SMC Networks SMCG55 - Manuals

Page 2 - User Guide; From SMC’s EZ line of low-cost workgroup LAN solutions

EZ Switch 10/100/1000 User Guide From SMC’s EZ line of low-cost workgroup LAN solutions May 2005 Pub #: 150000018400H R01 38 TeslaIrvine, CA 92618Phone: (949) 679-8000

Page 3 - Copyright

Copyright Information furnished by SMC Networks, Inc. (SMC) is believed to be accurate and reliable. However, no responsibility is assumed by SMC for its use, nor for any infringements of patents or other rights of third parties which may result from its use. No license is granted by implication or ...

Page 6 - OMPLIANCES; EC Conformance Declaration - Class B

C OMPLIANCES FCC - Class B This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment gene...

Page 7 - Industry Canada - Class B

Industry Canada - Class B This digital apparatus does not exceed the Class A limits for radio noise emissions from digital apparatus as set out in the interference-causing equipment standard entitled “Digital Apparatus,” ICES-003 of the Department of Communications.Cet appareil numérique respecte le...

Page 14 - Environmental Statement; End of Product Life Span; Purpose

Environmental Statement The manufacturer of this product endeavours to sustain an environmentally-friendly policy throughout the entire production process. This is achieved though the following means:• Adherence to national legislation and regulations on environmental production standards. • Conserv...

Page 15 - Safety Compliance

Safety Compliance Underwriters Laboratories Compliance State-ment Important! Before making connections, make sure you have the correct cord set. Check it (read the label on the cable) against the following: The unit automatically matches the connected input voltage. Therefore, no additional adjustme...

Page 16 - Contents

Contents INTRODUCTION 1 Description of Hardware 1 Features and Benefits 1 Front Panel RJ-45 Ports 2 SMCGS5 Front and Rear Panels 3 SMCGS8 Front and Rear Panels 4 Rear Panel 4 INSTALLING THE SWITCH 5 Package Checklist 5 Selecting a Site 5 Instructions 6 APPLICATION EXAMPLE 8 TROUBLESHOOTING 9 SPECIFI...

Page 18 - Features and Benefits; Front Panel RJ-45 Ports

EZ Switch 10/100/1000 1 INTRODUCTION The EZ Switch 10/100/1000, SMCGS5 and SMCGS8, are high-performance Gigabit Ethernet switches designed for delivering Gigabit connectivity to the desktop. It provides 5/8 full-duplex 1000BASE-T ports that significantly improve network performance and boost through...

Page 19 - Front Panel LEDs; SMCGS5 Front and Rear Panels; Condition

EZ Switch 10/100/1000 2 Front Panel LEDs The front panel of the switch provides status LEDs for “at-a-glance” system monitoring. The following table details the functions of the various indicators. SMCGS5 Front and Rear Panels Port and System Status LEDsLED Condition Status Power On Power on, normal...

Page 20 - SMCGS8 Front and Rear Panels; Rear Panel

EZ Switch 10/100/1000 3 SMCGS8 Front and Rear Panels Rear Panel The DC power socket is located on the rear panel of the switch.

Page 21 - Package Checklist

EZ Switch 10/100/1000 4 INSTALLING THE SWITCH Before installing the switch, verify that you have all the items listed under “Package Contents.” If any of the items are missing or damaged, contact your local SMC distributor. Also be sure you have all the necessary tools and cabling before installing ...

Page 22 - Instructions; Positioning the Switch:; Cascading Switches and Other Network Devices:

EZ Switch 10/100/1000 5 • There should be adequate space (approximately two inches) on all sides for proper air flow. • Make sure twisted-pair cable is always routed away from power lines, fluorescent lighting fixtures and other sources of electrical interference such as radios, transmitters, etc. •...

Page 25 - ROUBLESHOOTING; Diagnosing Switch Indicators; Probable Causes

EZ Switch 10/100/1000 8 T ROUBLESHOOTING Diagnosing Switch Indicators 1. Symptom Power LED does not light after power on. Probable Causes • DC power socket may be defective. Possible Solutions • Check for loose connections.• Check the power outlet by using it for another device. 2. Symptom Link LED ...

Page 26 - PECIFICATIONS

EZ Switch 10/100/1000 9 S PECIFICATIONS EZ Switch 10/100/1000 Standards Conformance IEEE 802.3IEEE 802.3uIEEE 802.3xIEEE 802.3ab Communication Rate 10, 100, and 1000 Mbps Communication Mode Full or half duplex at 10/100 MbpsFull duplex at 1000 Mbps Media Supported 10BASE-T: 100-ohm Category 3 or bet...