SYLVANIA 6309CCC - Manuals

SYLVANIA 6309CCC – Manual in PDF format online.

Manuals:

Manual

Manual SYLVANIA 6309CCC

Summary

Page 2 - CAUTION; IMPORTANT SAFEGUARDS

1.Read instructions- All the safety and operating instructions should be read before the appliance is operated. 2.Retain Instructions- The safety and operating instructions should be retained for future reference. 3.Heed Warnings -All warnings on the appliance and in the operating instructions shoul...

Page 4 - PRECAUTIONS; LOCATION; IMPORTANT COPYRIGHT INFORMATION

AVOID THE HAZARDS OF ELECTRICAL SHOCK AND FIRE - 4 - EN 9J27 PRECAUTIONS LOCATION For safe operation and satisfactory performance ofyour TV/VCR, keep the following in mind whenselecting a place for its installation: • Shield it from direct sunlight and keep it awayfrom sources of intense heat. • Avo...

Page 5 - TABLE OF CONTENTS; A NOTE ABOUT RECYCLING; OPERATING CONTROLS AND FUNCTIONS 8

- 5 - EN 9J27 TABLE OF CONTENTS A NOTE ABOUT RECYCLING This product’s packaging materials are recyclable and can be reused. Please dispose of any materials inaccordance with your local recycling regulations.Batteries should never be thrown away or incinerated but disposed of in accordance with your ...

Page 7 - VIDEO CASSETTE; This TV/VCR will operate with any cassette that has the

- 7 - EN 9J27 VIDEO CASSETTE This TV/VCR will operate with any cassette that has the mark. For best results, we recommend the use of high-quality tapes. Do not use poor quality or damaged tapes. REMOVING A CASSETTE 1)In the Stop mode, press the EJECT button on the remote control or press the STOP/EJ...

Page 8 - OPERATING CONTROLS AND FUNCTIONS

- 8 - EN 9J27 OPERATING CONTROLS AND FUNCTIONS NOTE: • We do not recommend the use of universal remote controls. Not all of the functions may be controlled witha universal remote control.If you decide to use a universal remote control with this unit, please be aware that the code number givenmay not...

Page 10 - PREPARATION FOR USE; CONNECTIONS; DIPOLE ANTENNA HOOK UP; Antenna/Cable Connections Continued on the Next Page.; From Cable System

- 10 - EN 9J27 PREPARATION FOR USE ANTENNA/CABLE CONNECTIONS DIPOLE ANTENNA HOOK UP 1. Push the stem of the Dipole Antenna (accessory) into the hole for antenna at the back of TV/VCR. 2. Connect the flat twin-lead cable from the Dipole Antenna to the 300/75 ohm Matching Adapter(accessory). 3. Plug t...

Page 11 - Set the TV/VCR channel selector to the output; MOBILE CONNECTION; ) The supplied indoor antenna is adequate when

- 11 - EN 9J27 CABLE WITH CONVERTER/DESCRAMBLER BOX OR SATELLITEBOX If your cable service supplies you with a converterbox or if you use a satellite system, you can use thebasic connection shown here.By using this connection you can also record scram-bled channels. However, channel selection must be...

Page 12 - INSTALLING THE BATTERIES; )Open the battery compartment cover by pressing; EXTERNAL INPUT MODE; or

- 12 - EN 9J27 INSTALLING THE BATTERIES 1)Open the battery compartment cover by pressing the cover on the remote unit in the direction of thearrow. 2)Insert 2 “AA” penlight batteries into the battery compartment in the direction indicated by thepolarity (+/-) markings. 3)Replace the cover. EXTERNAL ...

Page 13 - SET UP FOR USE; CHANNEL SET UP FOR THE

- 13 - EN 9J27 SET UP FOR USE You can program the tuner to scan all the channels you receive in your area. NOTE: Channel memory programming is NOT needed when connected to a cable box or satellite box. Just select the TV/VCR channel selector to the output channel of the cable box or satellite box (E...

Page 14 - Select “ENGLISH” or “FRANÇAIS”

- 14 - EN 9J27 CHANNEL SET UP AGAIN Make sure ... • Press the POWER button to turn on the TV/VCR. 1 Select “CHANNEL SET UP” Press the MENU button on theremote control.Press the PLAY/ K or STOP/ L but- ton to point to “CHANNEL SETUP”.Then, press the F.FWD/ B button. 2 Begin auto preset Press the PLAY...

Page 15 - CLOCK SET UP; AUTO CLOCK SETTING; Confirm that the antenna connections are correct.; Select “SETTING CLOCK”; Exit the Auto Clock Setting

- 15 - EN 9J27 CLOCK SET UP (AUTO / MANUAL) Set the clock accurately for proper automatic timerrecording. If the Public Broadcasting Station (PBS) isavailable in your area, follow “AUTO CLOCK SET-TING”. If it is not, follow “MANUAL CLOCK SET-TING”. AUTO CLOCK SETTING You can have the TV/VCR set the ...

Page 16 - MANUAL CLOCK SETTING; In the example below, the clock is to be set to:; TO CHANGE CLOCK SETTING

- 16 - EN 9J27 MANUAL CLOCK SETTING Make sure ... • TV/VCR power must be turned on. In the example below, the clock is to be set to: DATE May 7th, 2002 SETTING TIME 5:40PM 1 Select “SETTING CLOCK” Press the MENU button on theremote control.Press the PLAY/ K or STOP/ L but- ton to point to “SETTINGCL...

Page 17 - DEGAUSSING; After 5 seconds; OFF mode

- 17 - EN 9J27 ON SCREEN DISPLAY To check the Counter, Clock and Channel number on the TV screen, press the DISPLAY button on the remotecontrol. Each time you press the DISPLAY button on the remote control, the TV screen will change as fol-lows: • Counter mode: After 5 seconds, onlythe counter remai...

Page 18 - TV OPERATION; WATCHING A TV PROGRAM; Select the channel number; GAME MODE; TO CANCEL THE GAME MODE; PICTURE CONTROL; Select “PICTURE CONTROL”

- 18 - EN 9J27 TV OPERATION WATCHING A TV PROGRAM 1 Turn on the TV/VCR Press the POWER button to turn on the TV/VCR. 2 Select the channel number Press the CHANNEL K or L button to select your desired channel number or press the number buttonson the remote control. Remember: If the TV/VCR is connecte...

Page 19 - PLAYBACK; Insert a prerecorded tape

- 19 - EN 9J27 PLAYBACK NORMAL PLAYBACK Make sure ... • TV/VCR power must be turned on. 1 Insert a prerecorded tape If the erase-protection tab has been removed, theTV/VCR will start playback automatically. 2 To begin playback Press the PLAY button. 3 To stop playback Press the STOP button when play...

Page 20 - SPECIAL PLAYBACK; TO CANCEL THE RENTAL MODE; RENTAL PLAYBACK; BLANK REPEAT; TO CANCEL THE REPEAT PLAY MODE; AUTO REPEAT PLAYBACK

- 20 - EN 9J27 SPECIAL PLAYBACK This function enables you to improve the picturequality when playing back worn cassettes such asrented tapes. 1 Select “USER’S SET UP” Press the MENU button on theremote control.Press the PLAY/ K or STOP/ L but- ton to point to “USER’S SET UP”.Then, press the F.FWD/ B...

Page 21 - SEARCH; WILL NOT; ZERO RETURN; In the example below:

- 21 - EN 9J27 SEARCH Make sure ... • TV/VCR power must be turned on. • Insert a tape. This function allows you to search easily a beginningpoint that you want to review by rewinding or fastforwarding. NOTE: Zero Return WILL NOT work on a blank tape or a blank portion of a tape. 1 Stop a tape at you...

Page 22 - RECORDING; This unit will ONLY record and view the same channel.; Select the channel to be recorded; Select the tape speed; Press the RECORD button.; Stop recording; Press the STOP button when recording is completed.; NORMAL RECORDING

- 22 - EN 9J27 RECORDING Make sure ... • TV/VCR power must be turned on. • Insert a cassette tape with its erase prevention tab in place. (If necessary, rewind or fast forward the tape tothe point at which you want to begin recording.) NOTE: This unit will ONLY record and view the same channel. You ...

Page 23 - Display; COPYING A VIDEO CASSETTE

- 23 - EN 9J27 This function enables you to set a recording lengthsimply by pressing the REC/OTR button on theTV/VCR. Make sure ... • TV/VCR power must be turned on. • Insert a cassette tape with its erase prevention tabin place. (If necessary, rewind or fast forward thetape to the point at which yo...

Page 24 - TIMER; In the example below, the timer is being set to record:; Select “TIMER PROGRAMMING”; AUTOMATIC TIMER; Set the channel number

- 24 - EN 9J27 TIMER You may set the TV/VCR to start and end a record-ing while you are away. You can set 8 programs torecord on specific days, daily or weekly within a 1year period. In the example below, the timer is being set to record: DATE: July 5th, 2002 SETTING TIME: from 7:30PM to 8:50PMCHANN...

Page 25 - TO CORRECT A PROGRAM; )Press the POWER button to set automatic timer; TIMER PROGRAM EXTENSION

- 25 - EN 9J27 To shift the time schedule of an automatic timerrecording.1)Press the POWER button.2)Repeat step [1] on page 24.3)Press the RECORD button and select the desired program using the PLAY/ K or STOP/ L button. 4)Press the RECORD button again. Each additional push will shift forward thebeg...

Page 26 - TO CHECK THE BEGIN/END TIME; )Press the POWER button so that the REC indicator; HINTS FOR AUTOMATIC; Recording begins automatically at the Start time.; AUTO RETURN; Select “USER’S SET UP”; Press the PLAY button.; WAKE UP TIMER; Use the remote control for this procedure.; Select “WAKE UP TIMER”

- 26 - EN 9J27 TO CHECK THE BEGIN/END TIME 1)Press the POWER button so that the REC indicator goes off. 2)Press the MENU button on the remote control.3)Confirm “TIMER PROGRAMMING” is pointed.4)Press the F.FWD/ B button. The details of pro- grams appear on the TV screen. 5)Press the MENU button on th...

Page 27 - TO CANCEL THE WAKE UP TIMER; Select “SLEEP TIMER”; button until; TO CANCEL THE SLEEP TIMER; MAINTENANCE; chase a good quality VHS Video Head Cleaner.; SERVICING

- 27 - EN 9J27 3 Set wake up time Press the PLAY/ K or STOP/ L but- ton until to point to “TIME”.Press the F.FWD/ B or REW/ s button until your desired wake uptime appears.Each additional push will increase (or decrease) thetime by 10 minutes. 4 Exit the Wake Up Timer setting Press the MENU button o...

Page 28 - TROUBLESHOOTING GUIDE; PROBLEM

- 28 - EN 9J27 TROUBLESHOOTING GUIDE If you have followed the instructions contained in this manual and have difficulty in operating your TV/VCR,locate the PROBLEM in the left column below. Check the corresponding CORRECTIVE ACTION column toremedy the problem. PROBLEM CORRECTIVE ACTION No power. • M...

Page 29 - SPECIFICATIONS

GENERAL SPECIFICATIONS CRT : 9 inch in-line gun, 90˚deflection tube Television system : NTSC-M Video Heads : Rotary two-head Tape width : 1/2 inch Tape speed SP : 33.40mm/sec. LP : 16.67mm/sec. SLP : 11.12mm/sec. Tuner channel TV VHF Low : #2~#6 TV VHF High : #7~#13 TV UHF : #14~#69 CATVVHF : 5A MID...

Page 30 - Printed in Malaysia; SYLVANIA HOME ENTERTAINMENT WARRANTY

Printed in Malaysia 0EMN01906 T4305CF * * * * * SYLVANIA HOME ENTERTAINMENT WARRANTY We appreciate your purchase of a SYLVANIA Home Entertainment product. We take pride in the quality of our products and have manufactured your new Home Entertainment unit to exacting quality standards. We feel confid...

SYLVANIA Manuals

SYLVANIA LC260SS1 User Manual
SYLVANIA LC260SS2 User Manual
SYLVANIA LC260SS2 Manual
SYLVANIA LC220SS2 User Manual
SYLVANIA LC220SS2 Manual
SYLVANIA SRC2109E User Manual
SYLVANIA SRC2109E Manual
SYLVANIA 6615LD User Manual
SYLVANIA 6615LD Manual
SYLVANIA 6513DF User Manual
SYLVANIA 6513DF Manual
SYLVANIA SRT4127P User Manual
SYLVANIA SRT4127P Manual
SYLVANIA 6615LDF User Manual
SYLVANIA 6615LDF Manual
SYLVANIA SRT4127W User Manual
SYLVANIA SRC13ADV User Manual
SYLVANIA SRT2223 User Manual
SYLVANIA SRD2900 User Manual
SYLVANIA SRDV200 User Manual