Smeg LSPU8643WH - Manuals - manualsarea.com

Page 2 - Installation; INSTRUCTIONS; SAVE THESE INSTRUCTIONS

Installation 2 TRANSLATION OF THE ORIGINAL INSTRUCTIONS 1. IMPORTANT SAFETY INSTRUCTIONS SAVE THESE INSTRUCTIONS  Before using the appliance, carefully read all the instructions contained in this manual .  During installation, take care not to injure yourself on the sharp edges of the appliance: w...

Page 10 - Water supply pressure; Appliance dimensions

Installation 10 2. INSTALLATION AND HOOK-UP 2.1 Technical characteristics Water supply pressure min. 0,05 - max. 0,9 MPa (min. 0.5 – max. 9 bar) Water supply temperature max. 140°F – 60°C Capacity 12-13 standard place settings Class of protection against moisture IPX0 Protection against electric sho...

Page 16 - Electrical connection; Check that the voltage and the frequency of

Installation 16 2.4 Electrical connection  Check that the voltage and the frequency of the mains match the ratings on the name plate of the appliance positioned on the inner edge of the door.  This appliance must be grounded. In the event of a malfunction or breakdown, grounding will reduce the ri...

Page 19 - User instructions; Information display

User instructions 19 3.2 Information display The dishwasher is equipped with a practical DISPLAY which provides information on the programmed dishwasher functions. Rinse aid lack warning indicator Salt lack warning indicator End of cycle signal Shows that sanitation has been completed. 000 Delayed s...

Page 22 - PROGRAMS TABLE

User instructions 22 PROGRAMS TABLE Program P re -w as h W as h R in se D ry in g (1 ) D u ra ti o n ( m in ) W at er c o n su m p ti o n (l it e rs /c yc le ) (1 ) E n er g y c o n s u m p ti o n (K W h /c y cl e) P1 SOAK cold - - - - 15 4.5l 1,19 gal. 0,02 P2(**) CRYSTAL & CHINA - 45°C (113°F)...

Page 23 - Switching on

User instructions 23 1 – The cycle times and electrical energy listed use and care manual are based on normal soil loads and 120°F (49°C) incoming water and will vary based on your actual conditions. 2 – Program for energy star; the DRY ASSIST option must be enabled . 3- Only “POTS & PANS” progr...

Page 25 - Allows you to wash just a few dishes when distributed

User instructions 25 Option Description 1 SPECIAL Creates additional programs. 2 DRY ASSIST Allows the dishes to be dried perfectly even at low rinse temperatures, with significant energy savings. It starts automatically if the selected program is compatible with it. If it is not required, press the...

Page 26 - OPERATING INSTRUCTIONS; Adding the rinse aid

User instructions 26 4. OPERATING INSTRUCTIONS After having installed the dishwasher, remove the basket retainers. 4.1 Adding the salt The salt prevents the formation of scale deposits.  Unscrew the cap of the salt container.  Only for the first time, fill the container with a litre of water.  Po...

Page 27 - CLEANING AND MAINTENANCE

User instructions 27 5. CLEANING AND MAINTENANCE Before carrying out any work, always unplug the appliance from the electrical supply or switch off the omnipolar circuit breaker. CLEANING THE WATER INTAKE FILTER Close the water supply tap, unscrew the end of the water intake hose, remove the filter ...