Page 2 - IMPORTANT SAFETY INSTRUCTIONS
1. Read these Instructions – All the safety and operating instructions should be read before this product is operated. 2. Keep these Instructions – The safety and operating instructions should be retained for future reference. 3. Heed all Warnings – All warnings on the appliance and in the operating...
Page 3 - C A U T I O N; To reduce the risk of electric shock, do not; CAUTION
21. Lightning – For added protection for this product during a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the product due to lightning and power-line surges...
Page 4 - ASSEMBLY
Remove all the parts from the box. Please check to make sure the following items are included with the main unit in the carton: (1) Platter (2) Slip mat (3) Counterweight (4) 45-rpm adapter (5) Headshell (6) AC cord (7) RCA cable (8) Target light (9) Operating instructions (10) Cloth dust cover 1) C...
Page 5 - TONE ARM AND CARTRIDGE SETTINGS
The third adjustment is the needle (or stylus) pressure. Start with the cartridge-headshell assembly mounted into the tone arm. Remove any needle protectors provided. With tone arm free, adjust the tone arm counterweight by rotating the rear section until the tone arm floats in a balanced condition ...
Page 6 - PART NAMES & FUNCTIONS
5) STROBE DOTS The dots around the edge of the platter are used in conjunction with the light located inside the motor ON/OFF switch. While the platter is in rotation, the dots help to indicate the speed of rotation. The speed is lower than the displayed speed (33,45,78) when the dots are flowing to...
Page 7 - STANDARD TEST CONDITION:
19) COUNTERWEIGHT Use this to balance the tone arm and to adjust the stylus pressure. See “tone arm and cartridge settings” for proper adjustments. 20) 45-RPM ADAPTOR HOLDER Place on the attached 45-rpm adaptor here. Push down the rear side of 45 rpm adaptor to take it. 21) EXTRA STYLUS HOLDER Place...
Page 8 - SPECIFICATIONS
SPECIFICATIONS Time for Speed Change Less than 0.2 sec. from 33 1 / 3 to 45 rpm. Less than 0.2 sec. from 45 to 33 1 / 3 rpm. Less than 0.5 sec. from 33 1 / 3 to 78 rpm Audio Output Phono/Line output TONEARM SECTION: Type Static balanced S shaped tone arm with detachable headshell Effective Arm Lengt...
Page 9 - following the
Stanton Magnetics, Inc. – Warranty Provision – Returns for Repairs or Replacement WARRANTY RETURNS Through Stanton’s authorized dealers around the World, Stanton, or one of Stanton’s authorized distributors outside the U.S., will, without charge, repair or replace, at the sole discretion of the enti...
Page 10 - c u t a l o n g d o t t e d l i n e
S TA N T O N W A R R A N T Y R E G IS T R A T IO N C A R D P E R S O N A L IN F O P R O D U C T IN F O N am e A d d re ss C it y S ta te Z ip C o u n tr y Te le p h o n e M o d el N u m b er S er ia l N u m b er D at e o f P u rc h as e W h er e d id y o u b u y th is p ro d u ct ? If yo u h a ve in...