Page 2 - TABLE OF CONTENTS; Page; SAFETY INSTRUCTIONS
TABLE OF CONTENTS 2 Conditioning Guidelines 13 Warm-up and Cool-Down 14 Warranty 15 Product Parts Drawing 16 Parts List 17 Fax/Mail Ordering Form 19 Page Page Safety Instructions 2 Before You Begin 4 Hardware Identification Chart 5 Assembly Instructions 6 Operational Instructions 10 Storage 11 Maint...
Page 3 - THANK YOU FOR PURCHASING THE; AeroPilates Performer XP615; AeroPilates Performer XP615 at the factory with the exception; CALL US FIRST
THANK YOU FOR PURCHASING THE AeroPilates Performer XP615 To help you get started, we have pre-assembled most of your AeroPilates Performer XP615 at the factory with the exception of those few parts left unassembled for shipping purposes. Simply follow the few assembly instructions set forth in this ...
Page 4 - BEFORE YOU BEGIN; T h an k y o u fo r c h o o s i n g t h e
BEFORE YOU BEGIN THE FOLLOWING TOOLS ARE REQUIRED FOR ASSEMBLY : Combination Wrench Socket Wrench Front Frame Foam Pad Head Rest Pulley Assembly Front Cover Hand Strap Wheels Locking Knob CardioRebounder Rear Cover Tension Cords Rear Frame 4 Grip Pad Rope Hand Strap Cushion Grip Pad Floor Mat T h an...
Page 5 - Rubber Foot; H A RDWA R E I D E N T I F I C AT I O N C H A RT; INCHES
5 Part No. and Description Qty 51 Washer (M8) 6 47 Nylock Nut (M8 x 1.25) 2 41 Screw, Round Head (M5 x 0.8 x 25mm) 4 29 Rubber Foot 4 55 Locking Knob 2 28 Wheel 2 H A RDWA R E I D E N T I F I C AT I O N C H A RT This chart is provided to help identify the hardware used in the assembly process. Place...
Page 6 - ASSEMBLY INSTRUCTIONS; CONNECTION
ASSEMBLY INSTRUCTIONS Place all parts from the box in a cleared area and position them on the floor in front of you. Remove allpacking materials from your area and place them back into the box. Do not dispose of the packing materialsuntil assembly is completed. Read each step carefully before beginn...
Page 7 - MAIN FRAME ASSEMBLY
ASSEMBLY INSTRUCTIONS 7 STEP 2 Remove your AeroPilates Performer XP615 from its packaging placing the product on its side, with the LOCKING PIN(30) side upward. Remove the LOCKING PIN(30) and unfold the MAIN FRAME ASSEMBLY separating the half that has the attached LOCKING PIN(30). When completed, th...
Page 8 - AeroPilates; FRONT
STEP 5 Remove the paper covering from the foam tape inside the FRONT COVER(7) and REAR COVER(8). Place the FRONT COVER(7) over the FRONT FRAME(1). Place the REAR COVER(8) over the REAR FRAME(2). Press the covers securely in place. NOTE: 8 ASSEMBLY INSTRUCTIONS The securing SCREWS(M6x1x35mm)(42) for ...
Page 11 - STORAGE; CARRIAGE
STORAGE To store the AeroPilates Performer XP615 simply keep it in a clean dry place. The AeroPilates Performer XP615 can be folded as illustrated for easy storage. Please follow the following process: Remove the AeroPilates Performer XP615 from its Stand. Refer to page 6 and revert the procedure to...
Page 12 - MAINTENANCE; PLASTIC
MAINTENANCE 12 The safety and integrity designed into the AeroPilates Performer XP615 can only be maintained when the AeroPilates Performer XP615 is regularly examined for damage and wear. Special attention should be given to the following: It is the sole responsibility of the user/owner to ensure t...
Page 13 - CONDITIONING GUIDELINES; Have your doctor review your training and diet programs.
13 CONDITIONING GUIDELINES How you begin your exercise program depends on your physical condition. If you have been inactive forseveral years or are severely overweight, start slowly and increase your workout time gradually. Increaseyour workout intensity gradually, too, by monitoring your heart rat...
Page 14 - gently; pull the upper
14 WARM-UP and COOL-DOWN Warm-up The purpose of warming up is to prepare your body for exercise and to minimize injuries. Warm up for two to five minutes before strength-training or aerobic exercising. Perform activities that raise yourheart rate and warm the working muscles. Activities may include ...
Page 15 - THIS WARRANTY SHALL NOT; or call us at; IF ANY PART OF THE PRODUCT IS NOT IN COMPLIANCE WITH THIS LIMITED; In the event that the purchaser makes any claim under this; SHALL NOT BE LIABLE FOR THE LOSS OF USE OF ANY PRODUCT, LOSS OF; WARRANTY
Stamina Products, Inc. warrants that this product will be free from defects in materials and workmanshipunder normal use, service and proper operation for a period of 90 days on the parts and five years on theframe from the date of the original purchase from an authorized retailer. THIS WARRANTY SHA...
Page 16 - PRODUCT PARTS DRAWING
Page 17 - PARTS LIST; PART NAME
PARTS LIST DIAGRAM# PART NAME QTY 1 Front Frame 1 2 Rear Frame 1 3 Front Left Side Rail 1 4 Front Right Side Rail 1 5 Rear Left Side Rail 1 6 Rear Right Side Rail 1 7 Front Cover 1 8 Rear Cover 1 9 U Shaped Handle 1 10 Foot Rest 1 11 Foam Sleeve 1 12 Carriage 1 13 Roller 4 14 Roller Spacer 4 15 Tens...
Page 19 - FAX/MAIL ORDERING FORM; Our Customer Service; DESCRIPTION
IMPORTANT : Before filling out the form below make sure you have the right information. Refer to the parts list to make sure you're ordering the right parts! Detach and Mail or Fax the Form Below Stamina Products, Inc. P.O. Box 1071 Springfield, MO 65801-1071 IMPORTANT : We must have your phone numb...