Stiga 4WD - Manuals

34 ENGLISH EN 2.3.3 Rear mounting The cutting deck’s rear section is secured with the pins in fig. 13. 2.4 Controls, 92/107 M 2.4.1 Cutting height adjustment The cutting height can be adjusted between 30 and 85 mm. The setting can be adjusted to a number of fixed positions using the lever. See fig. ...

36 ENGLISH EN 3.5.2 Basic setting, 92/107 M, 121 M See fig. 17 and perform basic setting of 92/107 M and 121 M as follows:1. Place the machine on a level floor. Requirements for floor flatness: ±1 mm/m. No slope towards a floor drain or similar may occur in front of or behind the machine. 2. The tyr...

38 ENGLISH EN 5.6.1 Separate blades The blades are replaceable. When replacing, both blades on the same blade bar must be replaced to avoid imbalance.Tightening torque: Screws (27:P) - 24 NmShear bolts (27:Q) - 9.8 NmIn the event of a collision, the shear bolts (27:Q) can break and the blades bend b...