Stamina 55-1537C - Manuals - manualsarea.com

Page 3 - CALL US FIRST; THANK YOU FOR PURCHASING THE

CALL US FIRST 3 THANK YOU FOR PURCHASING THE Elite Inversion System To help you get started, we have pre-assembled most of your Elite Inversion System at the factory with the exception of those parts left unassembled for shipping purposes. Simply follow the few assembly instructions set forth in thi...

Page 4 - BEFORE YOU BEGIN; Thank you for choosing the; We take great pride in producing this; Elite Inversion; provides a convenient and simple method; Elite

BEFORE YOU BEGIN Thank you for choosing the Elite Inversion System. We take great pride in producing this quality product and hope it will provide many hoursof quality exercise to make you feel better, look betterand enjoy life to its fullest. Yes, it's a proven fact that a regular exerciseprogram c...

Page 5 - H A RDWA R E I D E N T I F I C AT I O N C H A RT; INCHES

5 Part No. and Description Qty 59 Bolt, Button Head (M6 x 1 x 35mm) 1 60 Bolt, Button Head (M6 x 1 x 47mm) 1 62 Bolt, Button Head (M8 x 1.25 x 15mm) 4 63 Bolt, Button Head (M8 x 1.25 x 50mm) 2 64 Bolt, Button Head (M8 x 1.25 x 55mm) 2 79 Bolt, Button Head (M10 x 1.5 x 60mm) 2 66 Nylock Nut (M6 x 1) ...

Page 6 - ASSEMBLY INSTRUCTIONS; LEFT

ASSEMBLY INSTRUCTIONS Place all parts from the box in a cleared area and position them on the floor in front of you. Remove allpacking materials from your area and place them back into the box. Do not dispose of the packing materialsuntil assembly is completed. Read each step carefully before beginn...

Page 9 - NYLOCK

STEP 7: Attach the FOOTREST(11) onto the HEIGHT ADJUSTMENT BEAM(10) with the adjustment holes facing down. Secure the FOOTREST(11) in place with the ADJUSTMENT KNOB(12). NOTE: ASSEMBLY INSTRUCTIONS 9 The four adjustment holes in the FOOTREST(11) allow the FOOTREST(11) to be attached in four differen...

Page 10 - LOCKING KNOB

ASSEMBLY INSTRUCTIONS 10 STEP 10 Install the HEIGHT ADJUSTMENT BEAM(10) into MAIN FRAME(92) by pulling the SPRING PIN(35) on the MAIN FRAME(92) and inserting the HEIGHT ADJUSTMENT BEAM(10) as shown. For added safety, thread the LOCKING KNOB (3/8"-16 x 3/4") (36) into back side of the MAIN FR...

Page 12 - THE HANDRAILS

OPERATIONAL INSTRUCTIONS HEEL HOLDER USE AND ADJUSTMENT Place your feet on the FOOTREST(11) with your ankles between the HEEL HOLDERS(15) and FOAM PADS(18). The HEIGHT ADJUSTMENT BEAM(10) includes a LEVER(23) to grip and release your feet. Pull the LEVER(23) toward you until your ankles are securely...

Page 14 - HANDRAILS; LOCKING THE BED; RECOVERY FROM LOCKED POSITION

OPERATIONAL INSTRUCTIONS SUGGESTIONS FOR USE Begin slowly: invert with the least amount of inversion angle to begin with. Stay inverted only as long asyou are comfortable. Return upright slowly.Make gradual changes: increase the angle only if it is comfortable. Increase the angle only one adjustment...

Page 16 - PRODUCT PARTS DRAWING; BACK

Page 19 - LIMITED WARRANTY; WARRANTY; THIS WARRANTY SHALL NOT; or call us at; IF ANY PART OF THE PRODUCT IS NOT IN COMPLIANCE WITH THIS LIMITED; In the event that the purchaser makes any claim under this; SHALL NOT BE LIABLE FOR THE LOSS OF USE OF ANY PRODUCT, LOSS OF

LIMITED WARRANTY MODEL 55-1537C WARRANTY 19 Stamina Products, Inc. warrants that this product will be free from defects in materials and workmanshipunder normal use, service and proper operation for a period of 90 days on the parts and 5 years on theframe from the date of the original purchase from ...

Page 20 - NOTES

Page 22 - FAX/MAIL ORDERING FORM; Our Customer Service; DESCRIPTION

IMPORTANT : Before filling out the form below make sure you have the right information. Refer to the parts list to make sure you're ordering the right parts! Detach and Mail or Fax the Form Below Stamina Products, Inc. P.O. Box 1071 Springfield, MO 65801-1071 IMPORTANT : We must have your phone numb...