page 29 - SEGURIDAD DEL LÁSER
SEGURIDAD DEL LÁSER Esta unidad emplea una unidad láser. Solamente personal calificado de mantenimiento debería quitar la tapa o intentar realizarel mantenimiento del equipo, dado el riesgo de posible lesión ocular. PRECAUCIÓN: EL USO DE CONTROLES O AJUSTES O CUMPLIMIENTO DE PROCEDIMIENTOS DISTINTOS...
Page 30 - IMPORTANTE PARA SU SEGURIDAD
IMPORTANTE PARA SU SEGURIDAD 1) Lea las instrucciones – Lea detenidamente todas las instruc- ciones de seguridad y operación antes de usar el aparato. 2) Conserve las instrucciones – Conserve las instrucciones de seguridad y operación para consultas futuras. 3) Respete las advertencias – Observe est...
Page 31 - ACCESORIOS SUMINISTRADOS; INFORMACIÓN SOBRE LOS DISCOS; DISCOS REPRODUCIBLES; TIPOS DE DISCOS
NOTA ACERCA DEL RECICLAJELos materiales del embalaje de este producto son reciclables ypueden volver a ser utilizados. Disponga de cualquiera ellos segúnlas normas de reciclaje de su localidad. Las pilas nunca deberán tirarse ni incinerarse sino que deberántratarse según las normas locales relaciona...
Page 32 - VISOR; CONEXIONES; CONEXCIÓN A UN TELEVISOR; CONEXIÓN A UN SISTEMA ESTÉREO; DIGITAL, DECK MD O DECK DAT
CONTROLES Y FUNCIONES OPERA- TIVOS [Consulte las ilustraciones de las páginas 8 ~ 9.] 1. Bandeja de carga de discos. 2. Botón de reproducción (PLAY) (página 33) Inicia la reproduc- ción del contenido del disco. 3. Botón de detención (STOP) (página 34). D e t i e ne l a ope rac ión del disco. 4. Botó...
Page 33 - REPRODUCCIÓN DE UN DISCO; USO DE LOS MENÚES DVD; Para DVDs
● El sonido se apaga cuando se ajusta DOLBY DIGITAL en APDO.y 3D VIRTUAL en ENC. para la salida de audio en el modo ajustey luego se selecciona la fuente de audio en un formato envolventeDolby Digital de 5,1 canales. CONEXIÓN A UN DECODIFICADOR O DECODIFICADOR DTS DOLBY DIGITAL Si se utiliza este re...
Page 35 - Para CDs de audio; AJUSTES
RANDOM (ALEATORIO) (CD de audio) (CD) 1) Pulse el botón MODE en el modo detener (stop). ● Aparecerá en pantalla el menú de valores. 2) Pulse nuevamente el botón MODE.3) Pulse el botón PLAY. Comienza entonces la reproducción aleato- ria (random). Notas: ● La reproducción de programas no se encuentra ...
Page 36 - CAMBIO DEL IDIOMA DE SUBTÍTULO; CAMBIO DE LOS ÍTEMS DE CONFI-; FIJACIÓN DE IDIOMAS
● Si utiliza el enchufe DIGITAL AUDIO OUT, no se puede modi-ficar el modo de sonido de los CD de audio. CAMBIO DEL IDIOMA DE SUBTÍTULO (DVD)El reproductor DVD posee una función que le permite seleccionar elidioma deseado para los subtítulos.Pulse el botón SUBTITLE durante la reproducción, y luego pu...
Page 37 - BLOQUEO DE PADRES; Cuando se selecciona NIVEL; OTRAS FIJACIONES; LISTA DE CÓDIGOS DE IDIOMAS
5) Pulse el botón SETUP. ● Se cancela el modo configuración y aparecerá la pantalla común. Nota: ● Si se utilizan los botones numéricos en los pasos 2 a 4, los valores seseleccionan automáticamente (No necesita pulsar el botón ENTER). BLOQUEO DE PADRES 1) Pulse el botón SETUP. ● Aparece la pantalla ...
Page 38 - PRECAUCIONES DE MANEJO; MANTENIMIENTO; MANEJO DEL DISCO
PRECAUCIONES DE MANEJO MANTENIMIENTO En caso de que su reproductor DVD se transforme en no operativo, nointente corregir el problema por usted mismo. No existen en el equipopartes que el usuario pueda reemplazar. Apague el equipo, quite elcable de alimentación eléctrica y sírvase llamar a nuestra lí...
Page 39 - GUÍA PARA SOLUCIÓN DE PROBLEMAS; Sin alimentación eléctrica
GUÍA PARA SOLUCIÓN DE PROBLEMAS Si el reproductor DVD no funcionara adecuadamente tal como se indica en este Manual del Propietario, verifique el reproductor, consultandola siguiente lista de verificación: Síntoma Causa Solución Sin alimentación eléctrica ● Enchufe suelto. ● Inserte el enchufe firme...
Page 40 - LIMITED WARRANTY; days from the date of original retail purchase.; LIMITS AND EXCLUSIONS:; Printed in China
LIMITED WARRANTY Funai Corporation will exchange or repair this product, at its option, in the event of defect in materials or workmanship as follows: EXCHANGE DURATION: 1-90 DAYS: FUNAI CORPORATION will exchange for a new unit without charge for a period of ninety (90) days from the date of origina...