South Bend SB1044 - Manuals

South Bend SB1044 – Manual in PDF format online.

Manuals:

Manual South Bend SB1044

1 Page 1
2 Page 2
3 Page 3
4 Page 4
5 Page 5
6 Page 6
7 Page 7
8 Page 8

Summary

Page 2 - I N S T R U C T I O N S; Installation; For Power Connection; Figure 2. Cutting fluid system installation.; To install the cutting fluid kit:

-2- Mfg. Since 6/10 Model SB1044 I N S T R U C T I O N S Installation During the installation process of your cutting fluid kit, you'll need the following items: For Power Connection • A power source that meets the minimum circuit requirements for this machine. • A qualified electrician to ensure a ...

Page 3 - Operation; To use the cutting fluid system:; Coolant Switch

Mfg. Since 6/10 Model SB1044 -3- I N S T R U C T I O N S Operation Only use high quality water-soluble cutting fluid in this system. Never attempt to pump straight cutting oils or kerosene. If you do, the higher viscosity of the oil will overload the motor, causing damage, or flammable liquids may i...

Page 4 - Maintenance; Qty; To change the cutting fluid:; Leaving the pump running with an empty

-4- Mfg. Since 6/10 Model SB1044 I N S T R U C T I O N S Maintenance When you replace the old cutting fluid, take the time to thoroughly clean out both sides of the tank. Make sure to dispose all old fluid according to local regulations. Cutting fluid is considered hazardous waste by the EPA. Follow...

South Bend Manuals