Page 2 - Installation; IMPORTANT SAFETY; SAVE THESE INSTRUCTIONS
Installation 2 TRANSLATION OF THE ORIGINAL INSTRUCTIONS 1. IMPORTANT SAFETY INSTRUCTIONS SAVE THESE INSTRUCTIONS Before using the appliance, carefully read all the instructions contained in this manual . During installation, take care not to injure yourself on the sharp edges of the appliance: w...
Page 10 - Water supply pressure; Appliance dimensions
Installation 10 2. INSTALLATION AND HOOK-UP 2.1 Technical characteristics Water supply pressure min. 0,05 - max. 0,9 MPa (min. 0.5 – max. 9 bar) Water supply temperature max. 140°F – 60°C Capacity 12-13 standard place settings Class of protection against moisture IPX0 Protection against electric sho...
Page 15 - Electrical connection; This appliance must be grounded. In the event of a
Installation 15 2.4 Electrical connection Check that the voltage and the frequency of the mains match the ratings on the name plate of the appliance positioned on the inner edge of the door. This appliance must be grounded. In the event of a malfunction or breakdown, grounding will reduce the risk...
Page 17 - User instructions; DESCRIPTION OF THE CONTROLS
User instructions 17 3. DESCRIPTION OF THE CONTROLS 3.1 Upper panel All the dishwasher controls are grouped on the upper panel. Switch-on, programming, switch-off, etc. procedures are only possible when the door is open. 1 ON/OFF BUTTON 2 SELECTED PROGRAM INDICATOR LIGHTS Illumination of this light ...
Page 18 - PROGRAMS TABLE; Switching on
User instructions 18 PROGRAMS TABLE Program P re -w as h W as h R in se D ry in g (1 ) D u ra ti o n ( m in ) W at er c o n su m p ti o n (l it e rs /c yc le ) (1 ) E n er g y c o n s u m p ti o n (K W h /c y cl e) P1 HALF LOAD - 65°C (149°F) cold 70°C (158°F) ● 82 12,9l 3,4gal. 1,10 P2 NORMAL (2) -...
Page 19 - EXTRA DRY; DELAY; Allows you to delay the start time of the wash cycle by 3, 6,
User instructions 19 1 – The cycle times and electrical energy listed use and care manual are based on normal soil loads and 120°F (49°C) incoming water and will vary based on your actual conditions. 2 – Program for energy star. 3- Only “POTS & PANS” program conforms to NSF std 184 and is certif...
Page 20 - OPERATING INSTRUCTIONS; Adding the rinse aid
User instructions 20 4 OPERATING INSTRUCTIONS After having installed the dishwasher, remove the basket retainers. 4.1 Adding the salt The salt prevents the formation of scale deposits. Unscrew the cap of the salt container. Only for the first time, fill the container with a litre of water. Pou...
Page 21 - CLEANING AND MAINTENANCE
User instructions 21 5 CLEANING AND MAINTENANCE Before carrying out any work, always unplug the appliance from the electrical supply or switch off the omnipolar circuit breaker. CLEANING THE WATER INTAKE FILTER Close the water supply tap, unscrew the end of the water intake hose, remove the filter A...