Stiga 4WD - Manual
Stiga 4WD – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 7 – ENGLISH; Electric cutting height adjustment; ASSEMBLY
- Page 9 – Check that the grass that is to be cut is
- Page 11 – The use of such parts and accessories; DESIGN REGISTRATION; GGP reserves the right to make alterations to the
S T I G A P A R K
4WD
9 2 M
1 0 7 M
1 0 7 M H D
1 2 1 M
1 1 0 C o m b i P r o
1 2 5 C o m b i P r o
8211-0543-03
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Was this manual helpful?
About this manual
- Brand
- Stiga
- Model
- 4WD
- Document type
- Manual
- Language(s)
- English
- Pages
- 12
- File size
- 702.1 KB
- Format
Summary
34 ENGLISH EN 2.3.3 Rear mounting The cutting deck’s rear section is secured with the pins in fig. 13. 2.4 Controls, 92/107 M 2.4.1 Cutting height adjustment The cutting height can be adjusted between 30 and 85 mm. The setting can be adjusted to a number of fixed positions using the lever. See fig. ...
36 ENGLISH EN 3.5.2 Basic setting, 92/107 M, 121 M See fig. 17 and perform basic setting of 92/107 M and 121 M as follows:1. Place the machine on a level floor. Requirements for floor flatness: ±1 mm/m. No slope towards a floor drain or similar may occur in front of or behind the machine. 2. The tyr...
38 ENGLISH EN 5.6.1 Separate blades The blades are replaceable. When replacing, both blades on the same blade bar must be replaced to avoid imbalance.Tightening torque: Screws (27:P) - 24 NmShear bolts (27:Q) - 9.8 NmIn the event of a collision, the shear bolts (27:Q) can break and the blades bend b...
