Stanton SMX.311 - Manuals - manualsarea.com

Page 2 - important Safety instructions; ii; Warning; To reduce the risk of electric shock, do not remove any cover.; CaUTion

important Safety instructions 1. read instructions – All the safety and operating instructions should be read before this product is operated. 2. retain instructions – The safety and operating instructions should be retained for future reference. 3. Heed Warnings – All warnings on the appliance and ...

Page 3 - Contents; iii

Contents 1. introduction ................................................................................................................................................................ 1 1.1. Welcome to the SMX.311! ......................................................................................

Page 4 - introduction; Let’s summarize the main SMX.311 features:

introduction 1. introduction 1.1 Welcome to the SMX.311! Thank you for purchasing the SMX.311. Before starting, please check that you have received the following items: • SMX.311 unit • AC Adaptor • User Manual Now that you have checked that everything was included in the box, let’s talk about the S...

Page 5 - Quick Setup Diagram

Quick Setup Diagram 2. Quick Setup Diagram Review this setup diagram. (Figure 2.1) Make sure all faders are at "zero" and all devices are OFF. First, connect all input sourcesand processors. Next, connect your microphone and monitor headphones. Finally, connect the stereo outputs to the powe...

Page 6 - Top Panel

SMX.311 Description (Top Panel) 3. SMX.311 Description 3.1 Top Panel (Figure 3.1) 3 Figure 3.1

Page 8 - rear Panel; Turns the mixer ON or OFF.

SMX.311 Description (rear Panel) 5 3.2 rear Panel (Figure 3.2) 17. Power Switch: Turns the mixer ON or OFF. 18. Power Connector: While the power is switched OFF, plug the power supply into the mixer ﬁrst, and then plug it into the outlet. 19. booth output: Using a RCA cable, connect from the SMX.311...

Page 9 - front Panel; Standard 1/4” headphone output connector.

SMX.311 Description (front Panel) 3.3 front Panel (Figure 3.3) 6 Figure 3.3 25. Microphone input (Mic): Connect a standard unbalanced (1/4") microphone. 26. Headphone output: Standard 1/4” headphone output connector.

Page 10 - Troubleshooting; Turn down the Input Gain Control. Check EQ settings.

Troubleshooting 4. Troubleshooting 7 Problem / Symptom Possible Cause / Solution no Sound. Is the power ON? Based on your connections, check that youhave properly set the Channel Input (Phone-Line). Make surethat the Input Gain, Channel Fader, and Master output areturned up. Make sure the channels a...

Page 11 - registration Card; Thank you for choosing Stanton!

registration Card Thank you for choosing Stanton! Your satisfaction is extremely important to us. We proudly stand behind the quality of our work and appreciate that you put your trust in us.Registering your product will help us guarantee that you are kept up to date on our latest advances. Warranty...

Page 12 - Stanton Warranty

Stanton Warranty Stanton Warranty Through Stanton's authorized dealers around the World, Stanton, or one of Stanton's authorized distributors outside the U.S., will, without charge,repair or replace, at the sole discretion of the entity responsible for making the repair or providing the replacement,...

Page 13 - Specifications

Speciﬁcations Speciﬁcations 10 input / output impedance & sensitivity: Line 47k ohm /-14 dBV +/-0.1 dB (200mV) Phono 47k ohm /-50 dBV +/-0.1 dB (3.16mV) Mic 10k ohm /-54 dBV +/-0.1 dB (2mV) Master 1k ohm /0 dB (1V) +/-2 dB Master Bal (Load=600 ohm) 600 ohm /+4 dBm (1.23V) +/-2 dB Phones (Load=32...

Page 14 - notes

notes ........................................................................................................................... ........................................................................................................................... .................................................