SVAT CLEARVU10 - Manuals

8 CLEARVU10 SVAT ELECTRONICS now you can see INTRODUCTION Congratulations on your purchase of the CLEARVU10! Use this ultra slim, all-in-one security system to monitor your home or business, and experience the convenience in viewing video on the built-in 19” LCD screen. Correct installation and use ...

9 CLEARVU10 SVAT ELECTRONICS now you can see WHAT IS INCLUDED FEATURES Record up to 240 Days This DVR utilizes the advanced Seagate SV35 hard drive. The 160GB hard drive was designed by Seagate for optimization with DVRs to ensure secure and consistent recording for years. Stylishly Integrated 19...

10 CLEARVU10 SVAT ELECTRONICS now you can see Advanced Motion Activated Recording You can set the DVR to record only when motion is detected and alert you with an audible alarm. You can even set individual cameras to detect motion, and only video from those cameras will be recorded. Motion Mask allo...

11 CLEARVU10 SVAT ELECTRONICS now you can see BUTTONS & CONNECTIONS 19" LCD DVR 1. Monitor Speaker 2. Channel Selection Buttons - Select to display individual cameras in live display and playback. Can also be used to enter numeric passwords (when prompted) 3. Pause Button 4. Navigation / Rev...

12 CLEARVU10 SVAT ELECTRONICS now you can see THINGS TO CONSIDER BEFORE INSTALLATION For best performance, follow these simple guidelines: • Camera(s) should be installed between 8 and 13 feet above the area to be monitored.• To maximize viewing area, ensure there are no obstructions in the camera’s...

13 CLEARVU10 SVAT ELECTRONICS now you can see 5. Connect the 60ft. video/power wire’s male RCA plug to one of the VIDEO IN ports for channel 1-8. CONNECTING ADDITIONAL DEVICES TO THE DVR This DVR has other ports which allow you to connect additional SVAT or third party devices to the system. Please ...

14 CLEARVU10 SVAT ELECTRONICS now you can see CONNECTING A USB CD/DVD WRITER, EXTERNAL HARD DRIVE, OR USB FLASH DRIVE (NOT INCLUDED) FOR ARCHIVING RECORDED FOOTAGE You can connect a plug and play CD/DVD Writer to this CLEARVU10 to back up and archive recorded footage that is on the DVR. Simply plug ...

15 CLEARVU10 SVAT ELECTRONICS now you can see CONNECTING A MICROPHONE (NOT INCLUDED) FOR 2 WAY COMMUNICATION If you connect a microphone to one of the AUDIO IN jacks, you can communicate with computers that are remotely connected to the DVR. After connecting the microphone, simply enable live audio ...

16 CLEARVU10 SVAT ELECTRONICS now you can see USING THE REMOTE CONTROL FOR ONSCREEN NAVIGATION 1 POWER BUTTON Turns the LCD screen or DVR system ON or OFF 2 SETUP BUTTON Enters the setup screen 3 CHANNEL SELECTION BUTTONS Select to display individual cameras in live display and playback. Can also be...

17 CLEARVU10 SVAT ELECTRONICS now you can see CONNECTING AND POWERING ON 1. Insert the power supply wire into the rear DC 12V port on the DVR Insert the power cord into the power supply. 2. Plug the power cord from power supply into the power outlet. We recommend using a surge protected power bar an...

18 CLEARVU10 SVAT ELECTRONICS now you can see SHUTTING DOWN With this DVR you have the option to shut down the entire unit and stop the DVR from recording, or to turn off the LCD screen but continue recording. For security reasons, you must enter your password to power off the system and halt record...

19 CLEARVU10 SVAT ELECTRONICS now you can see MULTI-SCREENS The CLEARVU10 gives you several different viewing options for your cameras. You can choose between Sequence Mode, Single camera, Quad (4 camera), 6 camera, 8 camera, and 8 Camera (Grid). TO CHANGE YOUR CAMERA DISPLAY 1. To change your camer...

20 CLEARVU10 SVAT ELECTRONICS now you can see 1. To change your camera display, click the right mouse button on the Live Display screen. 2. Click the Display icon 3. Press ENTER on the DVR’s button panel. The status bar at the bottom of the screen will read “LIVE DISPLAY EDIT MODE”. 4. On the DVR’s ...

21 CLEARVU10 SVAT ELECTRONICS now you can see USING ZOOM MODE 1. If you are not currently in full screen mode, choose the camera you want to zoom in on and double click the mouse. 2. Click the right mouse button on the Live Display screen. 3. Click the Zoom icon. 4. A toolbar and an inset picture wi...

22 CLEARVU10 SVAT ELECTRONICS now you can see LOCKING THE SCREEN 1. To lock the screen and disable settings, click the right mouse button on the Live Display screen. 2. Click the Key Lock icon. 3. Enter your password (the default password is ‘1234’) and select OK. 4. The status bar at the bottom of ...

23 CLEARVU10 SVAT ELECTRONICS now you can see Continuous Record Mode is the simplest of recording modes. When you power on the DVR, recording will start automatically and the DVR will continue recording until you choose to stop it. The beside each camera title indicates that the camera is in continu...

24 CLEARVU10 SVAT ELECTRONICS now you can see ADVANCED SEARCH The advanced search mode displays a calendar, allowing you to easily search by either time or event for specific days or periods of time. Once the desired footage is found, it can easily be played back and reviewed. ACCESSING THE SEARCH M...

25 CLEARVU10 SVAT ELECTRONICS now you can see 4. To move to a specific time period, click and drag the arrow along the timeline to the specific time period you are looking for. As you drag the arrow you will see the time indicator (next to the play button) change accordingly. 5. When you reach the d...

26 CLEARVU10 SVAT ELECTRONICS now you can see MAIN MENU This section will outline all the settings within each of the system menus. With these menus you can customize the DVR to meet your viewing needs. The three main menus are GENERAL, RECORD, and ARCHIVING. Within these menus are many different su...

27 CLEARVU10 SVAT ELECTRONICS now you can see DISPLAY MENU Within the DISPLAY menu are the following submenus: OSD, MONITOR, SEQUENCE, SPOT-OUT, and SCREENSAVER . The OSD (Onscreen Display) menu allows you to control general screen settings such as camera titles and transparencies. The MONITOR menu ...

28 CLEARVU10 SVAT ELECTRONICS now you can see MENU TRANSPARENCY: When accessing a menu, you have the ability to still be able to see the cameras behind the menu window. Changing the value determines whether the menu is more transparent (making it easier to see the cameras while the menu is open) or ...

29 CLEARVU10 SVAT ELECTRONICS now you can see MOTION POP-UP MODE: When set to ON, any camera that detects motion will be displayed in full screen after the movement occurs. For the set amount of dwell time MOTION POP-UP DWELL: If Motion Pop-Up mode is set to ON, Motion Pop-Up Dwell determines the le...

34 CLEARVU10 SVAT ELECTRONICS now you can see AUTO BRIGHTNESS: Can be set so that the LCD screen turns off after a certain period of inactivity. Recording will continue during this time. You can set the monitor to turn off after 10, 20, 30, 40, 50 or 60 minutes. Choosing “OFF” will disable auto brig...

35 CLEARVU10 SVAT ELECTRONICS now you can see MAKING CHANGES TO THE CAMERA TITLE MENU: 1. In the GENERAL menu, click the CAMERA button. 2. Click the CAMERA TITLE title on the left hand side of the window. 3. A list of cameras is displayed on screen as well as the ON/OFF option for Covert Mode and ea...

36 CLEARVU10 SVAT ELECTRONICS now you can see CHANGING THE CAMERA TITLE 1. Double click the camera title. A virtual keyboard will pop up 2. Enter a title for the camera by clicking each letter individually. The title can be up to 11 characters and can include both numbers and letters. 3. The button ...

37 CLEARVU10 SVAT ELECTRONICS now you can see 11. You will return to the list of cameras, and any changes you made to the numbers will appear in the proper columns.12. When you have made all the desired changes to cameras, click APPLY. If you wish to exit without saving changes, click the in the top...

39 CLEARVU10 SVAT ELECTRONICS now you can see CONTROLLING THE PTZ CAMERA THROUGH THE DVR 1. While in Live Display, click the right mouse button on the Live Display screen to access the screen that allows you to control the PTZ camera. 2. Click the PTZ icon. 3. The PTZ Control screen will pop up. 4. ...

41 CLEARVU10 SVAT ELECTRONICS now you can see ADJUSTING AREA SETUP 1. Click the AREA SETUP button of the camera you wish to change. 2. The camera will be displayed full screen and will be orange in color with a light blue grid covering the entire frame. 3. By default the entire frame is set to detec...

43 CLEARVU10 SVAT ELECTRONICS now you can see SOUND MENU The Sound menu contains the AUDIO and BUZZER submenus. This menu allows you to make changes to audio settings on the microphone as well as turn the beeping sounds of the monitor and remote ON or OFF. MAKING CHANGES TO THE AUDIO MENU 1. From th...

44 CLEARVU10 SVAT ELECTRONICS now you can see NETWORK AUDIO TX: Turning this option ON enables network audio transmission and sends live and playback audio to a connected remote PC. Turning this option OFF disables audio from being sent. NETWORK AUDIO RX: Turning this option ON allows a remote PC co...

45 CLEARVU10 SVAT ELECTRONICS now you can see SYSTEM MENU The SYSTEM menu is where you make advanced changes to the accessibility of the DVR. The submenus within the SYSTEM menu are DATE/ TIME , NETWORK , MAIL , USER MANAGEMENT , SYSTEM MANAGEMENT , and CONTROL DEVICE . The DATE/TIME menu allows you...

46 CLEARVU10 SVAT ELECTRONICS now you can see DATE/TIME: Allows you to manually set the date and time. Click the number which you wish to change. You will see it become outlined in green. Then, click the arrows to change the year, month, day, hour or minute to the desired time. NOTE: If your DVR is ...

47 CLEARVU10 SVAT ELECTRONICS now you can see MAKING CHANGES TO THE MAIL MENU NOTE: The settings in this menu relate directly to setting up the DVR to connect to a network for remote and online viewing. If the DVR is not correctly set up to the network, the settings in this menu may be inaccurate or...

48 CLEARVU10 SVAT ELECTRONICS now you can see ADDING A NEW USER 1. After saving any desired changes to other menus, click the USER MANAGEMENT title on the left hand side of the window. The window will display the list of users. 2. To add a new user, click the ADD button at the bottom of the screen. ...

49 CLEARVU10 SVAT ELECTRONICS now you can see 14. Press OK to return to the USER MANAGEMENT screen. Any new users will show up in the USER ID list. 15. When you have made all the desired changes to the USER MANAGEMENT menu, click APPLY. If you wish to exit without saving changes, click in the top ri...

51 CLEARVU10 SVAT ELECTRONICS now you can see DELETING USERS 1. Double click the user which you wish to delete. 2. The EDIT Screen will pop up. 3. Click DELETE at the bottom of the EDIT window. 4. The user is now deleted. NOTE: Users can not be restored once they are deleted. LOGGING ON TO THE SYSTE...

52 CLEARVU10 SVAT ELECTRONICS now you can see UPDATING THE SYSTEM MANAGEMENT MENU 1. After saving any desired changes to other menus, click the SYSTEM MANAGEMENT title on the left hand side of the window. The window will display a list of settings. 2. To navigate through the SYSTEM MANAGEMENT menu, ...

53 CLEARVU10 SVAT ELECTRONICS now you can see 6. After clicking APPLY, click in the top right corner of the window to exit the DISPLAY menu and return to the GENERAL menu screen. F/W UPDATE: New firmware may be available to download from the SVAT website at http://www.svat.com. Firmware updates will...

55 CLEARVU10 SVAT ELECTRONICS now you can see SAVING THE SYSTEM DATA 1. Insert your USB drive into the USB port on the side of the DVR . 2. Press the SAVE button next to SYSTEM DATA. 3. A Window that says “Success” will pop up when the settings have completed transferring. LOADING SYSTEM DATA 1. Ins...

56 CLEARVU10 SVAT ELECTRONICS now you can see NOTE: Each of the settings within the CONTROL DEVICE menu are described in detail below. SYSTEM ID: Must be different from any other DVRs being accessed by the remote. You can choose between 1-254 for an ID. PROTOCOL: Used to select the protocol (refer t...

57 CLEARVU10 SVAT ELECTRONICS now you can see SMART ALARM: Can be turned ON or OFF. This feature sets the DVR to monitor the hard drive to detect any problems or errors that might be developing. If the DVR detects an error, it will sound an alarm. CHECK INTERVAL: Allows you to set a daily schedule f...

58 CLEARVU10 SVAT ELECTRONICS now you can see 3. The OPERATION option allows you to enable or disable the alarm out setting. Use the buttons to enable or disable this feature. If enabled, you will be able to edit settings for up to 8 alarms. If disabled, alarms will not function if there is an event...

59 CLEARVU10 SVAT ELECTRONICS now you can see MAKING CHANGES TO THE EMAIL NOTIFICATION MENU 6. If you have chosen LATCHED in step 5, you can use the buttons to set the duration of the alarm to be between 5 and 300 seconds or until a user logs on to the system (UNTIL KEY-IN) 7. When you have made all...

60 CLEARVU10 SVAT ELECTRONICS now you can see DISK MANAGE MENU The Disk Manage menu allows you to set a RECORD[ING] TIME LIMIT , Turn the OVERWRITE option ON or OFF, and FORMAT the DVR’s hard drive. MAKING CHANGES TO THE DISK MANAGE MENU 1. Click the DISK MANAGE button. A window with the RECORD TIME...

61 CLEARVU10 SVAT ELECTRONICS now you can see RECORD TIME LIMIT: In accordance with certain local or organizational requirements and data protection laws, it may be necessary to limit the amount of footage being stored on the DVR. The RECORD TIME LIMIT refers to the amount of time that the data will...

63 CLEARVU10 SVAT ELECTRONICS now you can see RECORD MENU The RECORD menu is the area to make changes to recording schedules and activation options. The submenus within the RECORD menu are RECORDING OPERATIONS , TIMER/MOTION SETUP , and ALARM SETUP . 1. If you are not already in the RECORD menu, acc...

64 CLEARVU10 SVAT ELECTRONICS now you can see MAKING CHANGES TO THE RECORDING OPERATIONS MENU 1. Click the RECORDING OPERATIONS title on the left hand side of the window. 2. To navigate through the RECORDING OPERATIONS menu, use the mouse to click the status (OFF, ON, etc) of the setting you wish to...

65 CLEARVU10 SVAT ELECTRONICS now you can see MAKING CHANGES TO THE TIMER/MOTION SETUP MENU The TIMER/MOTION menu is separated into two basic sections: SIZE/FPS/QUALITY/AUDIO, and ACTIVATION. Changes made to the SIZE/FPS/QUALITY/AUDIO window allows you set a schedule and fully customize each camera ...

67 CLEARVU10 SVAT ELECTRONICS now you can see NOTE: This DVR can record up to 120 Frames Per Second (FPS), which is spread out among all 8 channels. At the bottom of this menu screen you will see a “frames remained” counter. If the number beside “frames remained” is a positive number, this means you...

69 CLEARVU10 SVAT ELECTRONICS now you can see NOTE: This menu has 3 different symbols to show the recording modes Empty Block: No recording during this time (set to NONE) Solid Block: Continuous Recording (set to TIMER) Light Blue Outline : Motion Activated Recording (MOTION) MAKING CHANGES TO THE A...

70 CLEARVU10 SVAT ELECTRONICS now you can see ARCHIVE MENU The ARCHIVE menu is the area where you can back up recorded footage to a USB drive or external CD/DVD burner. ARCHIVING VIDEO FOOTAGE TO AN EXTERNAL USB DEVICE 1. Plug your external USB device (jump drive, CD/DVR writer, external hard drive)...

72 CLEARVU10 SVAT ELECTRONICS now you can see 14. Once extracted, the footage is copied to CD or USB. NOTE: Depending on the amount of footage selected for archiving, the extracting and burning process may take several minutes to complete. During this time, the DVR cannot be used. However, archiving...

73 CLEARVU10 SVAT ELECTRONICS now you can see CONNECTING THE DVR TO YOUR ROUTER 1. Power off the DVR by pressing and holding the button on the DVR until the password window pops up. 2. Log off of the system. Using the Channel Selection buttons (or the number pad on the remote control), type in the d...

74 CLEARVU10 SVAT ELECTRONICS now you can see 7. Write down the following information (exactly as it appears on your screen) for the DVR IP ADDRESS, NET CLIENT PORT, and WEB SERVER PORT in the box below. You will write the DDNS SERVER and EXTERNAL IP later. 8. Click the SYSTEM MANAGEMENT title on th...

75 CLEARVU10 SVAT ELECTRONICS now you can see PREPARING YOUR COMPUTER Before setting up your network connection, you have to ensure that your computer’s security settings are configured to allow you to view the footage from the DVR. NOTE: You will need to complete the steps below for EVERY computer ...

76 CLEARVU10 SVAT ELECTRONICS now you can see INSTALLING THE REMOTE VIEWER SOFTWARE ON YOUR PC 1. Place the CD that was included with the DVR system into your computer’s CD-ROM drive. If your computer does not automatically start the install process or open the CD folder, go to Start>My Computer ...

77 CLEARVU10 SVAT ELECTRONICS now you can see 5. The final install screen will confirm that installation was successful. Click ‘Close’. For Vista users: If you are prompted with the “an unidentified program wants to access your computer” security message, click ALLOW. 6. Two icons are created on you...

79 CLEARVU10 SVAT ELECTRONICS now you can see CONNECTING TO AND VIEWING THE DVR REMOTELY (WITHIN YOUR NETWORK) After installing the Remote Viewing Software, you will need to enter your DVR’s settings so you can view the DVR through the software. Once the DVR is properly set up, you will be able to c...

80 CLEARVU10 SVAT ELECTRONICS now you can see 3. The new group is now created. NOTE: Once you have created a connection group, you can add up to 4 DVRs to this group. ENTERING THE DVR’S INFORMATION 1. After creating a connection group, you will need to refer back to the DVR’s information that you wr...

81 CLEARVU10 SVAT ELECTRONICS now you can see ADDITIONAL GROUP SETTINGS 1. To complete the installation you must use the mouse to check or uncheck boxes and select the following custom settings 2. Event: Check the event occurrences that cause the DVR to send entries to the Event Viewer and remote cl...

82 CLEARVU10 SVAT ELECTRONICS now you can see VIDEO OSD: Check or Uncheck the information that is displayed for each channel when a DVR is connected. • Title: When enabled, displays the camera title (i.e. CAM1) in every frame. • Name: Displays the DVR’s name (as it was entered in the “Name” box unde...

84 CLEARVU10 SVAT ELECTRONICS now you can see FINDING YOUR EXTERNAL IP Now you will need to find your external IP address. This will be the address you will be entering in order to access the DVR from outside your network (over the internet). There are many ways to find your external IP address. The...

85 CLEARVU10 SVAT ELECTRONICS now you can see IF SUCCESSFUL The Remote Viewing Software should pop up. 1. If prompted, enter the DVR Information (the same information that you entered when you previously set up a connection group) and press OK 2. Select the group you wish to connect to from the drop...

87 CLEARVU10 SVAT ELECTRONICS now you can see NOTE : If you were NOT able to view your DVR through your external IP address, contact SVAT’s toll-free number for technical support. If you can not access your external IP you will likely not be able to view your DVR through a DDNS website. FORWARDING O...

89 CLEARVU10 SVAT ELECTRONICS now you can see 13. In the IP address field, type in your external IP address. You may also have the option to “use detected IP address”, which will fill your IP address in for you. 14. Leave all of the other options as is, and click “Create New Host”. 15. Your dynamic ...

90 CLEARVU10 SVAT ELECTRONICS now you can see CONFIGURING THE DVR’S DDNS INFORMATION 1. If you are not already in the Network Menu, access GENERAL menu by clicking the right mouse button on the Live Display screen. 2. Click the SETUP icon. 3. Enter your password (the default password is ‘1234’) and ...

91 CLEARVU10 SVAT ELECTRONICS now you can see 9. Enter the DynDNS address (example: myname1234.dyndns.org) by clicking each letter individually. 10. The button allows you to move between capital letters and lowercase and accesses the character menu for periods. The button can be used to delete lette...

92 CLEARVU10 SVAT ELECTRONICS now you can see SENDING A TEST EMAIL You can have the DVR send a test email to make sure that the DVR is properly connected to the Internet and ensure that the email addresses entered under the USER IDs are correct. 1. If the box next to the DEFAULT SERVER title is not ...

93 CLEARVU10 SVAT ELECTRONICS now you can see CONFIGURING MAIL SETTINGS You can turn OFF the DEFAULT SERVER and adjust the SERVER, PORT, SECURITY, USER, and PASSWORD boxes so email notifications are sent through the mail server of your personal e-mail address. NOTE: It is recommended that you leave ...

94 CLEARVU10 SVAT ELECTRONICS now you can see MAKING CHANGES TO THE RECORD MENU The Record Menu allows you to make the same changes to the DVR’s settings that you can make through the DVR’s “Record” menu. You can set the Recording Schedule, Pre and Post Event Recording Times, and Alarm and Continuou...

95 CLEARVU10 SVAT ELECTRONICS now you can see MAKING CHANGES TO THE CAMERA MENU The Camera Menu allows you to make the same changes to the DVR’s settings that you can make through the DVR’s “Camera” menu. The Camera menu allows you to change each cameras title, place and remove cameras from covert m...

96 CLEARVU10 SVAT ELECTRONICS now you can see MAKING CHANGES TO THE SOUND MENU The Sound Menu allows you to make the same changes to the DVR’s settings that you can make through the DVR’s “Sound” menu. Live Audio can be turned on or off and the Audio Monitoring Channel selected. Also, the audio TX a...

97 CLEARVU10 SVAT ELECTRONICS now you can see MAKING CHANGES TO THE EVENT/SENSOR MENU The Event/Sensor Menu allows you to make the same changes to the DVR’s settings that you can make through the DVR’s “Event/Sensor” menu. E-mail alerts can be turned on or off, alarm inputs can be adjusted, and all ...

98 CLEARVU10 SVAT ELECTRONICS now you can see MAKING CHANGES TO THE SYSTEM MENU The System Menu allows you to make the same changes to the DVR’s settings that you can make through the DVR’s “System “ menu. In this menu the DVR’s system information is displayed. You can also make changes to the User ...

99 CLEARVU10 SVAT ELECTRONICS now you can see REFERRING TO THE EVENT VIEWER FOR EVENTS AND ACTIVITY 1. The Remote Software will keep a log of all events while the computer is connected to the DVR. To view a list of events click the EVENT VIEWER button . 2. The log will display the name of the DVR, t...

102 CLEARVU10 SVAT ELECTRONICS now you can see FINDING PREVIOUSLY RECORDED FOOTAGE 1. Click the SEARCH button in Live Display mode. You will switch to search mode.2. The time line at the bottom of the display is an overview of all footage recorded over a 24 hour period. 3. If you know both the date ...

103 CLEARVU10 SVAT ELECTRONICS now you can see 2. The archiving screen will pop up. 3. Use the dropdown menus to choose the start and end time of the footage you would like to archive. In the example (see right), footage between 10:44 am and 15:44 (3:44pm) will be archived. 4. Choose which cameras y...

104 CLEARVU10 SVAT ELECTRONICS now you can see SENDING A STILL IMAGE TO YOUR PRINTER 1. During playback, you can print a still image by clicking the PRINT button (an active printer connected to the PC is required). 2. A window displaying your printer settings will pop up .3. Choose the appropriate p...

105 CLEARVU10 SVAT ELECTRONICS now you can see USING THE BACKUP PLAYER TO VIEW ARCHIVED FOOTAGE ON YOUR PC NOTE: The Backup Player is also used to view footage that was saved directly from the DVR to a USB drive or archived to a DVD or CD (USB Drive, and external CD/DVD writer not included). To view...

106 CLEARVU10 SVAT ELECTRONICS now you can see 6. You can use the up and down arrows of the quick search (date) and quick search (time) buttons on the left hand side of the controls to select and adjust the specific time of the footage you would like to review (for larger files). 7. The speed of the...

109 CLEARVU10 SVAT ELECTRONICS now you can see Compatible PTZ Protocol Company Protocol CBC Ganz ZC-PT CBC CBC(Ganz) Win4net WSD 7425D Saeilo PTC400C Sensormatic Sensormatic i3DVR i3DVR-SD i3DVR i3DVR-Z1200 i3DVR i3DVR-Z2200 Samsung SamsungMRX1000 Fastrax Fastrax II-2 Fastrax Fastrax II BOSCH Philip...

ACCESSORY - CAMERA Model# CV67 www.svat.com Hi-Res Security Camera Indoor/Outdoor CCD Color Camera w/ Night Vision Version 1.0 INSTRUCTION MANUAL SVAT ELECTRONICS now you can see

112 CLEARVU10 SVAT ELECTRONICS now you can see Table of Contents 1. WHAT IS INCLUDED ....................................................................................................................................... 1122. CAMERA FEATURES AND FUNCTIONS...............................................

115 CLEARVU10 SVAT ELECTRONICS now you can see 7. DRILLING TEMPLATE DRILL HOLES IN THESE POSITIONS To wall mount the camera, drill three holes using a 3/16" drill bit and the template below. Insert the supplied wall anchors into holes and secure camera to wall with supplied screws.

116 CLEARVU10 SVAT ELECTRONICS now you can see Customer Information Card Contact Name:Company:Address:Postal Code:Phone Number:Email:Model Number of Product:Serial Number of Product:Purchase Date:Place of Purchase: NOTE: We recommend that you keep a record of your purchase receipt with your manual f...