Page 2 - BEFORE YOU INSTALL – please read; will apply for service and parts.; CAUTION
The symbol on the product or on its packaging indicates that this product may not be treated as house-hold waste. Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will h...
Min. 600mm - Max. 650mm for induction cooktops. Min. 600mm - Max. 750mm gas cooktops. If the rangehood is positioned above the max height recommended, warranty may be compromised as performance of the rangehood will be affected.Measurement is taken from the top of the trivets to the underside of the...
Page 4 - SLTC919 series INSTALLATION; NOTE
Remove the grease filters before installing the product, in order to avoid to damage the appliance. Open the glass by rotating it as shown in fig. 3; then remove the grease filters by acting on their specific handle and rotate them to remove them from their seating.Make an opening on the kitchen cab...
Page 5 - Before connecting any ducting to the motor,
• Rotate the steel bar, including the LED bar, to remove it from its seating (Fig. 6 - 7). You can electronically disconnect the bar by disconnecting the specific connector. • Refit the stainless steel bar previously removed, connect the LED bar electrically by means of the specifc connector, and th...
Page 6 - MAINTENANCE; LED Bar replacement; OPERATION
• Accurate maintenance guarantees good functioning and long-lasting performance. • Particular care is due to the grease filter panel. It can be removed by pushing its handle toward the back side of the rangehood and pulling the filter downwards so to unfasten it from its slot (Fig.3). To insert the ...