Page 2 - Now You Can See
CV0104DVR www.svat.com SVAT ELECTRONICS Now You Can See
Page 3 - Graphic Symbol Explanation:; PRODUCT W; CAUTION
Graphic Symbol Explanation: The lightning flash with arrowhead symbol, within an equilateral triangle, is intended toalert the user to the presence of uninsulated “dangerous voltage” within the product’senclosure that may be of sufficient magnitude to constitute a risk of electric shock topersons. T...
Page 4 - ABLE OF CONTENTS; WHA
CV0104DVR 1 SVAT ELECTRONICS Now You Can See T T ABLE OF CONTENTS ABLE OF CONTENTS WHAT IS INCLUDED ............................................................1WHAT IS COMPATIBLE ........................................................1SAFETY PRECAUTIONS................................................
Page 5 - SAFETY; Do not drop the product or subject them to physical shocks.; It can damage the product.; Do not spill liquid of any kind on the product.
CV0104DVR 2 SVAT ELECTRONICS Now You Can See SAFETY SAFETY PRECAUTIONS PRECAUTIONS Disposal of Old Electrical & Electronic Equipment (Applicable in the EuropeanUnion and other European countries with separate collection systems). This symbol on the product or on its packaging indicates that this...
Page 6 - FEA
CV0104DVR 3 SVAT ELECTRONICS Now You Can See 1. INTRODUCTION 1. INTRODUCTION The CV0104DVR is a feature packed digital video recorder that can record four differentcamera views simultaenously and play it back at a smooth 30 frames per second.Customize the recording and set a 24 hour recording schedu...
Page 7 - ALLA; CONNECTORS ON THE REAR PANEL; ) Your system is now installed and ready for use.
CV0104DVR 4 SVAT ELECTRONICS Now You Can See 2. INST 2. INST ALLA ALLA TION TION CONNECTORS ON THE REAR PANEL Please setup the connection by following the illustration shown below (detailedinstructions on using the network function can be found in Section 9): 1) Plug the power cord into your DVR and...
Page 8 - AND FUNCTION OF EACH P; CH 1 screen display.
CV0104DVR 5 SVAT ELECTRONICS Now You Can See 3. NAME 3. NAME AND FUNCTION OF EACH P AND FUNCTION OF EACH P ART ART 3.1 FRONT PANEL 1. Quad screen display. 2. CH 1 screen display. 3. CH 2 screen display. 4. CH 3 screen display. 5. CH 4 screen display. 6. MENU: Menu button. 7. Up direction button. 8. ...
Page 9 - TING PROCEDURE
CV0104DVR 6 SVAT ELECTRONICS Now You Can See 4. OPERA 4. OPERA TING PROCEDURE TING PROCEDURE 4.1 POWERING ON This DVR is built to be on at all times, and therefore should be connected to a surgeprotected power bar (UPC power backup). Use the power bar's switch to turn the unit offand on. This is esp...
Page 11 - Main Menu
CV0104DVR 8 SVAT ELECTRONICS Now You Can See 5. SYSTEM SETUP 5. SYSTEM SETUP 5.1 MENU 1. Main Menu 2. Menu Layer Indication: The device consists of four menu layers. : First Menu Layer (Main Menu) : Second Menu Layer : Third Menu Layer : Fourth Menu Layer 3. Menu Operation and SetupPress the up or d...
Page 12 - Press the up and down buttons to move the cursor.
CV0104DVR 9 SVAT ELECTRONICS Now You Can See 5.2 SYSTEM SETUP 1. Cursor (>) position indicates the current function selected. 2. Press the up and down buttons to move the cursor. 3. Press ENTER button to proceed. 4. Press MENU button to exit “System Setup”. 5. “System Setup” is situated on the se...
Page 15 - Press ENTER to show the display above.
CV0104DVR 12 SVAT ELECTRONICS Now You Can See 5.2.2.1 CHANGE PASSWORD 1. Press ENTER to show the display above. 2. Enter the current password (CURRENT PASSWORD). 3. Enter new password (NEW PASSWORD). 4. Confirm the new password (CONFIRM PASSWORD). 5. When password change is successful, the system wi...
Page 18 - CH1 TITLE CAMERA1
CV0104DVR 15 SVAT ELECTRONICS Now You Can See 5.3 CAMERA SETUP 1. Camera Enable - Select this option to change the camera view combination. For example, if you select (- - - -), all camera channels will be disabled, and a blackscreen will be displayed. If you select (1 2 3 4), all cameras channels w...
Page 19 - Record Enable - Press ENTER to switch the channel recording on/off.
CV0104DVR 16 SVAT ELECTRONICS Now You Can See 5.3.1 CAMERA SETUP 1. Camera Select - Select the camera channel to which you would like to make changes (CH 1-4). 2. Record Enable - Press ENTER to switch the channel recording on/off. 3. Motion Detection - Press ENTER to switch the motion detection func...
Page 20 - Record Type - Press ENTER to select between QUAD and EACH mode. QUAD
CV0104DVR 17 SVAT ELECTRONICS Now You Can See 5.4 RECORD SETUP 1. Record Type - Press ENTER to select between QUAD and EACH mode. QUAD mode will record all four cameras, but will not let you view each camera individuallyduring playback. EACH mode will record all four cameras and allow you to vieweac...
Page 22 - Press ENTER to setup “ON” or “OFF”, whether to trigger the alarm
CV0104DVR 19 SVAT ELECTRONICS Now You Can See 5.5 BUZZER SETUP 1. ALARM ALERT: Press ENTER to setup “ON” or “OFF”, whether to trigger the alarm when motion event has been detected (this setup is only active when the system isunder record status and schedule record is setup to "M" (Mix). 2. V...
Page 23 - Press and button to move the cursor to the desired item
CV0104DVR 20 SVAT ELECTRONICS Now You Can See 5.6 EVENT LIST 1. Cursor (>) position indicates the current function selected. 2. Press and button to move the cursor to the desired item 3. Press ENTER to proceed. 4. Press MENU to exit “EVENT LIST” selection. 5. “EVENT LIST” is situated on the secon...
Page 24 - Press and button to select the desired time and date.
CV0104DVR 21 SVAT ELECTRONICS Now You Can See 5.6.1 TIME SEARCH 1. TIME SEARCH: Displays system recording time (begin and end). 2. Press and button to select the desired time and date. 3. Press ENTER to setup playback starting time and date. 4. Press MENU to exit “TIME SEARCH” selection. 5. Press PL...
Page 25 - Displays all recording events, every page consists of 7 events,
CV0104DVR 22 SVAT ELECTRONICS Now You Can See 5.6.2 EVENT SEARCH 1. EVENT SEARCH: Displays all recording events, every page consists of 7 events, and maximum 63 stored events. 2. Press PLAY button to play the selected event. BEGIN: END: 05/01/15 15:00:01 05/01/15 15:00:06 Displays the beginning and ...
Page 26 - displays the capacity of the MASTER HDD.
CV0104DVR 23 SVAT ELECTRONICS Now You Can See 5.7 HARD DRIVE SETUP 1. When item “OVERWRITE” has been selected, press ENTER to enable overwritewhen both MASTER or SLAVE HDD is full (2 options: OVERWRITE or STOP). 2. MASTER HDD: displays the capacity of the MASTER HDD. 3. MASTER HDD USED: displays the...
Page 27 - When proceeding “FORMAT” function, the above display will be shown.
CV0104DVR 24 SVAT ELECTRONICS Now You Can See 5.7.1 FORMAT 1. When proceeding “FORMAT” function, the above display will be shown. 2. When password entered is correct, the screen will display the message“PASSWORD CORRECT”, “HDD FORMATTED” (flashes 3 times), indicating harddisk format is successful. 3...
Page 28 - NETWORK REMOTE CONTROL; NETWORK DVR SETUP; Online with DHCP Server
CV0104DVR 25 SVAT ELECTRONICS Now You Can See 6. NETWORK REMOTE CONTROL 6. NETWORK REMOTE CONTROL (OPTIONAL) (OPTIONAL) 6.1 NETWORK DVR SETUP Connect the RJ-45 cable to the network port on the back of the DVR, and the other endto your router. Use IPEdit.exe to test the DVR. The network access softwa...
Page 29 - CONNECTING NETWORK DVR
CV0104DVR 26 SVAT ELECTRONICS Now You Can See 6.1.2 ONLINE WITHOUT DHCP SERVER (STATIC IP) 1. Use IPEdit.exe to find the installed Network DVR. 2. The Internet DVR without IP allocated by DHCP will have a default IP Address of 169.254.1.13 3. Select this Internet DVR on the Camera List Window. 4. Th...
Page 30 - Setup similar to “6.1 Network DVR Setup”.
CV0104DVR 27 SVAT ELECTRONICS Now You Can See 6.2.1 ONLINE USING Setup similar to “6.1 Network DVR Setup”. 6.2.2 ONLINE USING ADSL (PPPOE) ROUTER Setup similar to “6.4.3.3 Connect to ADSL by PPPoE mode”. 6.2.3 ONLINE USING DDNS SERVER (RECOMMENDED) The DDNS service provides the dynamic IP to users t...
Page 31 - A. Open Internet Explorer under “Tools” and select “Internet Options”.
CV0104DVR 28 SVAT ELECTRONICS Now You Can See 6.2.4.1 ONLINE CONNECTION Before entering remote connection, install ActiveX (If you are running Windows XP youmost likely have it) and check your browser setup by following the procedures below: A. Open Internet Explorer under “Tools” and select “Intern...
Page 32 - Change ActiveX settings to the ones seen above
CV0104DVR 29 SVAT ELECTRONICS Now You Can See Change ActiveX settings to the ones seen above
Page 33 - Download ActiveX Control
CV0104DVR 30 SVAT ELECTRONICS Now You Can See The graphic below will be shown the first time you install the ActiveX Control. Pleaseselect "Yes" to accept installation. Download ActiveX Control Live view will be displayed when installation is successful. Live display under ActiveX mode
Page 34 - Remote control DVR - Main Menu
CV0104DVR 31 SVAT ELECTRONICS Now You Can See 6.3 MAIN DISPLAY Remote control DVR - Main Menu 1. Live display. 2. DVR control button. 3. Video setup. 4. Configuration: Enter detail setup Recording: Displays recording setup menu (for video recording). Snapshot: Pop-up window displays live images, rig...
Page 35 - Image Recording Setup Display:
CV0104DVR 32 SVAT ELECTRONICS Now You Can See 6.3.2 VIEW Two types of display method:1. Resizable: Adjustable image size. 2. Actual size: The actual image size. 6.3.3 ROTATE Four types of rotate settings:1. Rotate 0: Default state 2. Rotate 180: Rotate the image by 180 degrees. 3. Flip horizontal: I...
Page 37 - Brightness
CV0104DVR 34 SVAT ELECTRONICS Now You Can See 6.3.8 RESOLUTION SETTING The network DVR provides six resolution settings. The user can select the quality settingfrom the “Resolution” list box.• 176 x 144 • 160 x 120 • 320 x 240 • 352 x 288 • 640 x 480 • 704 x 576 Note: The device supports auto video ...
Page 39 - To setup follow the steps below:
CV0104DVR 36 SVAT ELECTRONICS Now You Can See 6.4.2.2 NEW USER / CHANGE PASSWORD Enter a new user name and password information to create a new user account, or enteran existing user account, then set a new password to replace the old password, andselect “OK” to create the account or change password...
Page 41 - Connection Message Send to User
CV0104DVR 38 SVAT ELECTRONICS Now You Can See Note: If item "Send mail after connected" is selected, then the Network DVR will send a mail that contains the message "Dial Up IP Address/ Netmask/ Gateway/ DNS Server"will be mailed to the preset e-mail address. Connection Message Send ...
Page 42 - Select browse and select the .bin firmware file.
CV0104DVR 39 SVAT ELECTRONICS Now You Can See After registering the domain name, please enter the information supplied by theadministrator to the Network DVR DDNS Account Setting. Select "Enable" button to start-up DDNS server, and press "Submit" button to save the setting. 6.4.5 FIR...
Page 43 - Firmware Update Display.
CV0104DVR 40 SVAT ELECTRONICS Now You Can See Firmware Update. Press "here" button (1) to update Firmware. Press "here" button (2) to delete the file. Themessage below displays the writing progress of the firmware update. When Firmwareupdate is completed, it will show 100%, and a mes...
Page 44 - Problem; No display on television
CV0104DVR 41 SVAT ELECTRONICS Now You Can See 7. TROUBLESHOOTING 7. TROUBLESHOOTING Problem Solution No display on television 1. Make sure all RCA and power cables areplugged in securely and in their proper places. 2. Make sure your television is on the correct channel (input mode). DVR not recordin...
Page 47 - ARDING
CV0104DVR 44 SVAT ELECTRONICS Now You Can See 9. PORT FOR 9. PORT FOR W W ARDING ARDING YOUR ROUTER FOR USE YOUR ROUTER FOR USE WITH WITH A A NETWORK DVR NETWORK DVR 1. Belkin Router 2. DLINK Wireless Router 3. LINKSYS Wireless Router 4. LINKSYS Wired Router 5. Westell Router 6. Netgear Router 7. Ne...
Page 48 - YNKSYS WIRELESS ROUTER
CV0104DVR 45 SVAT ELECTRONICS Now You Can See 2. D-LINK ROUTER 2. D-LINK ROUTER The port forwarding process is dependant on the brand and model number of the routerbeing used. Port forwarding of a router is required with your system to allow user accessto your network device. Regardless of the DLINK...
Page 49 - LINKSYS WIRED ROUTER
CV0104DVR 46 SVAT ELECTRONICS Now You Can See Step 2: Enter the user name and password as shown below ( admin by default) and press the OK button. Step 3: Select the Applications and Gaming tab. Step 4: Select the Port Range Forwarding tab. In the Application column enter a description of your DVR. ...
Page 50 - ROUTER
CV0104DVR 47 SVAT ELECTRONICS Now You Can See 5. WESTELL 5. WESTELL ROUTER ROUTER The port forwarding process may vary depending on the brand and model number of therouter being used. Port forwarding of a router is required to allow user access to yournetwork device. Regardless of the Westell Router...
Page 51 - OPIA
CV0104DVR 48 SVAT ELECTRONICS Now You Can See Step 2: Enter ‘admin’ in the User Name and ‘password’ in the Password dialog box to enter the Westell configuration page. Step 3: Select the Services button in the Security menu Step 4: In the Services menu, select the Add Custom Service button In the Se...
Page 52 - OROLA
CV0104DVR 49 SVAT ELECTRONICS Now You Can See Step 6: In the Port Range screen, proceed as follows:In the Service Name field, type DVR In the Global Port Range field, enter in the first box, the first number of the port you need to port forward (e.g. 80) and in the second box the ending port number ...
Page 54 - TIONS
CV0104DVR 51 SVAT ELECTRONICS Now You Can See 10. DVR SPECIFICA 10. DVR SPECIFICA TIONS TIONS Functionality ..................................................Simplex Video Compression ........................................Modified MJPEG Resolution .....................................................
Page 55 - Operating Environment
CV0104DVR 52 SVAT ELECTRONICS Now You Can See Housing Color ................................................Graphite Grey Power Input ....................................................DC 12V 2A Power Adapter Input ......................................AC 100-250V 50/60Hz Cooling .....................
Page 56 - T SUPPORTS CRIME ST; CRIME ST
CV0104DVR www.svat.com SVAT ELECTRONICS Now You Can See SV SV A A T SUPPORTS CRIME ST T SUPPORTS CRIME ST OPPERS OPPERS Crime Stoppers programs are operated as non-profit charities and are managed by avolunteer board of directors who raise funds and pay rewards to individuals whoanonymously call wit...
Page 57 - CRIME ST
CV0104DVR www.svat.com SVAT ELECTRONICS Now You Can See SV SV A A T SUPPORTS CRIME ST T SUPPORTS CRIME ST OPPERS OPPERS To receive more information about Crime Stoppers or to make a charitable donationplease fill in the fields below, cut on the dotted line and mail in. NAME:_________________________...
Page 58 - NOTES
CV0104DVR 55 SVAT ELECTRONICS Now You Can See NOTES
Page 60 - D i s c l a i m e r
SVAT ELECTRONICS Now You Can See Model # CV0104DVR www.svat.com w w w . s v a t . c o m D i s c l a i m e r S VAT d o e s n o t e n d o r s e a n y o f S VAT p r o d u c t s f o r a n y i l l e g a la c t i v i t i e s . S VAT i s n o t r e s p o n s i b l e o r l i a b l e i n a n y w a ys h a p e ...
