SYLVANIA 6637LCT A - Manuals

Page 2 - TO REDUCE THE RISK OF ELEC-; CAUTION; The important note is located on the rear of the cabinet.; IMPORTANT SAFEGUARDS

2 EN CAUTION: TO REDUCE THE RISK OF ELEC- TRIC SHOCK, DO NOT REMOVE COVER (OR BACK).NO USER SERVICEABLE PARTS INSIDE. REFERSERVICING TO QUALIFIED SERVICE PERSONNEL. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN THIS SYMBOL INDICATES THAT DANGER-OUS VOLTAGE CONSTITUTING A RISK OFELECTRIC SHOCK IS PRESEN...

Page 3 - PRECAUTIONS; Note to CATV system installer:

3 EN IMPOR T ANT SAFEGU ARDS / PRECA UTIONS PRECAUTIONS • Place your TV in a room with adequate ventilation.• Keep your TV set away from sources of direct heat, such as heat registers or direct sunlight.• Do not place your TV on soft surfaces, such as rugs or blankets.• Leave enough room for air to ...

Page 4 - • Owner’s Manual

4 EN FEATURES SUPPLIED ACCESSORIES • Owner’s Manual (1EMN21968A) • Remote control unit (NF000UD) • Batteries (“AA” x 2) • If you need to replace these accessories, please refer to the PART NO. with the illustrations and call our toll free customer support line found on the cover of this manual. • De...

Page 5 - ONTENTS; SYMBOLS USED IN THIS MANUAL

5 EN SUPPLIED A CCESSORIES / FEA TURES / CONTENTS C ONTENTS IMPORTANT SAFEGUARDS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ...

Page 7 - INSTALLING THE BATTERIES; Reversed batteries may cause damage to the device.; FUNCTIONS; from underneath; AUDIO OUT jacks

7 EN INSTALLING THE BATTERIES Install two AA batteries (included) matching the polarity (++ / – –) indicated inside battery compartment ofthe remote control. [BATTERY PRECAUTIONS] • Be sure to follow the correct polarity as indicated in the battery compartment. Reversed batteries may cause damage to...

Page 8 - ) When connecting your TV to an antenna; Coaxial cable; antenna; MAKE SURE YOU HAVE AN ANTENNA.

P REPARATION FOR USE 8 EN CONNECTION This section describes how to connect your TV to an antenna, cable box, etc. [ANTENNA CABLE CONNECTION] 1) When connecting your TV to an antenna Connect the Coaxial cable on your home outlet to the ANT. IN jack of this TV. 2) When connecting TV to cable TV compan...

Page 9 - CONNECTING OTHER DEVICES; HDMI-DVI conversion cable; HDMI cable

9 EN PREP ARA TION FOR USE CONNECTING OTHER DEVICES [HDMI] 1) High Definition Multimedia Interface (HDMI) uses the latest technology to ensure the signal maintains the highest degree of integrity from source to TV. Both video and audio travel through a single cable. 2) When your video device has a D...

Page 10 - Rear of this TV

10 EN [COMPONENT CABLE CONNECTION] Offers better picture quality for video devices connected to your TV.Use a component video cable (not included) to connect your TV to external video devices equipped withcomponent video jacks.If you connect to your TV’s COMPONENT1 input jack, connect audio cables t...

Page 11 - Audio cable

11 EN PREP ARA TION FOR USE [VIDEO CONNECTION] Offers standard picture quality for video devices connected to your TV.When the audio jack of the video device is monaural, connect the audio cable to the audio L input jack. [DIGITAL AUDIO CONNECTION] If you connect this TV to an external digital audio...

Page 12 - INITIAL SETUP; NITIAL SETTINGS

12 EN INITIAL SETUP This section will guide you through your TV’s initialset up which includes selecting a language for youron-screen menu and AUTOSCAN, which automati-cally scans and memorizes viewable channels. 1 After making all the necessary connections, turnon your TV. 2 Press [POWER] . Initial...

Page 13 - AUTOSCAN; HANNEL SETTINGS

13 EN INITIAL SETTINGS / CHANNEL SETTINGS 3 For TV channels, using [ K / L ] , select “Air”. For CATV channels, select “Cable”. • Press [ENTER] . Scanning and memorizing the channels auto-matically starts. • When the scanning and memorizing are com- pleted, the lowest memorized channel in thebroadca...

Page 14 - CHANNEL LIST

14 EN CHANNEL LIST This function lets you remove undesired channelsfrom the Channel Registration List. 1 Display the setup screen. • Press [SETUP] . The following setup screen appears. 2 Select “CHANNEL” and press [ENTER] to con- firm. • Using [ K / L ] , select “Channel List”. • Press [ENTER] . Cha...

Page 15 - CHANNEL SETTINGS; MANUAL REGISTER

15 EN CHANNEL SETTINGS MANUAL REGISTER This function lets you manually add channels notmemorized due to poor broadcast strength duringAUTOSCAN. 1 Display the setup screen. • Press [SETUP] . The following setup screen appears. 2 Select “CHANNEL” and press [ENTER] to con- firm. • Using [ K / L ] , sel...

Page 16 - ANTENNA CONFIRMATION; • If the channel is set to external input, you can-

16 EN ANTENNA CONFIRMATION Displays signal strength for each channel. 1 Display the setup screen. • Press [SETUP] . The following setup screen appears. 2 Select “CHANNEL” and press [ENTER] to con- firm. • Using [ K / L ] , select “Antenna”. • Press [ENTER] . • Using [the Number buttons] or [CH K / L...

Page 17 - LANGUAGE SELECTION

17 EN CHANNEL SETTINGS LANGUAGE SELECTION You can choose English, Spanish, or French asyour on screen language. 1 Display the setup screen. • Press [SETUP] . The following setup screen appears. 2 Select “LANGUAGE” and press [ENTER] to con- firm. • Using [ K / L ] , select “English”, “Español” or “Fr...

Page 18 - CHANNEL SELECTION; NEL; VOLUME ADJUSTMENT; on your remote control; ATSC; ATCHING TV

18 EN CHANNEL SELECTION Select channels by pressing [CH K / L ] found on remote control or on the TV’s control panel, or bypressing [the Number buttons] found on the remote control. [CH K / L ] • Use [CH K / L ] to change the channel. • Same operation is also available with [CHAN- NEL K / L ] on the...

Page 19 - STILL MODE; MONO

19 WA TCHING TV EN STILL MODE You can freeze the image shown on the screen. 1 Pause the image. • When you press [STILL] , the image shown on the screen is paused. • The audio is not paused and keeps on reading out. • If the digital signal is gone or protected, the image will remain paused and the au...

Page 20 - ACCESSING EXTERNAL DEVICES; • When you press

20 EN ACCESSING EXTERNAL DEVICES Use your remote control to access DVD recorders,home audio systems and other external deviceswhen they are connected to your television. Use your remote control to select external com-ponent. • When you press [INPUT SELECT] or [CH L ] on the remote control, the input...

Page 21 - CHANGING THE SCREEN DISPLAY MODE; Press; Wide displays the center of the picture as original

21 EN WA TCHING TV CHANGING THE SCREEN DISPLAY MODE Each of 4 display modes can be selected in either4:3 or 16:9 aspect ratios. 1 Press [SCREEN MODE] , to switch the TV aspect ratio. 2 Press [SCREEN MODE] repeatedly until the nor- mal screen displays. NOTE: • Some programs may not offer all display ...

Page 22 - SCREEN INFORMATION

22 EN SCREEN INFORMATION You can display the currently selected channel orother information such as the audio mode on thescreen. In the analog mode, the current channel and theaudio mode are displayed. 1 Display the channel number and the audiomode. • Press [INFO] on the remote control. The current ...

Page 23 - PTIONAL SETTINGS; SLEEP TIMER

23 EN WA TCHING TV / OPTIONAL SETTINGS O PTIONAL SETTINGS SETUP SCREEN This section describes the overview of the setupscreen displayed when you press [SETUP] . For more details, see the reference page for eachitem. The setup screen consists of the function settingitems below. • To exit settings. • ...

Page 24 - PICTURE ADJUSTMENT

24 EN PICTURE ADJUSTMENT You can select from four default picture color set-tings. You can also adjust brightness, contrast,color, tint, sharpness and color temperature as wellas energy saving settings. 1 Display the setup screen. • Press [SETUP] . The following setup screen appears. 2 Select “PICTU...

Page 25 - OPTIONAL SETTINGS; CLOSED CAPTION

25 EN OPTIONAL SETTINGS CLOSED CAPTION You can view closed captioning (cc) for TV pro-grams, movies, news, and prerecorded tapes.Closed captions refer to text of dialogue or descrip-tions displayed on-screen for the hearing impaired. 1 Display the setup screen. • Press [SETUP] . The following setup ...

Page 26 - DTV CLOSED CAPTION; Service 1 to Service 6:; CLOSED CAPTION STYLE

26 EN DTV CLOSED CAPTION Apart from closed captions, DTV has its own closedcaptions called DTV CC. Use this menu to changethe settings for DTV CC. 1 Display the setup screen. • Press [SETUP] . The following setup screen appears. 2 Select “DETAIL” and press [ENTER] to confirm. • Using [ K / L ] , sel...

Page 27 - • When “User Setting” is set to “On”, you can set; A B C D E F G H I J K L; Picture display; To exit the setup, press

27 EN OPTIONAL SETTINGS 6 Set each item. • When “User Setting” is set to “On”, you can set the following items. • CC style set by “User Setting” will be displayed.• Using [ K / L ] , select the item you want to set. • You can switch the setting for each item with [ K / L ] . • The setting descriptio...

Page 28 - A MPAA Rating

28 EN V-CHIP You can block certain programming inappropriate forchildren. This block can be released by entering apassword. 1 Display the setup screen. • Press [SETUP] . The following setup screen appears. 2 Select “DETAIL” and press [ENTER] . • Using [ K / L ] , select “V-chip”. • Press [ENTER] . T...

Page 29 - B TV Rating

29 EN OPTIONAL SETTINGS 5 Set “MPAA Rating”.• Using [ K / L ] , select the rating. • Press [ENTER] and set to “View” or “Block”. 6 To exit the setup, press [SETUP] . 4 Display the “TV Rating” screen. • Using [ K / L ] , select “TV Rating”. • Press [ENTER] . V-Chip V-Chip Select View/Block Back BACK ...

Page 30 - C New Password

30 EN 4 Display the “New Password” screen. • Using [ K / L ] , select “New Password”. • Press [ENTER] . 5 Change the password. • Use [the Number buttons] on the remote con- trol and enter the NEW 4-digit password. • Enter password again in “Confirm password” space. 6 To exit the setup, press [SETUP]...

Page 31 - HDMI AUDIO

31 EN HDMI AUDIO Set the method of sound input for HDMI jack. 1 Display the setup screen. • Press [SETUP] . The following setup screen appears. 2 Select “DETAIL” and press [ENTER] to confirm. • Using [ K / L ] , select “HDMI Audio” and press [ENTER] to confirm. 3 Switch the HDMI Audio. • Using [ K /...

Page 32 - TROUBLESHOOTING GUIDE; Symptom; ISCELLANEOUS

32 EN TROUBLESHOOTING GUIDE Before calling for service, please refer to the following information. Symptom Remedy No power No picture or sound No color Sound OK, picture poor Picture distorted Weak picture Lines or streaks in picture Picture blurred Ghosts in picture Bars on screen • Be sure the pow...

Page 33 - Problems with Closed Caption Feature; MISCELLANEOUS

Problems with Closed Caption Feature • Closed captioning production companies may broadcast pro- grams without correcting the misspelling in a live broadcast. • Captions that are delayed a few seconds behind the actual dialogue are common for live broadcasts. Most captioning production compa-nies ca...

Page 34 - CABINET CLEANING; • Wipe the front panel and other exterior surfaces of; LCD CLEANING; MAINTENANCE

34 EN ATSC Acronym that stands for AdvancedTelevision Systems Committee andthe name of the digital broadcastingstandards. Aspect ratio The width of a TV screen relativeto its height. Conventional TVs are4:3 (in other words, the screen isalmost square); widescreen mod-els are 16:9 (the screen is almo...

Page 35 - PECIFICATIONS; GENERAL SPECIFICATIONS; Terminals; Mini DIN 4-pin jack x 2; Coaxial Digital Audio Output:; One pin jack, 500mVpp; Stereo Sound System Speaker; ELECTRICAL SPECIFICATION; MISCELLANEOUS / SPECIFICA

35 EN S PECIFICATIONS GENERAL SPECIFICATIONS Television System: ATSCNTSC-MTV Standard Closed Caption System: §15.119/FCC (Analog CC)§15.122/FCC (Digital CC) Channel Coverage (ATSC/NTSC) VHF: 2 ~ 13 UHF: 14 ~ 69 CATV: 2 ~ 13, A ~ W,W+1 ~ W+94,A-5 ~ A-1, 5A Tuning System: Channel frequency synthesized...

Page 36 - Printed in China; LIMITED WARRANTY; LIMITS AND EXCLUSIONS:; FUNAI CORP. RESERVES THE RIGHT TO MODIFY ANY DESIGN OF THIS PRODUCT; WARRANTY STATEMENT REGARDING NON AUTHORIZED REPAIRS:; please contact us at :; FUNAI CORPORATION

Printed in China 1EMN21968A L5007UH / L5003UD ★★★ LIMITED WARRANTY FUNAI CORP. will repair this product, free of charge in the USA in the event of defect in materials or workmanshipas follows: DURATION: PARTS: FUNAI CORP. will provide parts to replace defective parts without charge for one (1) year ...