SYLVANIA 6900DTD - Manuals

6 EN 1A23 Before Using Digital broadcasting is the most advanced format of broadcasting, employing a new technology forcompression of audio and video signals which allows broadcasters to transmit digital signals using existingterrestrial systems.Due to this dramatic progress, new features of broadca...

7 EN 1A23 Before Using 1 Bef ore Using • Capable of receiving digital (ATSC*), analog (NTSC*), and cable (NTSC) broadcasts • Capable of receiving High Definition TV broadcasts • Capable of receiving Dolby® digital 5.1 audio • Alternate languages for OSD are available.(English, Spanish, French) • Com...

8 EN 1A23 Before Using 1 POWER button: Turns STB on and off. 2 POWER indicator: Lights up while STB is on. NOTE: When turning the STB on, the power indicator will blink first and light up.When turning the STB off, the power indicator will blink first and go off. 3 Remote control sensor: Receives sig...

9 EN 1A23 Before Using 1 Bef ore Using 1 ANT. IN Jack: Use to connect an antenna to STB. 2 DIGITAL AUDIO (COAXIAL) Jack: Use to connect a decoder or an amplifier to STB with a digital coaxial cable. NOTE: You must use this jack and a Dolby® Digital receiver for Dolby® Digital 5.1 playback. 3 AUDIO R...

1 POWER button: Turns STB on and off. 2 Number buttons: Use to input channel numbers and passwords, andto set time. 3 ENTER button: In SETUP menu, press to determine yourselection. 4 CH o / p buttons: Press to change the channels up or down. 5 Navigation buttons o / p / s / B : Press to move the hig...

You will find STB and the following accessorieswhen unpacking the carton box of STB: 1 Unsnap the battery cover from the back of the remote control. 2 Install two AA batteries making sure the polarity (+ / -) direction is correct. NOTE: When replacing batteries, make sure to replace themin pairs. 3 ...

12 EN 1A23 Before Using SETUP WIZARD guides you through initial setup. "Create new setup" "Keep old setup" "SETUP" "QUIT" QUIT SETUP : : SETUP WIZARD Language for screen (1/8) ( Refer to page 25 through page 29. ) Setting the clock (Manual)(5/8) ( Refer to page 27. ) ...

13 EN 1A23 Before Using 1 Bef ore Using Adding channels / Deleting channels ( Refer to page 43, 46, 49, 51.) ( Refer to page 54, 56.) Adjusting antenna Receiving channels (Autoscan) Selecting screen formats (Screen ratio) Selecting screen formats (Display mode) CHANNEL QUIT CHANNEL DISPLAY CLOCK DET...

14 EN 1A23 Before Using Setting the clock (Daylight Savings Time) Setting the clock (Time Zone) Setting the clock (Manual) Adjusting the clock automatically CLOCK QUIT CHANNEL DISPLAY CLOCK DETAIL DST ON TIME ZONE CENTRAL MANUAL AUTO OFF 2002/ 1/31( THU ) 2 50PM CLOCK QUIT CHANNEL DISPLAY CLOCK DETA...

15 EN 1A23 Before Using 1 Bef ore Using Setting for V-CHIP/CC Setting MPAA rating Setting TV rating Setting CC options Setting a new password DETAIL QUIT CHANNEL DISPLAY CLOCK DETAIL V-CHIP / CC MENU LANGUAGE ENGLISH V-CHIP / CC QUIT CHANNEL DISPLAY CLOCK DETAIL Enter p a s swo r d . Confir m p a s ...

16 EN 1A23 Connections Use a standard antenna cable to connect the wall jack to the ANT IN Jack on STB. STB connection to the antenna Rear panel of STB To the antenna To the antenna WHEN CONNECTING TO CABLE BOX ALSO: NOTE: Antenna and antenna cable are not included. ANT. IN Incoming cable signals NO...

18 EN 1A23 Connections There will be various ways of connecting STB to other devices. Make your connection according to yourchoice of devices, screen format, and sound format.You will find some sample connections in the following pages. • All jacks on STB will not need to be connected. • When you ch...

19 EN 1A23 Connections 1 Use a standard antenna cable to connect the wall jack to the ANT IN jack on STB. 2 Use a standard audio cable to connect the audio output jacks (L, R) of STB to the audio input jacks (L, R) onthe TV. NOTE: If your TV is monaural (MONO) and has only one audio jack, use a stan...

20 EN 1A23 Connections 1 Use a standard antenna cable to connect the wall jack to the ANT IN jack on STB. 2 Use a standard audio cable to connect the audio output jacks (L, R) of STB to the audio input jacks (L, R) onthe TV. 3 Use an S-video cable to connect the S-VIDEO output jack on STB to an S-vi...

21 EN 1A23 Connections 1 Use a standard antenna cable to connect the wall jack to the ANT. IN jack on STB. 2 Use a standard audio cable to connect the audio output jacks (L, R) of STB to the audio input jacks (L, R) onthe TV. NOTE: If your TV is monaural (MONO) and has only one audio jack, connect a...

22 EN 1A23 Connections 1 Use a standard antenna cable to connect the wall jack to the ANT. IN jack on STB. 2 Use a standard audio cable to connect the audio output jacks (L, R) on STB to the audio input jacks (L, R)on the stereo. 3 Connect STB and the TV with a video cable. NOTE: Refer to the pages ...

23 EN 1A23 Connections 1 Use a standard antenna cable to connect the wall jack to the ANT. IN jack on STB. 2 Connect a coaxial digital audio cable (purchase locally) from DIGITAL AUDIO (COAXIAL) output jackon STB to a coaxial digital audio input jack on the digital decoder. 3 Connect STB and the TV ...

1 Use a standard antenna cable to connect the wall jack to the ANT IN jack on STB. 2 Use a standard audio cable to connect the set of audio output jacks (L, R) on STB to the set of audio input jacks (L, R) on the VCR. NOTE: If your VCR is monaural (MONO) and has only one audio jack, use a standard a...

SETUP WIZARD SETUP WIZARD is the very convenient menu foryou to make the initial settings of STB. When STB is turned on for the first time afterconnecting the AC power cord, SETUP WIZARD isdisplayed on the screen automatically. You cancomplete the following items for the initial Setupsthrough this m...

3 Select a desired language using o o / p p navigation buttons, then press ENTER. • The selected language will be activated. • SETUP WIZARD 2/8 will appear. 4 STB starts scanning channels. • Wait until the scanning is complete. • When the scanning is complete, “100%” will beindicated in the box, the...

7 Select the desired time zone using o o / p p / s s / B B navigation buttons, then press ENTER. • SETUP WIZARD 5/8 will appear. NOTE : Refer to “INFORMATION on Time Zones ” on page61. 8 Enter YEAR, DATE and TIME using o o / p p / s s / B B navigation buttons or number buttons. • Every time you ente...

9 Press ENTER when the cursor is on SET. • Your settings will be activated. • SETUP WIZARD 6/8 will appear, then STB willstart searching channels with Automatic ClockAdjustments to keep the time correct. 10 Select the desired channel to search from the channel map using o o / p p navigation buttons....

30 EN 1A23 Basic Operation EN 1A23 EN 1A23 EN 1A23 EN 1A23 STB is capable of receiving analog (NTSC format)and digital (ATSC format) broadcasts.All available channels from any of these broadcastsources can be tuned in using the CH o / p buttons and number buttons on your remote control.Each channel ...

When returning to the channel you were lastwatching: • STB will tune back in the channel you were lastwatching. About sub-channel broadcasting: There may be different programs being broadcast onsub-channels through a single channel from ATSC.You can watch each sub-channel program beingbroadcast by s...

33 EN 1A23 Basic Operation 4 Basic Operation EN 1A23 EN 1A23 EN 1A23 The channel banner provides you with informationon the channel you have selected. 1 Press INFO to display a channel banner. • Channel information will appear in the channelbanner. Remote: Screen: 2 Press INFO to clear. NOTE: When t...

34 EN 1A23 Basic Operation EN 1A23 EN 1A23 EN 1A23 Information icons DTV: NTSC: HD (High Definition): SD (Standard Definition): SD (Standard Definition): LOCK: ! " CC (Closed Caption): # V-CHIP/CC: ! "$ % & '( ! "$ ' ) Program title Program rating Program description Channel number :...

1 Press AUDIO button. Remote: When tuning in NTSC: The sequence will repeat as shown below whenavailable. Screen: When tuning in ATSC: The sequence will repeat according to audio-mapwhen the AUDIO button is pressed. NOTE: OTHER will be indicated when alternate languagesare not English, Spanish, or F...

You can stop the picture on the screen anytime bypressing STILL o button. 1 Press STILL o o button while watching TV. • STILL will be indicated on the lower left whilethe picture is displayed. Remote: Screen: NOTE: During STILL, the programs audio will continue. 2 Press any button to quit. • The pic...

Some messages are displayed on the screen duringchannel changing or during programs. When STB cannot receive a channel signal, thewhole screen becomes gray, then NO SIGNALappears in the center.This may occur when: • the signal is too weak • the channel is not broadcasting • the antenna cable is not ...

Electronic Program Guide (EPG) is an application fordigital channels that lists current and scheduledprograms that are or will be available on eachchannel and a short summary or commentary foreach program. EPG is the electronic equivalent of a printedtelevision program guide.You can view a list of p...

2 Select the desired program using o o / p p / s s / B B navigation buttons. • The cursor will move as you press any navigationbutton. When viewing EPG for the next two hours upto the next seven days: Press B navigation button. • EPG for the next two hours will appear. NOTE: By pressing B navigation...

41 EN 1A23 Advanced Operation 5 Ad v anced Operation EN 1A23 EN 1A23 EN 1A23 EN 1A23 Information icons LOCK: Indicates that the current program is blocked according to your V-CHIP setting. CC (Closed Caption): Indicates that the program being broadcast is available with closed captioning. Day of bro...

42 EN 1A23 Advanced Operation EN 1A23 EN 1A23 EN 1A23 EN 1A23 includes: • ADD / DELETE: You can add or delete channels in the channel map. • ANTENNA: You can verify and adjust the signal strength of each channel to get a clearer picture. • AUTOSCAN: You can get available channels automatically into ...

You can add channels in the channel map. ADD: You can add desired channels to the channel map.Once you add channels to a channel map, you will beallowed to select the channels in order using CH o / p buttons. NOTE: When you add digital and analog channels with thesame main channel number, you will n...

2 Select CHANNEL using o o / p p navigation buttons, then press ENTER. • CHANNEL menu will appear. 3 Select ADD/ DELETE using o o / p p navigation buttons, then press ENTER. • ADD/ DELETE menu will appear. 4 To add, first enter the digital channel number 26-1. TIP: You can enter simply 26 (main chan...

5 Select ADD using o o / p p navigation buttons, then press ENTER. • 26-1 will be added to the channel map. NOTE: Digital channels can be added only with mainchannel numbers. When the digital channel added toa channel-map has sub-channels, however, the sub-channels can be selected using CH o / p but...

You can add and delete channels in the channel map. DELETE : You can delete channels from the channel-map. NOTE: When you delete digital and analog channels with thesame main channel number, you will need to deleteeach channel. NOTE: Once you delete channels from a channel-map, youcannot select thos...

3 Select ADD/DELETE using o o / p p navigation buttons, then press ENTER. • ADD/ DELETE menu will appear. 4 Select DELETE using o o / p p navigation buttons, then press ENTER. • The cursor will move to the channel map. ADD/DELETE QUIT CHANNEL DISPLAY CLOCK DETAIL 13-0 ADD DELETE 26 25 22 13 ADD/DELE...

5 Select the digital channel number 26 using o o / p p navigation buttons. • 26-1 will be indicated in the box at the top of thescreen. TIP: When adding a channel number previously deleted,add the channel number by the steps in the ADDmenu or renew the whole channel map with theAUTOSCAN menu. 6 Pres...

2 Press SETUP to display SETUP menu. • SETUP menu will appear. 3 Select CHANNEL using o o / p p navigation buttons, then press ENTER. • CHANNEL menu will appear. 4 Select ANTENNA using o o / p p navigation buttons, then press ENTER. • ANTENNA menu will appear, then STB startsreceiving the signal str...

51 EN 1A23 Advanced Operation 5 Ad v anced Operation EN 1A23 STB has the convenient function to get availablechannels automatically. AUTOSCAN is capable of receiving availablechannels, both analog and digital, and storing thosechannels in a channel map. Channels once stored in a channel map can bese...

3 Select AUTOSCAN using o o / p p navigation buttons, then press ENTER. • AUTOSCAN menu will appear. 4 Select NEXT using s s / B B navigation buttons, then press ENTER. • Scanning window will appear, then STB will startscanning for all available channels. NOTE: It will depend on the location, howeve...

To cancel AUTOSCAN during scanning: Press SETUP or ENTER to cancel. • AUTOSCAN CANCELLED will appear on thescreen. CAUTION: If AUTOSCAN is cancelled during scanning, somechannels not yet scanned may not be received.It is recommended to complete AUTOSCAN. 5 AUTOSCAN is complete. • SETUP menu will go ...

STB allows you to select a screen ratio and a displaymode (aspect ratio) to match the formats of theprogram being broadcast and your TV screen.You can also change to aspect ratios you prefer towatch. There are two screen ratios used in manufacturingTVs. These are standard TV format (4:3), andwidescr...

3 Select SCREEN RATIO using o o / p p navigation buttons, then press ENTER. • Screen ratio options will appear. 4 Select the desired screen ratio using o o / p p navigation buttons, then press ENTER. • The screen ratio will be set. 5 Press ENTER to exit SETUP menu. NOTE: The screen ratio should be s...

1 Press SETUP to display SETUP menu. • SETUP menu will appear. Remote: Screen: 2 Select DISPLAY using o o / p p navigation buttons, then press ENTER. • DISPLAY menu will appear. DISPLAY QUIT CHANNEL DISPLAY CLOCK DETAIL SCREEN RATIO 4:3 DISPLAY MODE LETTERBOX SETUP QUIT CHANNEL DISPLAY CLOCK DETAIL ...

3 Select DISPLAY MODE, using o o / p p navigation buttons , then press ENTER. • Display mode options will appear. 4 Select the desired display mode using o o / p p navigation buttons, then press ENTER. • The display mode will be set. NOTE: You can choose the display mode as you prefer.Refer to “INFO...

INFORMATION on Screen Ratio and Display Mode Letter Box Displays the entire picture image while fitting the picture to the screen by applying gray bars to the top and bottom of the screen. No information will be lost. Zoom Expands the picture image to fill the screen while cropping some images on th...

59 EN 1A23 Advanced Operation 5 Ad v anced Operation EN 1A23 EN 1A23 EN 1A23 EN 1A23 EN 1A23 To get the EPG (Electronic Program Guide) andChannel banner, you need to set the CLOCKcorrectly. NOTE: The clock function is featured for displaying EPG sothere may be 5 minute-time lag a day at themaximum. ...

3 Select Daylight Savings Time (DST) using o o / p p navigation buttons, then press ENTER. • Daylight savings time setting menu will appear. 4 Select ON or OFF using s s / B B navigation buttons, then press ENTER. • Daylight savings time will be set, then CLOCKmenu will appear. 5 Select TIME ZONE us...

6 Select the desired time zone using o o / p p / s s / B B navigation buttons, then press ENTER. • The TIME ZONE will be set, then CLOCK menuwill appear. CLOCK QUIT CHANNEL DISPLAY CLOCK DETAIL DST ON TIME ZONE CENTRAL MANUAL AUTO OFF 2002/ 1/31( THU ) 2 50PM ALASKA HAWAII PACIFIC MOUNTAIN CENTRAL E...

7 Select MANUAL using o o / p p navigation buttons, then press ENTER. • The current time setting menu will appear. 8 Enter YEAR, DATE, and TIME using o o / p p / s s / B B navigation buttons or number buttons. • Press ENTER to set each value, then the cursorwill move to the next. • When going back a...

63 EN 1A23 Advanced Operation 5 Ad v anced Operation EN 1A23 EN 1A23 EN 1A23 EN 1A23 EN 1A23 9 Press ENTER when the cursor is on SET. • Your settings will be activated. 10 Press SETUP to exit SETUP menu. CLOCK QUIT CHANNEL DISPLAY CLOCK DETAIL DST ON TIME ZONE CENTRAL MANUAL AUTO OFF 2002/ 3/31( SUN...

STB is capable of adjusting the clock automaticallyusing the channel clock data included in the signalfrom digital broadcast sources. In this menu, STB will search for channels withclock data, then select a channel to adjust the clock.STB will then adjust the clock using the channelselected. 1 Press...

3 Select AUTO using o o / p p navigation buttons, then press ENTER. • Auto clock setting menu will appear, then STBwill start searching for channels with clock data. When not using the auto-clock setting: Select OFF from the channel-map, then press ENTER . TIP: OFF is located at the top of the chann...

You will need to change the 4-digit password toprotect your V-CHIP/CC setting. “0000” has been stored as the default password. NOTE: Once the power supply is stopped due to the powerfailure or the unplugging AC power cord for approx.5 seconds, the password will go back to the defaultpassword “0000.”...

5 Select NEW PASSWORD using o o / p p navigation buttons, then press ENTER. • Password setting menu will appear. 6 Enter a new 4-digit password in the upper space, then enter again in thelower space to confirm. 7 V-CHIP/CC menu will appear. • Your new password is stored. 8 Press SETUP to exit SETUP ...

69 EN 1A23 Advanced Operation 5 Ad v anced Operation EN 1A23 EN 1A23 EN 1A23 EN 1A23 EN 1A23 In V-CHIP/CC menu, you will make some importantsettings for the viewing programs you select.First of all, you will need to set your 4-digitpassword for your V-CHIP setting.Then you can proceed with making yo...

1 Press SETUP to display SETUP menu. • SETUP menu will appear. Remote: Screen: 2 Select DETAIL using o o / p p navigation buttons, then press ENTER. • DETAIL menu will appear. 3 Select V-CHIP/CC using o o / p p navigation buttons, then press ENTER. • V-CHIP/CC password window will appear. V-CHIP / C...

4 Enter your 4-digit password. • “ * ” will appear for each digit. After the correct password is entered, V-CHIP/CCmenu will appear. 5 Select V-CHIP/CC using o o / p p navigation buttons, then press ENTER. • V-CHIP/CC setting menu will appear. NOTE: To set V-CHIP/CC settings, choose STB. When choosi...

The MPAA (Motion Picture Association of America)uses the standard movie ratings. 1,7 2,3,4,5,6 4 2,3,5,6 Age Label NR Not Rated by MPAA Description G General Audience PG Parental Guidance Suggested. Some material may not be suitable for children. NC-17 No one 17 and under admitted.Some material is i...

4 Enter your 4-digit password. • “ * ” will appear for each digit. After entering the correct password, V-CHIP/CCmenu will appear. 5 Select MPAA RATING using o o / p p navigation buttons, then press ENTER. • MPAA rating setting menu will appear. V-CHIP / CC QUIT CHANNEL DISPLAY CLOCK DETAIL Set MPAA...

76 EN 1A23 Advanced Operation EN 1A23 EN 1A23 EN 1A23 EN 1A23 EN 1A23 6 Select PG-13 using o o / p p navigation buttons, then press ENTER. E.g., when you want to block all PG-13movies: • Lock indicators will be added to programs ratedPG-13 and above. NOTE: All movie programs rated PG-13 and above wi...

(TV Parental Guidelines)TV rating allows parents to block out programs theydon’t want their children to see.TV rating consists of the age labels and the contentlabels. The following are the descriptions for each label: NOTE: When you block a particular rating or content label,all categories above th...

4 Enter your 4-digit password. • “ * ” will appear for each digit. After the correct password is entered, V-CHIP/CCmenu will appear. 5 Select TV RATING using o o / p p navigation buttons, then press ENTER. • TV rating setting menu will appear. V-CHIP / CC QUIT CHANNEL DISPLAY CLOCK DETAIL Set TV rat...

Closed Caption (CC) provides you with on-screentext versions of the audio content for the programbeing broadcast. In this menu, you are allowed to turn Closed Captionsignal On or Off, to set a language for the closedcaption and to choose a format for the closed caption. NOTE: OFF has been selected a...

5 Select CC SELECTION using o o / p p navigation buttons, then press ENTER. • CC options menu will appear. 6 Select the desired CC option using o o / p p navigation buttons, then press ENTER. • The selected CC option will be set. 7 Press SETUP to exit SETUP menu. Use when Closed Caption is not desir...

English, French, and Spanish are available for thescreen menu. You can choose the language youprefer. NOTE: ENGLISH has been selected as the default beforepurchase. 1 Press SETUP to display SETUP menu. • SETUP menu will appear. Remote: Screen: 2 Select DETAIL using o o / p p navigation buttons, then...

3 Select MENU LANGUAGE using o o / p p navigation buttons, then press ENTER. • Language menu will appear. 4 Select the desired language using o o / p p navigation buttons (E.g., select French),then press ENTER. • The selected language will be set, and theselected language will be indicated on screen...

86 EN 1A23 Appendix EN 1A23 EN 1A23 EN 1A23 EN 1A23 EN 1A23 EN 1A23 Symptom Remedy • Make sure that the AC power cord is securely plugged into the power outlet.• Make sure that STB is turned on. • Make sure to point the remote control unit at the remote control sensor.• You may be too far from STB. ...

87 EN 1A23 Appendix 6 Appendix and W arranty EN 1A23 EN 1A23 EN 1A23 EN 1A23 EN 1A23 EN 1A23 • Make sure that the audio cable is correctly connected.• Make sure that audio devices (stereo, TV, decoder) are turned on.• Make sure that audio devices (stereo, decoder) are correctly set to STB audio outp...

Product STB for ATSC/NTSC Connecting Jacks ANT IN F connector (75 ohm) Video Output (component) 3-pin jack (Y, Pb, Pr) S-Video Output Mini DIN 4-pin jack (75 ohm) Video Output 1-pin jack, 1Vpp Analog Audio Output 2-pin jack (L, R)450 mVrms (100k ohm) Digital Audio Output 1-pin jack (Dolby Digital) P...

89 EN 1A23 Appendix 6 Appendix and W arranty EN 1A23 EN 1A23 EN 1A23 EN 1A23 EN 1A23 EN 1A23 Digital audio (coaxial) output jack: Digital audio (coaxial) output jack send digital audiodata to audio devices equipped with a digital audio(coaxial) input jack. Dolby® Digital: Dolby® Digital (when availa...

90 ES 1A23 Guía para rápida consulta ES 1A23 ES 1A23 ES 1A23 ES 1A23 ES 1A23 ES 1A23 1 Botón POWER: Para encender y apagar el STB. 2 Indicador POWER: Se ilumina cuando el STB está encendido. NOTA: Cuando se enciende el STB, el indicador POWERprimero parpadea y luego se ilumina de maneraconstante. Cu...

91 ES 1A23 Guía para rápida consulta 7 Guía para rápida consulta ES 1A23 ES 1A23 ES 1A23 ES 1A23 ES 1A23 ES 1A23 ES 1A23 4 Botones CH o / p : Presione este botón para cambiar de canal endirección de ascenso o descenso. 5 Botones de navegación o / p / s / B : Presione estos botones para mover el curs...

92 ES 1A23 Guía para rápida consulta ES 1A23 ES 1A23 ES 1A23 ES 1A23 ES 1A23 ES 1A23 Conexiones de antena Use un cable de antena estándar para conectar la toma mural a la toma ANT IN del STB. Conexión del STB a la antena Panel trasero del STB A la antena A la antena AL CONECTAR EL EQUIPO A UNA CAJA ...

93 ES 1A23 Guía para rápida consulta 7 Guía para rápida consulta ES 1A23 ES 1A23 ES 1A23 ES 1A23 ES 1A23 ES 1A23 Conexión del STB a un SDTV utilizando la salida VIDEO Panel trasero del STB Cable de audio Cable de vídeo A las tomas de entrada de audio (L, R) A la toma de entrada de vídeo NOTA: El cab...

94 ES 1A23 Guía para rápida consulta ES 1A23 ES 1A23 ES 1A23 ES 1A23 ES 1A23 ES 1A23 ASISTENTE PARA LA CONFIGURACIÓN(SETUP WIZARD) El SETUP WIZARD es un práctico menú que leayuda hacer los ajustes iniciales del STB. Cuando se enciende el STB por primera vez despuésde conectar el cable de alimentació...

95 ES 1A23 Guía para rápida consulta 7 Guía para rápida consulta ES 1A23 ES 1A23 ES 1A23 ES 1A23 ES 1A23 ES 1A23 8 Introduzca el año (YEAR), fecha (DATE) y hora (TIME) utilizando los botones denavegación o o / p p / s s / B B o los botones numéricos. • Cada vez que introduzca un número, presioneENTE...

Printed in China ST201UB 0EMN02308 ***** LIMITED WARRANTY FUNAI CORP. will repair this SYLVANIA product, free of charge in the USA in the event of defect in materials or workmanship as follows: DURATION: PARTS: FUNAI CORP. will provide parts to replace defective parts without charge for one (1) year...