Stanton M304 - Manuals

D E S C R I P T I O N O F F U N C T I O N S 18. Master output level - Controls the overall output level of the mixer. 19. Output meters - These LEDs let you know if the audio coming out of the mixer is loud enough (or too loud!). If the LEDs reach the red,the mixer is probably clipping, or distortin...

D E S C R I P T I O N O F F U N C T I O N S Power : This is the power switch to turn the mixer "ON" or "OFF" AC IN : This is the Input connection for the included power supply. Send and Return : These connectors are used to connect an outboard signal processor (such as the Stanton DF...

Removing a fader : 1. Make sure mixer is powered off and power supply is disconnected from back of mixer. 3. Remove the fader to be cleaned or replaced by unscrewing the 2 outer screws on the fader plate (removing the 2 inner screws will detach thefader from the fader plate). 4. Disconnect the fader...

Line Inputs: 2 (RCA) x 3 channels, -10 dBV /10 kOhm Phono Inputs 2 (RCA) x 3 channels, -50 dBV / 47 kOhm Mic Inputs 1(1/4")/ 1 XLR -50 dBV /4.7 kOhm Return Inputs 2 (1/4"), -10 dBV / 10 kOhm Send Outputs 2 (1/4"), -10 dBV Master Outputs 2 (1/4”) Balanced/ (RCA) unbalanced, -2 dBu balance...

W A R R A N T Y Stanton Magnetics, Inc. – Warranty Provision – Returns for Repairs or Replacement WarrantyThrough Stanton’s authorized dealers around the World, Stanton, or one of Stanton’sauthorized distributors outside the U.S., will, without charge, repair or replace, at the solediscretion of the...