Smeg SPR30UIMX - Manuals

Important Safety Instructions 10 • Remove the oven door from any unused oven if it is to be stored or discarded. • Do not touch a hot oven light bulb with a damp cloth. Doing so could cause the bulb to break. Handle halogen lights (if provided) with paper towels or soft gloves. • Disconnect the appl...

Important Safety Instructions 11 EN How to read the user manual This user manual uses the following reading conventions: 1. Use instruction sequence.• Single use instructions. SAVE THESE INSTRUCTIONS Instructions General information on this user manual, on safety and final disposal. Description Desc...

Description 12 1 Description 1.1 General Description 1 Cooktop 2 Control panel 3 Seal 4 Temperature probe socket 5 Oven lights 6 Door 7 Fan Rack/tray support frame shelf

Description 13 EN 1.2 Cooktop * Power levels are approximate and can vary according to the pan used or the settings made. Advantages of induction cooking • Energy saving thanks to the direct transmission of energy to the pan (suitable magnetisable cookware is required) compared to traditional electr...

Description 14 1.3 Control panel 1 Cooktop cooking zones knobs Used for turning on the cooking zones and adjusting the power levels.The following markings appear on each cooktop knob: cooking zone OFF position; , , Melting, Keep Warm and Simmering functions; cooking zones power levels; Boost mode. O...

Description 15 EN 1.4 Other parts Shelves The appliance is fitted with shelf supports to position trays and racks at different heights. The insertion heights are indicated from the bottom upwards (see 1.1 General Description). Interior lighting The appliance’s interior lighting comes on:• When the d...

Description 16 Protective cover Used to cover and protect the temperature probe socket when the temperature probe is not in use. NOTE : Some models are not provided with all accessories. NOTE : The accessories intended to come into contact with food are made of materials that comply with the provisi...

Use 17 EN 2 Use 2.1 Instructions High temperature inside the oven during use Danger of burns • Keep the oven door closed during cooking. • Protect your hands by wearing oven gloves when moving food inside the oven. • Do not touch the heating elements inside the oven. • Do not pour water directly ont...

Use 18 First-time use of the range 1. Remove any protective film from the outside or inside of the appliance, including accessories. 2. Remove any labels (apart from the technical data plate) from the accessories and from the oven cavity. 3. Remove and wash all the appliance accessories (see 3 Clean...

Use 19 EN Sounds are less likely to occur with heavier, higher quality cookware. An induction cooktop may also produce faint clicking sounds from the electronic switches that maintain the desired cooking temperature. You may also hear a fan that cools the electronics inside the cooktop. 2.2 Using th...

Use 20 Earthenware • Follow the manufacturer’s instructions.• Use low heat settings. Porcelain enameled steel or cast iron • See stainless steel or cast iron. Stainless steel • Heats quickly but unevenly.• Stainless steel cookware with an aluminum or copper core or bottom provides even heating. To s...

Use 21 EN Limiting the cooking duration The hob has an automatic device which limits the duration of use. If the cooking zone settings are not changed, the maximum duration of operation for each zone depends on the power level selected. When the device for limiting the duration of use is activated, ...

Use 22 Switching the cooking zones on To switch on a cooking zone simply push in then turn left one of the cooktop cooking zone knobs until its power level digit appears on the cooktop display.To switch a cooking zone off turn the relative knob to the OFF ( 0 ) position. Power levels The power in th...

Use 23 EN Heating accelerator function This function allows you to bring the cooking zone to the selected power level more quickly than when selecting the power level.To activate the Heating accelerator function:1. Press and hold a cooking zone knob.2. Keep the knob pressed and turn it counterclockw...

Use 24 Now both cooking zone displays shows level 0 and flashing red dots appear on all displays. The Bridge function is now activated. You can control both the linked zones using the front left cooking zone knob. To deactivate the Bridge function, bring both knobs to the OFF position. Control lock ...

Use 26 2.5 Programming clock Value decrease key Clock key Value increase key STEAM CLEAN This function makes cleaning easier using the steam produced by a little quantity of water poured onto the appropriate groove placed on the bottom (see “Steam clean function”). DEFROST (Rapid) Rapid defrost is a...

Use 27 EN Setting the time On the first use, or after a power failure, the digits will be flashing on the appliance’s display. 1. Keep the clock key for two seconds. The dot between the hours and the minutes flashes. 2. The time can be set via the value increase key and value decrease key . Keep the...

Use 28 Timed cooking 1. Keep the clock key pressed for a few seconds. The display shows the figures and the symbol flashing between the hours and minutes. 2. Press the clock key again. On the display the digit appear alternating with the digit and the symbol flashing under the minutes. 3. Use the va...

Use 29 EN Programmed cooking 1. Set the cooking time as described in the previous point “Timed cooking”. 2. Press the clock key again. On the display the digit appear alternating with the current timen digit and the symbol flashing under the minutes. 3. Use the value increase and value decrease to s...

Use 30 2.6 Using the temperature probe With the temperature probe, roasts, pork loin and various cuts and sizes of meat can be cooked to perfection.The probe, in fact, allows foods to be cooked to perfection because it accurately monitors the core temperature of the food.The core temperature of the ...

Use 31 EN Positioning the probe 1. Place the food on a tray.2. Insert the tip of the probe into the food before placing it in the oven. 3. For best results, make sure that the temperature probe is placed transversely in the thickest part of the food and for least 3/4 of its length. Make sure that it...

Use 32 4. Close the door. 5. Press the button for a few seconds; Press the button again. The default target temperature 176°F (80°C) is indicated on the display and the symbol flashes. 6. Use the and buttons to regulate the target temperature to a value between the minimum and a maximum. 7. Wait for...

Use 33 EN At the end of cooking When the set target temperature for the temperature probe is reached, the heating elements are switched off and the appliance emits a series of beeps. 1. Press a button on the programmer clock to stop the buzzer. 2. Open the door. 3. Remove the probe from the food and...

Use 34 Tips for cooking on two shelves: • Use a fan-assisted function to achieve uniform cooking at several levels. Use shelves 2 and 4. • It is recommended to use 2 racks (can be requested from Authorized Assistance Centers). • To facilitate the flow of air, place the molds/pans in the center of th...

Use 35 EN Cooking information table Preh = preheatingRunner = position from the bottom Food Weight (Kg) Runner Function Preh Temperature (°F) Time (minutes) MEAT Roast chicken 1.2 2 - 3 CONV BAKE Yes 450 65 - 70 Roast loin* 1.5 2 - 3 CONV BAKE Yes 430 65 - 75 * in a pan on a rack. DESSERTS White cak...

Use 36 Temperature probe-cooking information table Type and cut of meat Target temperature (°C) Target temperature (°F) Beef Roast beef: rare 50 - 53 122 - 127 Roast beef: medium 55 - 58 131 - 136 Roast beef: well done 65 - 70 149 - 158 Rib of beef: rare* 50 122 Rib of beef: medium* 58 136 Rib of be...

Cleaning and Maintenance 37 EN 3 Cleaning and maintenance 3.1 Instructions Recommendations To keep the surfaces in good condition, they should be cleaned regularly after use. Let them cool first. Regular daily cleaning Always use only specific products that do not contain abrasives or chlorine-based...

Cleaning and Maintenance 38 3.2 Cleaning the cooktop Cleaning the glass ceramic surface Light coloured marks from pans with aluminium bases can be easily cleaned off with a cloth moistened in vinegar. After cooking, remove any burnt residues; rinse with water and dry thoroughly with a clean cloth. D...

Cleaning and Maintenance 39 EN Removing the oven door To facilitate cleaning, we recommend that you remove the door and place it on a towel.To remove the door, proceed as follows:1. Open the door completely and insert two pins into the holes in the hinges, as shown in the image. 2. Grasp the door on...

Cleaning and Maintenance 40 2. Then pull the front part of the glass panel upwards ( 2 ). This way, the four pins attached to the glass panel are disengaged from their grooves in the door. 3. Remove the intermediate glass pane by lifting it upwards. 4. Clean the external glass panel and the one you ...

Cleaning and Maintenance 41 EN Removal of the rack/tray supports Removing the guide frames makes it easier to clean the sides of the oven.To remove the guide frames:• Pull the frame towards the inside of the oven to unhook it from its housing A , and then slide it out of the grooves at the back B . ...

Cleaning and Maintenance 42 4. Remove the water left inside the oven. For improved hygiene and to avoid food being affected by any unpleasant odours, we recommend that the oven is dried using a convection function at 300°F for approximately 10 minutes. 3.5 Special maintenance Seal maintenance tips T...

Cleaning and Maintenance 43 EN 6. Reattach the cover. Leave the inside of the glass molding ( A ) facing the door. 7. Press the cover firmly so that it adheres tightly to the light bulb holder.